kernel/linux.git/drivers/iio/frequency, branch v4.19.16

Merge branch 'fixes-togreg' into togreg

2018-08-01T17:56:17+00:00

iio: ad9523: support for external signals via gpios

2018-07-28T09:41:14+00:00

The AD9523 supports external signals for power-down mode, resetting the device and sync timing. This change add support for specifying values for these signals via the gpios and initializing them default values. For the reset signal, the GPIO is toggled during probing to re-initialize the device to a known state. Signed-off-by: Michael Hennerich Signed-off-by: Lars-Peter Clausen Signed-off-by: Alexandru Ardelean Signed-off-by: Jonathan Cameron

iio: ad9523: Fix return value for ad952x_store()

2018-07-28T09:35:34+00:00

A sysfs write callback function needs to either return the number of consumed characters or an error. The ad952x_store() function currently returns 0 if the input value was "0", this will signal that no characters have been consumed and the function will be called repeatedly in a loop indefinitely. Fix this by returning number of supplied characters to indicate that the whole input string has been consumed. Signed-off-by: Lars-Peter Clausen Signed-off-by: Alexandru Ardelean Fixes: cd1678f96329 ("iio: frequency: New driver for AD9523 SPI Low Jitter Clock Generator") Cc: Signed-off-by: Jonathan Cameron

iio: ad9523: Fix displayed phase

2018-07-24T17:17:08+00:00

Fix the displayed phase for the ad9523 driver. Currently the most significant decimal place is dropped and all other digits are shifted one to the left. This is due to a multiplication by 10, which is not necessary, so remove it. Signed-off-by: Lars-Peter Clausen Signed-off-by: Alexandru Ardelean Fixes: cd1678f9632 ("iio: frequency: New driver for AD9523 SPI Low Jitter Clock Generator") Cc: Signed-off-by: Jonathan Cameron

iio: ad9523: replace core mlock with local lock

2018-07-23T18:18:11+00:00

This is also part of a long term effort to make the use of mlock opaque and single purpose. This lock is required for accessing device registers. The device may be accessed by multiple processes at the same time, and this can result in inconsistent data, where one device reads data before the other one has finished writing. Signed-off-by: Lars-Peter Clausen Signed-off-by: Alexandru Ardelean Signed-off-by: Jonathan Cameron

iio:frequency: drop assign iio_info.driver_module

2017-08-22T20:28:20+00:00

The equivalent is now done via macro magic when the relevant register call is made. The actual structure element will shortly go away. Signed-off-by: Jonathan Cameron Reviewed-by: Lars-Peter Clausen

iio: frequency: ad9523: use unsigned int rather then bare unsigned

2016-04-17T09:31:03+00:00

This fix checkpatch warnings: WARNING: Prefer 'unsigned int' to bare use of 'unsigned' Signed-off-by: Slawomir Stepien Signed-off-by: Jonathan Cameron

Merge tag 'spi-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

2015-11-05T21:15:12+00:00

Pull spi updates from Mark Brown: "Quite a lot of activity in SPI this cycle, almost all of it in drivers with a few minor improvements and tweaks in the core. - Updates to pxa2xx to support Intel Broxton and multiple chip selects. - Support for big endian in the bcm63xx driver. - Multiple slave support for the mt8173 - New driver for the auxiliary SPI controller in bcm2835 SoCs. - Support for Layerscale SoCs in the Freescale DSPI driver" * tag 'spi-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (87 commits) spi: pxa2xx: Rework self-initiated platform data creation for non-ACPI spi: pxa2xx: Add support for Intel Broxton spi: pxa2xx: Detect number of enabled Intel LPSS SPI chip select signals spi: pxa2xx: Add output control for multiple Intel LPSS chip selects spi: pxa2xx: Use LPSS prefix for defines that are Intel LPSS specific spi: Add DSPI support for layerscape family spi: ti-qspi: improve ->remove() callback spi/spi-xilinx: Fix race condition on last word read spi: Drop owner assignment from spi_drivers spi: Add THIS_MODULE to spi_driver in SPI core spi: Setup the master controller driver before setting the chipselect spi: dw: replace magic constant by DW_SPI_DR spi: mediatek: mt8173 spi multiple devices support spi: mediatek: handle controller_data in mtk_spi_setup spi: mediatek: remove mtk_spi_config spi: mediatek: Update document devicetree bindings to support multiple devices spi: fix kernel-doc warnings about missing return desc in spi.c spi: fix kernel-doc warnings about missing return desc in spi.h spi: pxa2xx: Align a few defines spi: pxa2xx: Save other reg_cs_ctrl bits when configuring chip select ...

spi: Drop owner assignment from spi_drivers

2015-10-28T01:30:17+00:00

An spi_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Andrew F. Davis Acked-by: Jonathan Cameron Signed-off-by: Mark Brown

iio: Export SPI module alias information in missing drivers

2015-08-22T18:07:09+00:00

The SPI core always reports the MODALIAS uevent as "spi:" regardless of the mechanism that was used to register the device (i.e: OF or board code) and the table that is used later to match the driver with the device (i.e: SPI id table or OF match table). So drivers needs to export the SPI id table and this be built into the module or udev won't have the necessary information to autoload the needed driver module when the device is added. Signed-off-by: Javier Martinez Canillas Acked-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron