kernel/linux.git/drivers/iio/frequency, branch v6.6.132

iio: frequency: adf4377: Fix duplicated soft reset mask

2026-03-25T10:05:55+00:00

commit 6c8bf4b604a8a6346ca71f1c027fa01c2c2e04cb upstream. The regmap_read_poll_timeout() uses ADF4377_0000_SOFT_RESET_R_MSK twice instead of checking both SOFT_RESET_MSK (bit 0) and SOFT_RESET_R_MSK (bit 7). This causes an incomplete reset status check. The code first sets both SOFT_RESET and SOFT_RESET_R bits to 1 via regmap_update_bits(), then polls for them to be cleared. Since we set both bits before polling, we should be waiting for both to clear. Fix by using both masks as done in regmap_update_bits() above. Fixes: eda549e2e524 ("iio: frequency: adf4377: add support for ADF4377") Signed-off-by: SeungJu Cheon Cc: Stable@vger.kernel.org Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: frequency: adf4350: Fix prescaler usage.

2025-10-19T14:30:49+00:00

commit 33d7ecbf69aa7dd4145e3b77962bcb8759eede3d upstream. The ADF4350/1 features a programmable dual-modulus prescaler of 4/5 or 8/9. When set to 4/5, the maximum RF frequency allowed is 3 GHz. Therefore, when operating the ADF4351 above 3 GHz, this must be set to 8/9. In this context not the RF output frequency is meant - it's the VCO frequency. Therefore move the prescaler selection after we derived the VCO frequency from the desired RF output frequency. This BUG may have caused PLL lock instabilities when operating the VCO at the very high range close to 4.4 GHz. Fixes: e31166f0fd48 ("iio: frequency: New driver for Analog Devices ADF4350/ADF4351 Wideband Synthesizers") Signed-off-by: Michael Hennerich Signed-off-by: Nuno Sá Reviewed-by: Andy Shevchenko Link: https://patch.msgid.link/20250829-adf4350-fix-v2-1-0bf543ba797d@analog.com Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: frequency: admv4420: fix missing select REMAP_SPI in Kconfig

2024-11-01T00:58:20+00:00

[ Upstream commit 6b8e9dbfaed471627f7b863633b9937717df1d4d ] This driver makes use of regmap_spi, but does not select the required module. Add the missing 'select REGMAP_SPI'. Fixes: b59c04155901 ("iio: frequency: admv4420.c: Add support for ADMV4420") Signed-off-by: Javier Carrasco Link: https://patch.msgid.link/20241007-ad2s1210-select-v2-2-7345d228040f@gmail.com Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin

iio: frequency: {admv4420,adrf6780}: format Kconfig entries

2024-11-01T00:58:20+00:00

[ Upstream commit 5c9644a683e1690387a476a4f5f6bd5cf9a1d695 ] Format the entries of these drivers in the Kconfig, where spaces instead of tabs were used. Signed-off-by: Javier Carrasco Link: https://patch.msgid.link/20241007-ad2s1210-select-v2-1-7345d228040f@gmail.com Signed-off-by: Jonathan Cameron Stable-dep-of: 6b8e9dbfaed4 ("iio: frequency: admv4420: fix missing select REMAP_SPI in Kconfig") Signed-off-by: Sasha Levin

iio: frequency: adf4377: add missing select REMAP_SPI in Kconfig

2024-10-22T13:46:30+00:00

commit c64643ed4eaa5dfd0b3bab7ef1c50b84f3dbaba4 upstream. This driver makes use of regmap_spi, but does not select the required module. Add the missing 'select REGMAP_SPI'. Fixes: eda549e2e524 ("iio: frequency: adf4377: add support for ADF4377") Signed-off-by: Javier Carrasco Link: https://patch.msgid.link/20241003-ad2s1210-select-v1-3-4019453f8c33@gmail.com Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: frequency: adrf6780: rm clk provider include

2024-08-03T06:53:56+00:00

[ Upstream commit e2261b4a4de2804698935eb44f98dc897e1c44c3 ] The driver has no clock provider implementation, therefore remove the include. Fixes: 63aaf6d06d87 ("iio: frequency: adrf6780: add support for ADRF6780") Signed-off-by: Antoniu Miclaus Link: https://lore.kernel.org/r/20240530092835.36892-1-antoniu.miclaus@analog.com Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin

iio: frequency: adf4350: Use device managed functions and fix power down issue.

2023-11-20T10:59:24+00:00

[ Upstream commit 9979cc64853b598518a485c2e554657d5c7a00c8 ] The devm_clk_get_enabled() helper: - calls devm_clk_get() - calls clk_prepare_enable() and registers what is needed in order to call clk_disable_unprepare() when needed, as a managed resource. Also replace devm_regulator_get() and regulator_enable() with devm_regulator_get_enable() helper and remove regulator_disable(). Replace iio_device_register() with devm_iio_device_register() and remove iio_device_unregister(). And st->reg is not used anymore, so remove it. As Jonathan pointed out, couple of things that are wrong: 1) The device is powered down 'before' we unregister it with the subsystem and as such userspace interfaces are still exposed which probably won't do the right thing if the chip is powered down. 2) This isn't done in the error paths in probe. To solve this problem, register a new callback adf4350_power_down() with devm_add_action_or_reset(), to enable software power down in both error and device detach path. So the remove function can be removed. Remove spi_set_drvdata() from the probe function, since spi_get_drvdata() is not used anymore. Fixes: e31166f0fd48 ("iio: frequency: New driver for Analog Devices ADF4350/ADF4351 Wideband Synthesizers") Signed-off-by: Jinjie Ruan Link: https://lore.kernel.org/r/20230828062717.2310219-1-ruanjinjie@huawei.com Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin

iio: admv1013: add mixer_vgate corner cases

2023-09-11T19:12:59+00:00

Include the corner cases in the computation of the MIXER_VGATE register value. According to the datasheet: The MIXER_VGATE values follows the VCM such as, that for a 0V to 1.8V VCM, MIXER_VGATE = 23.89 VCM + 81, and for a > 1.8V to 2.6V VCM, MIXER_VGATE = 23.75 VCM + 1.25. Fixes: da35a7b526d9 ("iio: frequency: admv1013: add support for ADMV1013") Signed-off-by: Antoniu Miclaus Reviewed-by: Nuno Sa Link: https://lore.kernel.org/r/20230807143806.6954-1-antoniu.miclaus@analog.com Cc: Signed-off-by: Jonathan Cameron

Merge 6.5-rc6 into char-misc-next

2023-08-13T20:14:51+00:00

We need the char/misc fixes in here as well to build on top of. Signed-off-by: Greg Kroah-Hartman

drivers: iio: admv1013: add vcc regulators

2023-08-05T18:29:39+00:00

Add regulators for the VCC supplies of the admv1013. The patch aims to align the implementation with the current admv1014 driver where all the VCC supplies are handled as regulators. Signed-off-by: Antoniu Miclaus Link: https://lore.kernel.org/r/20230731094455.26742-2-antoniu.miclaus@analog.com Signed-off-by: Jonathan Cameron