kernel/linux.git/drivers/iio/magnetometer, branch v6.12.80

iio: magnetometer: Remove IRQF_ONESHOT

2026-03-04T12:21:26+00:00

[ Upstream commit a54e9440925e6617c98669066b4753c4cdcea8a0 ] Passing IRQF_ONESHOT ensures that the interrupt source is masked until the secondary (threaded) handler is done. If only a primary handler is used then the flag makes no sense because the interrupt can not fire (again) while its handler is running. The flag also disallows force-threading of the primary handler and the irq-core will warn about this. The force-threading functionality is required on PREEMPT_RT because the handler is using locks with can sleep on PREEMPT_RT. Remove IRQF_ONESHOT from irqflags. Tested-by: Geert Uytterhoeven Signed-off-by: Sebastian Andrzej Siewior Reviewed-by: Andy Shevchenko Reviewed-by: Nuno Sá Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin

iio: magnetometer: fix if () scoped_guard() formatting

2024-12-14T19:03:38+00:00

commit 9a884bdb6e9560c6da44052d5248e89d78c983a6 upstream. Add mising braces after an if condition that contains scoped_guard(). This style is both preferred and necessary here, to fix warning after scoped_guard() change in commit fcc22ac5baf0 ("cleanup: Adjust scoped_guard() macros to avoid potential warning") to have if-else inside of the macro. Current (no braces) use in af8133j_set_scale() yields the following warnings: af8133j.c:315:12: warning: suggest explicit braces to avoid ambiguous 'else' [-Wdangling-else] af8133j.c:316:3: warning: add explicit braces to avoid dangling else [-Wdangling-else] Fixes: fcc22ac5baf0 ("cleanup: Adjust scoped_guard() macros to avoid potential warning") Closes: https://lore.kernel.org/oe-kbuild-all/202409270848.tTpyEAR7-lkp@intel.com/ Reported-by: kernel test robot Signed-off-by: Stephen Rothwell Signed-off-by: Przemek Kitszel Signed-off-by: Peter Zijlstra (Intel) Acked-by: Jonathan Cameron Link: https://lore.kernel.org/r/20241108154258.21411-1-przemyslaw.kitszel@intel.com Signed-off-by: Greg Kroah-Hartman

iio: magnetometer: yas530: use signed integer type for clamp limits

2024-12-14T19:03:19+00:00

[ Upstream commit f1ee5483e40881d8ad5a63aa148b753b5c6a839b ] In the function yas537_measure() there is a clamp_val() with limits of -BIT(13) and BIT(13) - 1. The input clamp value h[] is of type s32. The BIT() is of type unsigned long integer due to its define in include/vdso/bits.h. The lower limit -BIT(13) is recognized as -8192 but expressed as an unsigned long integer. The size of an unsigned long integer differs between 32-bit and 64-bit architectures. Converting this to type s32 may lead to undesired behavior. Additionally, in the calculation lines h[0], h[1] and h[2] the unsigned long integer divisor BIT(13) causes an unsigned division, shifting the left-hand side of the equation back and forth, possibly ending up in large positive values instead of negative values on 32-bit architectures. To solve those two issues, declare a signed integer with a value of BIT(13). There is another omission in the clamp line: clamp_val() returns a value and it's going nowhere here. Self-assign it to h[i] to make use of the clamp macro. Finally, replace clamp_val() macro by clamp() because after changing the limits from type unsigned long integer to signed integer it's fine that way. Link: https://lkml.kernel.org/r/11609b2243c295d65ab4d47e78c239d61ad6be75.1732914810.git.jahau@rocketmail.com Fixes: 65f79b501030 ("iio: magnetometer: yas530: Add YAS537 variant") Signed-off-by: Jakob Hauser Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202411230458.dhZwh3TT-lkp@intel.com/ Closes: https://lore.kernel.org/oe-kbuild-all/202411282222.oF0B4110-lkp@intel.com/ Reviewed-by: David Laight Acked-by: Jonathan Cameron Cc: Lars-Peter Clausen Cc: Linus Walleij Signed-off-by: Andrew Morton Signed-off-by: Sasha Levin

Merge tag 'iio-fixes-for-6.12a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus

2024-10-13T15:23:47+00:00

Jonathan writes: IIO: 1st set of fixes for the 6.12 cycle. Most of this pull request is the result of Javier Carrasco doing a careful audit for missing Kconfig dependencies that luck has meant the random builds have never hit. The rest is the usual mix of old bugs that have surfaced and some fallout from the recent merge window. adi,ad5686 - Fix binding duplication of compatible strings. bosch,bma400 - Fix an uninitialized variable in the event tap handling. bosch,bmi323 - Fix several issues in the register saving and restore on suspend/resume sensiron,spd500 - Fix missing CRC8 dependency ti,op3001 - Fix a missing full-scale range value (values above this point were all reported wrongly) vishay,veml6030 - Fix a segmentation fault due to some type confusion. - Fix wrong ambient light sensor resolution. * tag 'iio-fixes-for-6.12a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (34 commits) iio: frequency: admv4420: fix missing select REMAP_SPI in Kconfig iio: frequency: {admv4420,adrf6780}: format Kconfig entries iio: adc: ad4695: Add missing Kconfig select iio: adc: ti-ads8688: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig iio: hid-sensors: Fix an error handling path in _hid_sensor_set_report_latency() iioc: dac: ltc2664: Fix span variable usage in ltc2664_channel_config() iio: dac: stm32-dac-core: add missing select REGMAP_MMIO in Kconfig iio: dac: ltc1660: add missing select REGMAP_SPI in Kconfig iio: dac: ad5770r: add missing select REGMAP_SPI in Kconfig iio: amplifiers: ada4250: add missing select REGMAP_SPI in Kconfig iio: frequency: adf4377: add missing select REMAP_SPI in Kconfig iio: resolver: ad2s1210: add missing select (TRIGGERED_)BUFFER in Kconfig iio: resolver: ad2s1210 add missing select REGMAP in Kconfig iio: proximity: mb1232: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig iio: pressure: bm1390: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig iio: magnetometer: af8133j: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig iio: light: bu27008: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig iio: chemical: ens160: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig iio: dac: ad5766: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig iio: dac: ad3552r: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig ...

iio: magnetometer: af8133j: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig

2024-10-06T15:29:46+00:00

This driver makes use of triggered buffers, but does not select the required modules. Add the missing 'select IIO_BUFFER' and 'select IIO_TRIGGERED_BUFFER'. Fixes: 1d8f4b04621f ("iio: magnetometer: add a driver for Voltafield AF8133J magnetometer") Signed-off-by: Javier Carrasco Reviewed-by: Andrey Skvortsov Link: https://patch.msgid.link/20241003-iio-select-v1-11-67c0385197cd@gmail.com Cc: Signed-off-by: Jonathan Cameron

move asm/unaligned.h to linux/unaligned.h

2024-10-02T21:23:23+00:00

asm/unaligned.h is always an include of asm-generic/unaligned.h; might as well move that thing to linux/unaligned.h and include that - there's nothing arch-specific in that header. auto-generated by the following: for i in `git grep -l -w asm/unaligned.h`; do sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i done for i in `git grep -l -w asm-generic/unaligned.h`; do sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i done git mv include/asm-generic/unaligned.h include/linux/unaligned.h git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h

iio: magnetometer: ak8975: Add AK09118 support

2024-09-03T17:49:43+00:00

Add additional AK09118 to the magnetometer driver which has the same register mapping and scaling as the AK09112 device. Signed-off-by: Danila Tikhonov Acked-by: Krzysztof Kozlowski Signed-off-by: Barnabás Czémán Link: https://patch.msgid.link/20240819-ak09918-v4-4-f0734d14cfb9@mainlining.org Signed-off-by: Jonathan Cameron

iio: magnetometer: ak8975: Fix reading for ak099xx sensors

2024-09-03T17:49:43+00:00

Move ST2 reading with overflow handling after measurement data reading. ST2 register read have to be read after read measurment data, because it means end of the reading and realease the lock on the data. Remove ST2 read skip on interrupt based waiting because ST2 required to be read out at and of the axis read. Fixes: 57e73a423b1e ("iio: ak8975: add ak09911 and ak09912 support") Signed-off-by: Barnabás Czémán Link: https://patch.msgid.link/20240819-ak09918-v4-2-f0734d14cfb9@mainlining.org Cc: Signed-off-by: Jonathan Cameron

iio: magnetometer: ak8975: Relax failure on unknown id

2024-09-03T17:49:42+00:00

Relax failure when driver gets an unknown device id for allow probe for register compatible devices. Signed-off-by: Barnabás Czémán Link: https://patch.msgid.link/20240819-ak09918-v4-1-f0734d14cfb9@mainlining.org Signed-off-by: Jonathan Cameron

iio: magnetometer: ak8975: drop incorrect AK09116 compatible

2024-08-10T10:17:34+00:00

All compatibles in this binding without prefixes were deprecated, so adding a new deprecated one after some time is not allowed, because it defies the core logic of deprecating things. Drop the AK09916 vendorless compatible. Fixes: 76e28aa97fa0 ("iio: magnetometer: ak8975: add AK09116 support") Signed-off-by: Krzysztof Kozlowski Link: https://patch.msgid.link/20240806053016.6401-1-krzysztof.kozlowski@linaro.org Signed-off-by: Jonathan Cameron