kernel/linux.git/drivers/iio/humidity, branch v6.12.80

iio: humditiy: hdc3020: fix units for thresholds and hysteresis

2025-12-06T21:24:58+00:00

commit cb372b4f46d4285e5d2c07ba734374151b8e34e7 upstream. According to the ABI the units after application of scale and offset are milli degree celsius for temperature thresholds and milli percent for relative humidity thresholds. Currently the resulting units are degree celsius for temperature thresholds and hysteresis and percent for relative humidity thresholds and hysteresis. Change scale factor to fix this issue. Fixes: 3ad0e7e5f0cb ("iio: humidity: hdc3020: add threshold events support") Reported-by: Chris Lesiak Reviewed-by: Javier Carrasco Signed-off-by: Dimitri Fedrau Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: humditiy: hdc3020: fix units for temperature and humidity measurement

2025-12-06T21:24:57+00:00

commit 7b8dc11c0a830caa0d890c603d597161c6c26095 upstream. According to the ABI the units after application of scale and offset are milli degrees for temperature measurements and milli percent for relative humidity measurements. Currently the resulting units are degree celsius for temperature measurements and percent for relative humidity measurements. Change scale factor to fix this issue. Fixes: c9180b8e39be ("iio: humidity: Add driver for ti HDC302x humidity sensors") Reported-by: Chris Lesiak Suggested-by: Chris Lesiak Reviewed-by: Javier Carrasco Signed-off-by: Dimitri Fedrau Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

move asm/unaligned.h to linux/unaligned.h

2024-10-02T21:23:23+00:00

asm/unaligned.h is always an include of asm-generic/unaligned.h; might as well move that thing to linux/unaligned.h and include that - there's nothing arch-specific in that header. auto-generated by the following: for i in `git grep -l -w asm/unaligned.h`; do sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i done for i in `git grep -l -w asm-generic/unaligned.h`; do sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i done git mv include/asm-generic/unaligned.h include/linux/unaligned.h git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h

iio: humidity: Add support for ENS210

2024-08-17T14:37:37+00:00

Add support for ENS210/ENS210A/ENS211/ENS212/ENS213A/ENS215. The ENS21x is a family of temperature and relative humidity sensors with accuracies tailored to the needs of specific applications. Signed-off-by: Joshua Felmeden Link: https://patch.msgid.link/20240805-ens21x-v6-2-5bb576ef26a6@thegoodpenguin.co.uk Signed-off-by: Jonathan Cameron

iio: humidity: am2315: make use of iio_for_each_active_channel()

2024-08-03T09:13:40+00:00

Use iio_for_each_active_channel() to iterate over active channels accessing '.masklength' so it can be annotated as __private when there are no more direct users of it. Signed-off-by: Nuno Sa Link: https://patch.msgid.link/20240718-dev-iio-masklength-private2-v1-8-8e12cd042906@analog.com Signed-off-by: Jonathan Cameron

Merge 6.10-rc6 into char-misc-next

2024-07-01T11:55:39+00:00

We need the char/misc/iio fixes in here as well to build on top of. Signed-off-by: Greg Kroah-Hartman

iio: humidity: si7020: add heater support

2024-06-13T18:19:23+00:00

This patch adds support for the integrated on-chip heater that is present on all the devices supported by this driver (si7020, si7021, si7013, th6). In order to configure the heater, the driver interacts with the following device registers: * User Register - the 2nd bit of this register is a "Heater Enable bit" (0 means that the heater is off, 1 means that it's on). * Heater Register - this register is present only on the si70xx devices and controls the current flowing through the heater. The 4 lower bits of this register can be assigned values from 0x0 to 0xF. Signed-off-by: Antoni Pokusinski Link: https://lore.kernel.org/r/20240607141029.51744-1-apokusinski@o2.pl Signed-off-by: Jonathan Cameron

iio: humidity: hdc3020: fix hysteresis representation

2024-06-09T10:05:03+00:00

According to the ABI docs hysteresis values are represented as offsets to threshold values. Current implementation represents hysteresis values as absolute values which is wrong. Nevertheless the device stores them as absolute values and the datasheet refers to them as clear thresholds. Fix the reading and writing of hysteresis values by including thresholds into calculations. Hysteresis values that result in threshold clear values that are out of limits will be truncated. To check that the threshold clear values are correct, registers are read out using i2ctransfer and the corresponding temperature and relative humidity thresholds are calculated using the formulas in the datasheet. Fixes: 3ad0e7e5f0cb ("iio: humidity: hdc3020: add threshold events support") Signed-off-by: Dimitri Fedrau Reviewed-by: Javier Carrasco Link: https://lore.kernel.org/r/20240605192136.38146-1-dima.fedrau@gmail.com Cc: Signed-off-by: Jonathan Cameron

iio: Drop explicit initialization of struct i2c_device_id::driver_data to 0

2024-05-27T08:48:57+00:00

These drivers don't use the driver_data member of struct i2c_device_id, so don't explicitly initialize this member. This prepares putting driver_data in an anonymous union which requires either no initialization or named designators. But it's also a nice cleanup on its own. While add it, also remove commas after the sentinel entries. Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20240508072928.2135858-2-u.kleine-koenig@pengutronix.de Signed-off-by: Jonathan Cameron

iio: humidity: hdc3020: add reset management

2024-03-25T20:10:13+00:00

The HDC3020 provides an active low reset signal that must be handled if connected. Asserting this signal turns the device into Trigger-on Demand measurement mode, reducing its power consumption when no measurements are required like in low-power modes. According to the datasheet, the longest "Reset Ready" is 3 ms, which is only taken into account if the reset signal is defined. Signed-off-by: Javier Carrasco Link: https://lore.kernel.org/r/20240303-hdc3020-pm-v3-3-48bc02b5241b@gmail.com Signed-off-by: Jonathan Cameron