kernel/linux.git/drivers/iio/light, branch v5.6.17

iio: si1133: read 24-bit signed integer for measurement

2020-04-23T08:38:23+00:00

commit 328b50e9a0ad1fe8accdf8c19923deebab5e0c01 upstream. The chip is configured in 24 bit mode. The values read from it must always be treated as is. This fixes the issue by replacing the previous 16 bits value by a 24 bits buffer. This changes affects the value output by previous version of the driver, since the least significant byte was missing. The upper half of 16 bit values previously output are now the upper half of a 24 bit value. Fixes: e01e7eaf37d8 ("iio: light: introduce si1133") Reported-by: Simon Goyette Co-authored-by: Guillaume Champagne Signed-off-by: Maxime Roussin-Bélanger Signed-off-by: Guillaume Champagne Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

Merge tag 'iio-fixes-for-5.6a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

2020-03-18T10:20:42+00:00

Jonathan writes: First set of IIO fixes in the 5.6 cycle. * adxl372 - Fix marking of buffered values as big endian. * ak8974 - Fix wrong handling of negative values when read from sysfs. * at91-sama5d2 - Fix differential mode by ensuring configuration set correctly. * ping - Use the write sensor type for of_ping_match table. * sps30 - Kconfig build dependency fix. * st-sensors - Fix a wrong identification of which part the SMO8840 ACPI ID indicates. * stm32-dsfdm - Fix a sleep in atomic issue by not using a trigger when it makes no sense. * stm32-timer - Make sure master mode is disabled when stopping. * vcnl400 - Update some sampling periods based on new docs. * tag 'iio-fixes-for-5.6a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: iio: ping: set pa_laser_ping_cfg in of_ping_match iio: chemical: sps30: fix missing triggered buffer dependency iio: st_sensors: remap SMO8840 to LIS2DH12 iio: light: vcnl4000: update sampling periods for vcnl4040 iio: light: vcnl4000: update sampling periods for vcnl4200 iio: accel: adxl372: Set iio_chan BE iio: magnetometer: ak8974: Fix negative raw values in sysfs iio: trigger: stm32-timer: disable master mode when stopping iio: adc: stm32-dfsdm: fix sleep in atomic context iio: adc: at91-sama5d2_adc: fix differential channels in triggered mode

iio: light: vcnl4000: update sampling periods for vcnl4040

2020-03-08T16:21:23+00:00

Vishay has published a new version of "Designing the VCNL4200 Into an Application" application note in October 2019. The new version specifies that there is +-20% of part to part tolerance. Although the application note is related to vcnl4200, according to support the vcnl4040's "ASIC is quite similar to that one for the VCNL4200". So update the sampling periods (and comment), including the correct sampling period for proximity. Both sampling periods are lower. Users relying on the blocking behaviour of reading will get proximity measurements much earlier. Fixes: 5a441aade5b3 ("iio: light: vcnl4000 add support for the VCNL4040 proximity and light sensor") Reviewed-by: Guido Günther Tested-by: Guido Günther Signed-off-by: Tomas Novotny Cc: Signed-off-by: Jonathan Cameron

iio: light: vcnl4000: update sampling periods for vcnl4200

2020-03-08T16:21:21+00:00

Vishay has published a new version of "Designing the VCNL4200 Into an Application" application note in October 2019. The new version specifies that there is +-20% of part to part tolerance. This explains the drift seen during experiments. The proximity pulse width is also changed from 32us to 30us. According to the support, the tolerance also applies to ambient light. So update the sampling periods. As the reading is blocking, current users may notice slightly longer response time. Fixes: be38866fbb97 ("iio: vcnl4000: add support for VCNL4200") Reviewed-by: Guido Günther Signed-off-by: Tomas Novotny Cc: Signed-off-by: Jonathan Cameron

Merge tag 'tag-chrome-platform-for-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux

2020-02-04T07:17:41+00:00

Pull chrome platform updates from Benson Leung: "CrOS EC: - Refactoring of some of cros_ec's headers: include/linux/mfd/cros_ec.h now removed, new cros_ec.h added to drivers/platform/chrome which contains shared operations of cros_ec transport drivers. - Response tracing in cros_ec_proto Wilco EC: - Fix unregistration order. - Fix keyboard backlight probing on systems without keyboard backlight - Minor cleanup (newlines in printks, COMPILE_TEST) Misc: - chromeos_laptop converted to use i2c_new_scanned_device instead of i2c_new_probed_device" * tag 'tag-chrome-platform-for-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: platform/chrome: cros_ec: Match implementation with headers platform/chrome: cros_ec: Drop unaligned.h include platform/chrome: wilco_ec: Allow wilco to be compiled in COMPILE_TEST platform/chrome: wilco_ec: Add newlines to printks platform/chrome: wilco_ec: Fix unregistration order cros_ec: treewide: Remove 'include/linux/mfd/cros_ec.h' platform/chrome: cros_ec_ishtp: Make init_lock static platform/chrome: chromeos_laptop: Convert to i2c_new_scanned_device platform/chrome: cros_ec_lpc: Use platform_get_irq_optional() for optional IRQs platform/chrome: cros_ec_proto: Add response tracing platform/chrome: cros_ec_trace: Match trace commands with EC commands

Merge 5.5-rc7 into staging-next

2020-01-22T08:05:34+00:00

We want the staging fixes in here as well Signed-off-by: Greg Kroah-Hartman

iio: light: vcnl4000: Fix scale for vcnl4040

2020-01-13T11:08:40+00:00

According to the data sheet the ambient sensor's scale is 0.12 lux/step (not 0.024 lux/step as used by vcnl4200) when the integration time is 80ms. The integration time is currently hardcoded in the driver to that value. See p. 8 in https://www.vishay.com/docs/84307/designingvcnl4040.pdf Fixes: 5a441aade5b3 ("iio: light: vcnl4000 add support for the VCNL4040 proximity and light sensor") Signed-off-by: Guido Günther Reviewed-by: Marco Felsch Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

Merge tag 'iio-for-5.6a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

2020-01-10T09:44:00+00:00

Jonathan writes: First set of new device support, features and cleanups for IIO in the 5.6 cycle New device support * ad7091r5 ADC - New driver with follow up patch adding scale and vref support. - DT bindings * ad7923 - Support for ad7908, ad7918 and ad7928 added to driver. * bma180 - Support the BMA254 accelerometer. Required fairly substantial rework to allow for small differences between this an existing parts. * bma400 accelerometer - New driver with follow up patch for regulator support. - DT bindings. * asc dlhl60d - New driver support this range of pressure and temperature sensors. - DT bindings. * ltc2496 ADC - New driver to support this ADC. - Split the existing LTC2497 driver generic component out and reuse. - DT bindings. * parallax ping - New driver supporting ultrasonic and laser tof distance sensors. - Bindings for these sensors. New features * core - New char type for read_raw returns, used for thermocouple types. - Rename read_first_n callback to read. The reasons behind the original naming are lost to the mists of time. * ad799x - Allow pm_ops to disable device completely allowing regulator power down. * bma180 - Enable basic regulator support. * dmaengine buffer - Report platform data alignment requirements via new ABI. * max31856 - Add option to set mains filter rejection frequency and document new in_temp_filter_notch_center_frequency ABI. - Add support for configuring HW averaging (oversampling ratio) - Add runtime configuration of thermocouple type and document new ABI. * maxim-thermocouple - Add read only access to thermocouple type using new ABI, includes adding more specific compatibles to reflect which variant of the chip is being used. * mpu6050 - Provide option to support the PMU9150 in package magnetometer directly rather than via auxiliary bus. * stm32_adc - Add overrun interrupt checks to detect if this happens. * st_lsm6dsx - Enable the sensor-hub support for lsm6dsm. Includes various reworks to allow this. Cleanups and minor fixes * Subsystem wide - Tidy up indentation in Kconfig and fix alphabetical order of AD7091R5. - Drop linux/gpio.h and linux/of_gpio.h from drivers that don't use them. * ad7266 - Convert to GPIO descriptors. * ad7303 - Avoid a dance with checking if the regulator is supplied by just using the optional request interface. * ad7887 - Simplify channel specification assignment to enable adding more devices. * ad7923 - Drop some unused and largely pointless defines of BOB_N==N variety. - Tidy up checkpatch warnings. - Add missing of_device_id table. * adf4350 - Convert to GPIO descriptors. * ak8975 - Convert to GPIO descriptors. * ADIS library and drivers - Expand scope of txrx_lock to cover all state and rename as state_lock - Add unlocked read / write to allow grouping of consecutive calls under single lock / unlock. - Add unlocked check_status, reset to allow grouping under single lock / unlock. - Remove remaining uses of core mlock for local state protection. mlock should never be used directly as it protects tightly defined core IIO device management state. * adis16240 - Enforce only supported SPI mode on driver load + add DT binding doc. * atlas-ph-sensor - Rename to atlas-sensor given it now covers things beyond ph sensors. * bma180 - Use local dev variable to tidy up code. - Use c99 style explicity .member assignment to make driver more readable. * bmp280 - Drop ACPI support. No evidence this was used and appropriate ID is not registered. - Allow ACPI to bind device via PRP0001 * dmaengine buffer - Use dma_request_chan instead of dma_request_slave_channel_reason as that ABI is going away. - Add module info to avoid tainting the kernel. * hts221 - Avoid magic number defines when only used to fill structure elements that are self describing. * lm3533 - Drop a stray semicolon. * max9611 - Cleanup enum handling to be more resilient to future changes. * mpu6050 - Delete MPU9150 from supported SPI devices as doesn't provide SPI. - Select I2C_MUX again after kbuild issue fixed elsewhere. * stm32-timer - Drop an unnecessary register update. * ssp_sensors - Convert to GPIO descriptors. * st_sensors - drop !CONFIG_ACPI defines as ACPI_PTR() will stop them being used anyway. - Make default platform data structures __maybe_unsued. - Fill in some missing kernel-doc function parameters. * st_lsm6dsx - white space fixes. - Mark some constants that aren't always used as __maybe_unused. - Drop of ID table guards as they just pervent use under ACPI. - Switch to device properties to allow ACPI usage. * st_uvis25 - Drop acpi.h include as no ACPI APIs used. * ti-ads1015 - Drop legacy platform data as no one seems to be using it. - Use the device property API instead of OF specific. * ti-ads7950 - typo fix in error message. * tag 'iio-for-5.6a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (99 commits) iio: accel: bma180: BMA254 support iio: pressure: bmp280: Allow device to be enumerated from ACPI iio: pressure: bmp280: Drop ACPI support dt-bindings: iio: adc: convert sd modulator to json-schema iio: buffer: rename 'read_first_n' callback to 'read' iio: buffer-dmaengine: Report buffer length requirements bindings: iio: pressure: Add documentation for dlh driver dt-bindings: Add asc vendor iio: pressure: Add driver for DLH pressure sensors iio: buffer-dmaengine: Add module information iio: accel: bma180: Use explicit member assignment iio: accel: bma180: Basic regulator support iio: accel: bma180: Add dev helper variable iio: imu: st_lsm6dsx: enable sensor-hub support for lsm6dsm iio: imu: st_lsm6dsx: rename st_lsm6dsx_shub_read_reg in st_lsm6dsx_shub_read_output iio: imu: st_lsm6dsx: check if shub_output reg is located in primary page iio: imu: st_lsm6dsx: check if pull_up is located in primary page iio: imu: st_lsm6dsx: check if master_enable is located in primary page iio: imu: st_lsm6dsx: export max num of slave devices in st_lsm6dsx_shub_settings iio: light: remove unneeded semicolon ...

cros_ec: treewide: Remove 'include/linux/mfd/cros_ec.h'

2020-01-07T16:36:46+00:00

This header file now only includes the cros_ec_dev struct, however, is the 'include/linux/platform_data/cros_ec_proto.h' who contains the definition of all the Chrome OS EC related structs. There is no reason to have a separate include for this struct so move to the place where other structs are defined. That way, we can remove the include itself, but also simplify the common pattern #include #include for a single include #include The changes to remove the cros_ec.h include were generated with the following shell script: git grep -l "" | xargs sed -i '//d' Signed-off-by: Enric Balletbo i Serra Acked-by: Lee Jones Acked-by: Alexandre Belloni Acked-by: Jonathan Cameron Acked-by: Sebastian Reichel Acked-by: Hans Verkuil

iio: light: remove unneeded semicolon

2019-12-29T15:20:06+00:00

Fixes coccicheck warning: ./drivers/iio/light/lm3533-als.c:745:2-3: Unneeded semicolon Signed-off-by: Chen Zhou Signed-off-by: Jonathan Cameron