kernel/linux.git/drivers/iio/light, branch v5.10.259

iio: light: cm3323: fix reg_conf not being initialized correctly

2026-06-19T11:21:28+00:00

commit 1f4f0bcc5255dec5c4c3a1551bf49d8c33b69b20 upstream. The code stores the return value of i2c_smbus_write_word_data() in data->reg_conf; however, this value represents the result of the write operation and not the value actually written to the configuration register. This meant that the contents of data->reg_conf did not truly reflect the contents of the hardware register. Instead, save the value of the register before the write and use this value in the I2C write. The bug was found by code inspection: i2c_smbus_write_word_data() returns 0 on success, not the value written to the register. Tested using i2c-stub on a Raspberry Pi 3B running a custom 6.19.10 kernel. Before loading the driver, the configuration register 0x00 CM3323_CMD_CONF was populated with 0x0030 using `i2cset -y 11 0x10 0x00 0x0030 w`, encoding an integration time of 320ms in bits[6:4]. Due to incorrect initialization of data->reg_conf in cm3323_init(), the print of integration_time returns 0.040000 instead of the expected 0.320000. This happens because the read of the integration_time depends on cm3323_get_it_bits() that is based on the value of data->reg_conf, which is erroneously set to 0. With this fix applied, data->reg_conf correctly saves 0x0030 after init and the successive integration_time reports 0.320000 as expected. Fixes: 8b0544263761 ("iio: light: Add support for Capella CM3323 color sensor") Cc: stable@vger.kernel.org Signed-off-by: Aldo Conte Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: light: vcnl4035: fix scan buffer on big-endian

2026-04-18T08:31:11+00:00

commit fdc7aa54a5d44c05880a4aad7cfb41aacfd16d7b upstream. Rework vcnl4035_trigger_consumer_handler() so that we are not passing what should be a u16 value as an int * to regmap_read(). This won't work on bit endian systems. Instead, add a new unsigned int variable to pass to regmap_read(). Then copy that value into the buffer struct. The buffer array is replaced with a struct since there is only one value being read. This allows us to use the correct u16 data type and has a side-effect of simplifying the alignment specification. Also fix the endianness of the scan format from little-endian to CPU endianness. Since we are using regmap to read the value, it will be CPU-endian. Fixes: 55707294c4eb ("iio: light: Add support for vishay vcnl4035") Signed-off-by: David Lechner Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: light: bh1780: fix PM runtime leak on error path

2026-04-18T08:30:59+00:00

[ Upstream commit dd72e6c3cdea05cad24e99710939086f7a113fb5 ] Move pm_runtime_put_autosuspend() before the error check to ensure the PM runtime reference count is always decremented after pm_runtime_get_sync(), regardless of whether the read operation succeeds or fails. Fixes: 1f0477f18306 ("iio: light: new driver for the ROHM BH1780") Signed-off-by: Antoniu Miclaus Reviewed-by: Linus Walleij Cc: Signed-off-by: Jonathan Cameron [ moved both pm_runtime_mark_last_busy() and pm_runtime_put_autosuspend() before the error check instead of just pm_runtime_put_autosuspend() ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

iio: light: opt3001: fix deadlock due to concurrent flag access

2025-09-09T16:45:22+00:00

[ Upstream commit f063a28002e3350088b4577c5640882bf4ea17ea ] The threaded IRQ function in this driver is reading the flag twice: once to lock a mutex and once to unlock it. Even though the code setting the flag is designed to prevent it, there are subtle cases where the flag could be true at the mutex_lock stage and false at the mutex_unlock stage. This results in the mutex not being unlocked, resulting in a deadlock. Fix it by making the opt3001_irq() code generally more robust, reading the flag into a variable and using the variable value at both stages. Fixes: 94a9b7b1809f ("iio: light: add support for TI's opt3001 light sensor") Cc: stable@vger.kernel.org Signed-off-by: Luca Ceresoli Link: https://patch.msgid.link/20250321-opt3001-irq-fix-v1-1-6c520d851562@bootlin.com Signed-off-by: Jonathan Cameron [ Adjust context ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

iio: light: as73211: Ensure buffer holes are zeroed

2025-08-28T14:22:58+00:00

[ Upstream commit 433b99e922943efdfd62b9a8e3ad1604838181f2 ] Given that the buffer is copied to a kfifo that ultimately user space can read, ensure we zero it. Fixes: 403e5586b52e ("iio: light: as73211: New driver") Reviewed-by: Matti Vaittinen Reviewed-by: Andy Shevchenko Link: https://patch.msgid.link/20250802164436.515988-2-jic23@kernel.org Cc: Signed-off-by: Jonathan Cameron [ Adjust context ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

iio: hid-sensor-prox: Fix incorrect OFFSET calculation

2025-08-28T14:22:53+00:00

[ Upstream commit 79dabbd505210e41c88060806c92c052496dd61c ] The OFFSET calculation in the prox_read_raw() was incorrectly using the unit exponent, which is intended for SCALE calculations. Remove the incorrect OFFSET calculation and set it to a fixed value of 0. Cc: stable@vger.kernel.org Fixes: 39a3a0138f61 ("iio: hid-sensors: Added Proximity Sensor Driver") Signed-off-by: Zhang Lixu Acked-by: Srinivas Pandruvada Link: https://patch.msgid.link/20250331055022.1149736-4-lixu.zhang@intel.com Signed-off-by: Jonathan Cameron [ adapted prox_attr array access to single structure member access ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

iio: light: as73211: fix channel handling in only-color triggered buffer

2025-03-13T11:47:10+00:00

commit ab09c6cfe01b317f515bcd944668697241a54b9d upstream. The channel index is off by one unit if AS73211_SCAN_MASK_ALL is not set (optimized path for color channel readings), and it must be shifted instead of leaving an empty channel for the temperature when it is off. Once the channel index is fixed, the uninitialized channel must be set to zero to avoid pushing uninitialized data. Add available_scan_masks for all channels and only-color channels to let the IIO core demux and repack the enabled channels. Cc: stable@vger.kernel.org Fixes: 403e5586b52e ("iio: light: as73211: New driver") Tested-by: Christian Eggers Signed-off-by: Javier Carrasco Link: https://patch.msgid.link/20241214-iio_memset_scan_holes-v4-1-260b395b8ed5@gmail.com Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: light: vcnl4035: fix information leak in triggered buffer

2025-02-01T17:22:23+00:00

commit 47b43e53c0a0edf5578d5d12f5fc71c019649279 upstream. The 'buffer' local array is used to push data to userspace from a triggered buffer, but it does not set an initial value for the single data element, which is an u16 aligned to 8 bytes. That leaves at least 4 bytes uninitialized even after writing an integer value with regmap_read(). Initialize the array to zero before using it to avoid pushing uninitialized information to userspace. Cc: stable@vger.kernel.org Fixes: ec90b52c07c0 ("iio: light: vcnl4035: Fix buffer alignment in iio_push_to_buffers_with_timestamp()") Signed-off-by: Javier Carrasco Link: https://patch.msgid.link/20241125-iio_memset_scan_holes-v1-6-0cb6e98d895c@gmail.com Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: light: al3010: Fix an error handling path in al3010_probe()

2024-12-14T18:48:06+00:00

[ Upstream commit a4b7064d34186cf4970fe0333c3b27346cf8f819 ] If i2c_smbus_write_byte_data() fails in al3010_init(), al3010_set_pwr(false) is not called. In order to avoid such a situation, move the devm_add_action_or_reset() witch calls al3010_set_pwr(false) right after a successful al3010_set_pwr(true). Fixes: c36b5195ab70 ("iio: light: add Dyna-Image AL3010 driver") Signed-off-by: Christophe JAILLET Link: https://patch.msgid.link/ee5d10a2dd2b70f29772d5df33774d3974a80f30.1725993353.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin

iio: light: veml6030: fix microlux value calculation

2024-11-08T15:22:03+00:00

commit 63dd163cd61dda6f38343776b42331cc6b7e56e0 upstream. The raw value conversion to obtain a measurement in lux as INT_PLUS_MICRO does not calculate the decimal part properly to display it as micro (in this case microlux). It only calculates the module to obtain the decimal part from a resolution that is 10000 times the provided in the datasheet (0.5376 lux/cnt for the veml6030). The resulting value must still be multiplied by 100 to make it micro. This bug was introduced with the original implementation of the driver. Only the illuminance channel is fixed becuase the scale is non sensical for the intensity channels anyway. Cc: stable@vger.kernel.org Fixes: 7b779f573c48 ("iio: light: add driver for veml6030 ambient light sensor") Signed-off-by: Javier Carrasco Link: https://patch.msgid.link/20241016-veml6030-fix-processed-micro-v1-1-4a5644796437@gmail.com Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman