kernel/linux.git/drivers/iio/light/Makefile, branch linux-4.4.y

iio: light: Add support for UPISEMI uS5182d als and proximity sensor

2015-09-23T19:23:27+00:00

Add support for UPISEMI us5182d als and proximity sensor. Supports raw readings. Data sheet for this device can be found here: http://www.upi-semi.com/temp/uS5182D-DS-P0103-temp.pdf Signed-off-by: Adriana Reus Signed-off-by: Jonathan Cameron

iio: light: add APDS9960 ALS + promixity driver

2015-08-31T15:23:09+00:00

APDS9960 is a combination of ALS, proximity, and gesture sensors. This patch adds support for these functions along with gain control, integration time, and event thresholds. Signed-off-by: Matt Ranostay Signed-off-by: Jonathan Cameron

iio: light: Add support for TXC PA12 als and proximity sensor

2015-07-20T17:41:21+00:00

Add support for TXC PA12203001 als and proximity sensor. Support for raw illuminance and proximity readings. Signed-off-by: Adriana Reus Signed-off-by: Jonathan Cameron

iio: light: add support for TI's opt3001 light sensor

2015-07-20T17:41:21+00:00

TI's opt3001 light sensor is a simple and yet powerful little device. The device provides 99% IR rejection, automatic full-scale, very low power consumption and measurements from 0.01 to 83k lux. This patch adds support for that device using the IIO framework. See http://www.ti.com/product/opt3001 for more information. Signed-off-by: Felipe Balbi Signed-off-by: Andreas Dannenberg Signed-off-by: Jonathan Cameron

iio: light: Add support for ROHM RPR0521 sensor

2015-06-21T14:14:54+00:00

This patch adds support for ROHM RPR0521 ambient light and proximity sensor. It offers raw readings for intensity and proximity. Signed-off-by: Daniel Baluta Signed-off-by: Jonathan Cameron

iio: acpi: Add support for ACPI0008 Ambient Light Sensor

2015-05-10T19:31:48+00:00

This driver adds the initial support for the ACPI Ambient Light Sensor as defined in Section 9.2 of the ACPI specification (Revision 5.0) [1]. Sensors complying with the standard are exposed as ACPI devices with ACPI0008 as hardware ID and provide standard methods by which the OS can query properties of the ambient light environment the system is currently operating in. This driver currently allows only to get the current ambient light illuminance reading through the _ALI method, but is ready to be extended extended to handle _ALC, _ALT and _ALP as well. [1] http://www.acpi.info/DOWNLOADS/ACPIspec50.pdf Signed-off-by: Martin Liska Signed-off-by: Marek Vasut Signed-off-by: Gabriele Mazzotta Cc: Zhang Rui Signed-off-by: Jonathan Cameron

iio: light: add support for ROHM BH1710/BH1715/BH1721/BH1750/BH1751 ambient light sensors

2015-05-10T19:31:46+00:00

Add support for ROHM BH1710/BH1715/BH1721/BH1750/BH1751 ambient light sensors. Signed-off-by: Tomasz Duszynski Signed-off-by: Jonathan Cameron

iio: light: Add support for Sensortek STK3310

2015-05-10T19:31:42+00:00

Minimal implementation of an IIO driver for the Sensortek STK3310 ambient light and proximity sensor. The STK3311 model is also supported. Includes: - ACPI support; - read_raw and write_raw; - reading and setting configuration parameters for gain/scale and integration time for both ALS and PS. - power management Signed-off-by: Tiberiu Breana Signed-off-by: Jonathan Cameron

iio: light: Add support for Capella CM3323 color sensor

2015-03-15T11:43:02+00:00

Minimal implementation providing raw light intensity and integration time attribute. Userspace applications can use GREEN channel for raw illuminance readings following this table: Integration Time | G Sensitivity ================================ 40 ms | 0.18 80 ms | 0.09 160 ms | 0.045 320 ms | 0.0225 640 ms | 0.01125 1280 ms | 0.005625 Signed-off-by: Daniel Baluta Signed-off-by: Jonathan Cameron

iio: Added Capella cm3232 ambient light sensor driver.

2015-01-27T18:49:48+00:00

CM3232 is an advanced ambient light sensor with I2C protocol interface. The I2C slave address is internally hardwired as 0x10 (7-bit). Writing to configure register is byte mode, but reading ALS register requests to use word mode for 16-bit resolution. Signed-off-by: Kevin Tsai Signed-off-by: Jonathan Cameron