kernel/linux.git/drivers/iio/light/Makefile, branch v6.7

iio: light: ROHM BU27008 color sensor

2023-05-23T20:20:17+00:00

The ROHM BU27008 is a sensor with 5 photodiodes (red, green, blue, clear and IR) with four configurable channels. Red and green being always available and two out of the rest three (blue, clear, IR) can be selected to be simultaneously measured. Typical application is adjusting LCD backlight of TVs, mobile phones and tablet PCs. Add initial support for the ROHM BU27008 color sensor. - raw_read() of RGB and clear channels - triggered buffer w/ DRDY interrtupt Signed-off-by: Matti Vaittinen Link: https://lore.kernel.org/r/2594162f0e44148cffb1fb05f1d6edfde6bd11bc.1683541225.git.mazziesaccount@gmail.com Signed-off-by: Jonathan Cameron

iio: light: Add support for TI OPT4001 light sensor

2023-05-13T16:56:06+00:00

This driver uses the continuous mode of the chip and integration time can be configured through sysfs. The constants for calculating lux value differs between packaging so it uses different compatible string for the two versions "ti,opt4001-picostar" and "ti,opt4001-sot-5x3" since the device id is the same. Datasheet: https://www.ti.com/lit/gpn/opt4001 Signed-off-by: Stefan Windfeldt-Prytz Link: https://lore.kernel.org/r/20230323-add-opt4001-driver-v3-2-62e121dab294@axis.com Signed-off-by: Jonathan Cameron

iio: light: ROHM BU27034 Ambient Light Sensor

2023-04-10T11:26:35+00:00

ROHM BU27034 is an ambient light sensor with 3 channels and 3 photo diodes capable of detecting a very wide range of illuminance. Typical application is adjusting LCD and backlight power of TVs and mobile phones. Add initial support for the ROHM BU27034 ambient light sensor. NOTE: - Driver exposes 4 channels. One IIO_LIGHT channel providing the calculated lux values based on measured data from diodes #0 and #1. In addition, 3 IIO_INTENSITY channels are emitting the raw register data from all diodes for more intense user-space computations. - Sensor has GAIN values that can be adjusted from 1x to 4096x. - Sensor has adjustible measurement times of 5, 55, 100, 200 and 400 mS. Driver does not support 5 mS which has special limitations. - Driver exposes standard 'scale' adjustment which is implemented by: 1) Trying to adjust only the GAIN 2) If GAIN adjustment alone can't provide requested scale, adjusting both the time and the gain is attempted. - Driver exposes writable INT_TIME property that can be used for adjusting the measurement time. Time adjustment will also cause the driver to try to adjust the GAIN so that the overall scale is kept as close to the original as possible. Signed-off-by: Matti Vaittinen Link: https://lore.kernel.org/r/2a7efb6f335da5526fbe34b95137c5e45db5c5d3.1680263956.git.mazziesaccount@gmail.com Signed-off-by: Jonathan Cameron

iio: light: tsl2563: Keep Makefile sorted by module name

2022-12-28T17:19:46+00:00

The Makefile is sorted by a module name, keep it that way. Signed-off-by: Andy Shevchenko Tested-by: Ferry Toth Link: https://lore.kernel.org/r/20221207190348.9347-11-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron

iio: light: Add support for ltrf216a sensor

2022-08-15T21:29:57+00:00

Add initial support for ltrf216a ambient light sensor. Datasheet: https://gitlab.collabora.com/shreeya/iio/-/blob/master/LTRF216A.pdf Reviewed-by: Andy Shevchenko Co-developed-by: Zhigang Shi Signed-off-by: Zhigang Shi Co-developed-by: Dmitry Osipenko Signed-off-by: Dmitry Osipenko Signed-off-by: Shreeya Patel Link: https://lore.kernel.org/r/20220725104050.491396-3-shreeya.patel@collabora.com Signed-off-by: Jonathan Cameron

iio: light: Added AMS tsl2591 driver implementation

2021-05-17T12:49:06+00:00

Driver implementation for AMS/TAOS tsl2591 ambient light sensor. This driver supports configuration via device tree and sysfs. Supported channels for raw infrared light intensity, raw combined light intensity and illuminance in lux. The driver additionally supports iio events on lower and upper thresholds. This is a very-high sensitivity light-to-digital converter that transforms light intensity into a digital signal. Datasheet: https://ams.com/tsl25911#tab/documents Signed-off-by: Joe Sandom Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20210421221330.17007-1-joe.g.sandom@gmail.com Signed-off-by: Jonathan Cameron

iio: light: as73211: New driver

2020-09-03T18:40:40+00:00

Support for AMS AS73211 JENCOLOR(R) Digital XYZ Sensor. This driver has no built-in trigger. In order for making triggered measurements, an external (software) trigger driver like iio-trig-hrtimer or iio-trig-sysfs is required. The sensor supports single and continuous measurement modes. The latter is not used by design as this would require tight timing synchronization between hardware and driver without much benefit. Datasheet: https://ams.com/documents/20143/36005/AS73211_DS000556_3-01.pdf Signed-off-by: Christian Eggers Reviewed-by: Andy Shevchenko Signed-off-by: Jonathan Cameron

Merge tag 'mfd-next-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

2020-04-08T02:48:52+00:00

Pull mfd updates from Lee Jones: "New Drivers: - Add support for IQS620A/621/622/624/625 Azoteq IQS62X Sensors New Device Support: - Add support for ADC, IRQ, Regulator, RTC and WDT to Ricoh RN5T618 PMIC - Add support for Comet Lake to Intel LPSS New Functionality: - Add support for Charger Detection to Spreadtrum SC27xx PMICs - Add support for Interrupt Polarity to Dialog Semi DA9062/61 PMIC - Add ACPI enumeration support to Diolan DLN2 USB Adaptor Fix-ups: - Device Tree; iqs62x, rn5t618, cros_ec_dev, stm32-lptimer, rohm,bd71837, rohm,bd71847 - I2C registration; rn5t618 - Kconfig; MFD_CPCAP, AB8500_CORE, MFD_WM8994, MFD_WM97xx, MFD_STPMIC1 - Use flexible-array members; omap-usb-tll, qcom-pm8xxx - Remove unnecessary casts; omap-usb-host, omap-usb-tll - Power (suspend/resume/poweroff) enhancements; rk808 - Improve error/sanity checking; dln2 - Use snprintf(); aat2870-core Bug Fixes: - Fix PCI IDs in intel-lpss-pci" * tag 'mfd-next-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (33 commits) mfd: intel-lpss: Fix Intel Elkhart Lake LPSS I2C input clock mfd: aat2870: Use scnprintf() for avoiding potential buffer overflow mfd: dln2: Allow to be enumerated via ACPI mfd: da9062: Add support for interrupt polarity defined in device tree dt-bindings: bd718x7: Yamlify and add BD71850 mfd: dln2: Fix sanity checking for endpoints mfd: intel-lpss: Add Intel Comet Lake PCH-V PCI IDs mfd: sc27xx: Add USB charger type detection support dt-bindings: mfd: Document STM32 low power timer bindings mfd: rk808: Convert RK805 to shutdown/suspend hooks mfd: rk808: Reduce shutdown duplication mfd: rk808: Stop using syscore ops mfd: rk808: Ensure suspend/resume hooks always work mfd: rk808: Always use poweroff when requested mfd: omap: Remove useless cast for driver.name mfd: Kconfig: Fix some misspelling of the word functionality mfd: pm8xxx: Replace zero-length array with flexible-array member mfd: omap-usb-tll: Replace zero-length array with flexible-array member mfd: cpcap: Fix compile if MFD_CORE is not selected mfd: cros_ec: Check DT node for usbpd-notify add ...

iio: light: Add support for Azoteq IQS621/622 ambient light sensors

2020-03-27T08:25:56+00:00

This patch adds support for the Azoteq IQS621 and IQS622 ambient light sensors, both of which can report a four-bit representation of ambient light intensity. The IQS621 can additionally report illuminace directly in units of lux, while the IQS622 can report a four-bit representation of infrared light intensity. Furthermore, the IQS622 can report a unitless measurement of a target's proximity to the device. Signed-off-by: Jeff LaBundy Reviewed-by: Jonathan Cameron Signed-off-by: Lee Jones

iio: light: add Dyna-Image AL3010 driver

2020-03-08T17:28:34+00:00

Based on: - 3320A in-kernel driver - https://www.spinics.net/lists/linux-iio/msg25145.html - https://lore.kernel.org/patchwork/patch/684179/ I decided to keep it aside of AL3320A due to different approach and much simpler design of 3010. Tested on Nexus 7 2012 (grouper/tilapia). Tested-by: David Heidelberg Tested-by: Dmitry Osipenko Tested-by: Michał Mirosław Reviewed-by: Dmitry Osipenko Signed-off-by: David Heidelberg Signed-off-by: Jonathan Cameron