kernel/linux.git/drivers/iio/frequency, branch v5.15.7

iio: frequency: adf4350: disable reg and clk on error in adf4350_probe()

2021-06-13T16:00:17+00:00

Disable reg and clk when devm_gpiod_get_optional() fails in adf4350_probe(). Fixes:4a89d2f47ccd ("iio: adf4350: Convert to use GPIO descriptor") Reported-by: Hulk Robot Signed-off-by: Yang Yingliang Reviewed-by: Linus Walleij Link: https://lore.kernel.org/r/20210601142605.3613605-1-yangyingliang@huawei.com Cc: Signed-off-by: Jonathan Cameron

iio: frequency: adf4350: Remove redundant null check before clk_disable_unprepare

2021-01-09T21:52:46+00:00

Because clk_disable_unprepare() already checked NULL clock parameter, so the additional check is unnecessary, just remove it. Signed-off-by: Xu Wang Link: https://lore.kernel.org/r/20201218094647.1386-1-vulab@iscas.ac.cn Signed-off-by: Jonathan Cameron

iio: frequency: adf4350: Replace indio_dev->mlock with own device lock

2020-09-16T17:58:01+00:00

As part of the general cleanup of indio_dev->mlock, this change replaces it with a local lock. The lock protect the state of the device from potential concurrent writes. The device is configured via a sequence of SPI writes, and this lock is meant to prevent the start of another sequence before another one has finished. This is part of a bigger cleanup. Link: https://lore.kernel.org/linux-iio/CA+U=Dsoo6YABe5ODLp+eFNPGFDjk5ZeQEceGkqjxXcVEhLWubw@mail.gmail.com/ Signed-off-by: Sergiu Cuciurean Signed-off-by: Alexandru Ardelean Link: https://lore.kernel.org/r/20200916092731.77220-1-alexandru.ardelean@analog.com Signed-off-by: Jonathan Cameron

iio: frequency: ad9523: convert rest of driver to device managed functions

2020-08-22T09:53:14+00:00

The driver pretty much uses device managed functions. The only left-over is the iio_device_register() function, which also requires an action-or-reset hook to disable the regulator on the remove and error path. Signed-off-by: Alexandru Ardelean Signed-off-by: Jonathan Cameron

iio: remove explicit IIO device parent assignment

2020-06-14T10:49:59+00:00

This patch applies the semantic patch: @@ expression I, P, SP; @@ I = devm_iio_device_alloc(P, SP); ... - I->dev.parent = P; It updates 302 files and does 307 deletions. This semantic patch also removes some comments like '/* Establish that the iio_dev is a child of the i2c device */' But this is is only done in case where the block is left empty. The patch does not seem to cover all cases. It looks like in some cases a different variable is used in some cases to assign the parent, but it points to the same reference. In other cases, the block covered by ... may be just too big to be covered by the semantic patch. However, this looks pretty good as well, as it does cover a big bulk of the drivers that should remove the parent assignment. Signed-off-by: Alexandru Ardelean Signed-off-by: Jonathan Cameron

iio: adf4350: Convert to use GPIO descriptor

2019-12-15T11:42:16+00:00

The lock detect GPIO line is better to grab using a GPIO descriptor. We drop the pdata for this: clients using board files can use machine descriptor tables to pass this GPIO from static data. Cc: Michael Hennerich Signed-off-by: Linus Walleij Reviewed-by: Alexandru Ardelean Signed-off-by: Jonathan Cameron

iio: frequency: adf4371: Fix output frequency setting

2019-08-05T16:38:33+00:00

The fract1 word was not being properly programmed on the device leading to wrong output frequencies. Fixes: 7f699bd14913 (iio: frequency: adf4371: Add support for ADF4371 PLL) Signed-off-by: Nuno Sá Reviewed-by: Stefan Popa Cc: Signed-off-by: Jonathan Cameron

Merge tag 'iio-for-5.3b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

2019-07-01T08:58:13+00:00

Jonathan writes: Second set of IIO device support, features, cleanups and minor fixes for 5.3. A few bits for the counters subsystem mixed in here as well. There are some late breaking fixes as well, which aren't so urgent they can't wait for the merge window. New Device Support * adf4371 - New driver + bindings. - Support the adf4372 PLL. Mostly ID and bindings. * ad8366 (note includes rework of driver needed to allow support for these). - Support the ADL5240 variable gain amplifier (VGA). - Support the ADA4961 digital gain amplifier (DGA). * dps310 - New driver, in several parts from different authors for this temp and pressure sensor. - Includes errata workaround for a temperature reading issue. * stk3310 - Support the stk3335, mostly ID. Features and cleanups * core - drop error handling on debugfs registration. - harden by making sure we don't overrun iio_chan_info_postfix. * docs - convert remaining docs to rst. At somepoint we'll fit these few into the main IIO docs. - improve sampling_frequency_available docs but explaining the range form. * ad_sigma_delta - Drop a pointless goto. * ad2s1210 - Drop pointless platform data null check seeing as we don't actually use platform data anymore. * ad7124 - Relax limitation on channel numbers to allow pseudo different channels. - Support control of whether the input is buffered via DT. - Use dynamic allocation for channel configuration to make it easier to support new devices. - YAML binding conversion. * ad7150 - Comment tidy up. - Consistent and simple if (ret) handling of i2c errors. - FIELD_GET and GENMASK. - Ternary rather than !!(condition) for readability. - Use macros to avoid repetition of channel definitions. * ad7606 - Add software channel config (rather that pin controlled) - Refactor to simplify addition of new part in future. * ad7746 - of_deivce_id table. * ad7780 - MAINTAINERS entry - YAML DT bindings. * ad8366 - Stop using core mlock in favour of well scoped local lock. - SPDX + copyright date update. * ad9834 - of_device_id table * adf4371 - Add support for output stage muting before lock on has occured. * adis library - MAINTAINERS entry to reflect that this now Alexandru's problem ;) * adis162xx: - Fix a slightly incorrect set of comments and print statements on minimum supported voltage. * adis16203 - of_device_id table. * adis16240 - Add of_device_id table (in two parts as first patch only used it for MODULE_DEVICE_TABLE.) * adt7316-spi - of_device_id table * adxl372 - YAML DT binding conversion. - Cleanup use of buffer callback functions (precursor to core rework). * bh1710 - Simplify getting the i2c adapter from the client. * dht11 - Mote to newer GPIO consumer interface. * kxcjk-1013.c - Add binding for sensor in display of some ultrabooks after userspace tools updated for it not be a problem to report two similar sensors. * imx7d - drop unused variables. - white space - define instead of variable for clock frequency that is fixed. - drop pointless error message. * messon_saradc - SPDX * sps30 - MAINTAINERS entry - YAML binding conversion. * st_accel - Tidy up ordering in various buffer related callbacks. This is part of a long running effort to simplify the core code. * stm32-dfsdm: - Manage the resolution cleanly in triggerd modes. - Add fast mode support which allows more flexible filter choices. - Add a comment on the reason for a 16 bit record when technically not 'required'. * st_lsm6dsx - Embed device name in the sensor_settings struct as i3c doesn't have a convenient name field to use for this. * xilinx-adc - Relax constraints on supported platforms to reflect that this can used with FPGAs on PCIe cards and hence many architectures. * counters/ftm-quaddec - Fix some formatting io MODULE_AUTHOR - MAINTAINERS entry Fixes * tools - fix incorrect handling of 32 bit channels. * sca3000 - Potential endian bug that is unlikely to bite anyone (be64 host seems unlikely for this old part). * stm32-adc - Add vdda-supply. On some boards it needs to be turned on to supply the ADC. DT bindings included. * stm32-dfsdm - Fix output resolution to work with filter orders other than 3. - Fix output datatype as it's signed and previously claimed not to be. * tag 'iio-for-5.3b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (68 commits) iio: iio-utils: Fix possible incorrect mask calculation iio: frequency: adf4371: Add support for output stage mute dt-bindings: iio: frequency: Add ADF4372 PLL documentation iio: frequency: adf4371: Add support for ADF4372 PLL dt-bindings: iio: adc: Add buffered input property Convert AD7124 bindings documentation to YAML format. iio: adc: ad7124: Shift to dynamic allocation for channel configuration iio: adc: ad7124: Add buffered input support iio: adc: ad7124: Remove input number limitation MAINTAINERS: add ADIS IMU driver library entry iio: adis162xx: fix low-power docs & reports counter/ftm-quaddec: Add missing '>' in MODULE_AUTHOR iio: core: no need to check return value of debugfs_create functions docs: iio: convert to ReST iio: adc: stm32-adc: add missing vdda-supply dt-bindings: iio: adc: stm32: add missing vdda supply iio: adc: stm32-dfsdm: add comment for 16 bits record iio: adc: stm32-dfsdm: add fast mode support iio: adc: stm32-dfsdm: manage data resolution in trigger mode iio: adc: stm32-dfsdm: fix data type ...

iio: frequency: adf4371: Add support for output stage mute

2019-06-26T20:24:21+00:00

Another feature of the ADF4371/ADF4372 is that the supply current to the RF8P and RF8N output stage can shut down until the ADF4371 achieves lock as measured by the digital lock detect circuitry. The mute to lock detect bit (MUTE_LD) in REG25 enables this function. Signed-off-by: Stefan Popa Signed-off-by: Jonathan Cameron

iio: frequency: adf4371: Add support for ADF4372 PLL

2019-06-26T20:24:21+00:00

The ADF4372 is part of the same family with ADF4371, the main difference is that it has only 3 channels instead of 4, as the frequency quadrupler is missing. As a result, the ADF4372 allows frequencies from 62.5 MHz to 16 GHz to be generated. Datasheet: Link: https://www.analog.com/media/en/technical-documentation/data-sheets/adf4372.pdf Signed-off-by: Stefan Popa Signed-off-by: Jonathan Cameron