kernel/linux.git/drivers/iio/dac, branch v7.2-rc3

Merge tag 'char-misc-7.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2026-07-12T19:37:28+00:00

Pull Android/IIO fixes from Greg KH: "Here is a set of bugfixes for 7.2-rc3 that resolve a bunch of reported issues in just the binder and iio codebases. Included in here are: - binder driver bugfixes for both the rust and c versions for reported problems - lots and lots of iio driver bugfixes for lots of reported issues (including a hid sensor driver bugfix) Full details are in the shortlog, all of these have been in linux-next with no reported issues" * tag 'char-misc-7.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (36 commits) iio: event: Fix event FIFO reset race iio: imu: inv_icm42600: fix timestamp clock period by using lower value iio: light: al3010: fix incorrect scale for the highest gain range iio: adc: nxp-sar-adc: Fix the delay calculation in nxp_sar_adc_wait_for() iio: light: tsl2591: return actual error from probe IRQ failure iio: imu: inv_icm42600: fix timestamping by limiting FIFO reading iio: imu: st_lsm6dsx: deselect shub page before reading whoami rust_binder: clear freeze listener on node removal rust_binder: reject context manager self-transaction rust_binder: use a u64 stride when cleaning up the offsets array binder: fix UAF in binder_free_transaction() binder: fix UAF in binder_thread_release() rust_binder: synchronize Rust Binder stats with freeze commands binder: cache secctx size before release zeroes it rust_binder: fix BINDER_GET_EXTENDED_ERROR iio: adc: ad7779: add missing 'select IIO_TRIGGERED_BUFFER' to Kconfig iio: adc: ad4130: add missing `select IIO_TRIGGERED_BUFFER` to Kconfig iio: adc: ti-ads124s08: Return reset GPIO lookup errors iio: temperature: Build mlx90635 with CONFIG_MLX90635 iio: light: al3320a: add missing REGMAP_I2C to Kconfig ...

Replace by more specific (c files)

2026-07-03T05:38:17+00:00

Replace the #include of by the more specific where applicable. For most cases the include can be dropped completely, only a few drivers need one or two headers added. Acked-by: Danilo Krummrich Acked-by: Takashi Sakamoto Acked-by: Bjorn Helgaas Link: https://patch.msgid.link/1a3f2007c5c5dcf555c09a4035ce3ae8ef1b6c49.1782808461.git.u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König (The Capable Hub)

iio: dac: mcp47feb02: Fix passing uninitialized vref1_uV for no Vref1 case

2026-06-29T22:24:45+00:00

Ensure that if a device has Vref1 but reading the regulator returns an error, mcp47feb02_init_ctrl_regs() is not called with an uninitialized vref1_uV value. Also add a device_property_present() check for the Vref1 supply before reading the regulator. Fixes: dd154646d292 ("iio: dac: mcp47feb02: Fix Vref validation [1-999] case") Reported-by: Dan Carpenter Closes: https://lore.kernel.org/all/adiPnla0M5EzvgD-@stanley.mountain/ Signed-off-by: Ariana Lazar Reviewed-by: David Lechner Signed-off-by: Jonathan Cameron

Merge tag 'iio-fixes-for-7.1b' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

2026-06-14T05:56:59+00:00

IIO: 2nd set of fixes for the 7.1 cycle. Usual mixed bag of ancient issues and the recently introduced. Various drivers - Ensure use of simple_write_to_buffer() in debugfs callbacks doesn't result in reading off the end of intended data by checking the position is always 0. buffer/hw-consumer - Ensure scan_mask is freed on buffer release. acpi-als - Check ACPI_COMPANION() against NULL to close corner case where a driver is overridden. adi,ad4062 - Add GPIOLIB dependency to avoid undefined ref to gpiochip_get_data() adi.ad7768-1 - Add GPIOLIB dependency to avoid several undefined functions. adi,ad2s1210 - Ensure possible recovery path if a read fails in the interrupt handler. bosch,bmg160 - Increase sleep on startup to ensure device is ready. bosch,bmp280 - Ensure buffer pushed to kfifo is zeroed to avoid leaking uninitialized stack data to userspace. dyna-image,al3010 - Fix refactor that stopped reading one of the two measurement registers. dyna-image,al3320a - Fix refactor that stopped reading one of the two measurement registers. qcom,spmi-iadc - Ensure disable_irq_wake() is called on remove path. sensiron,scd30 - Fix a sign extension bug. st,vl5310x - Ensure possible recovery path if a read fails in the interrupt handler. ti,adc1298 - Bounds check for pga_settings index. Hardening against device returning unexpected values. ti,tmp006 - Ensure trigger correctly released on remove path. vishay,veml6030 - Fix incorrect channel type in events. vishay,veml6074 - Bounds check for veml6075_it_ms. Hardening against device returning unexpected values. * tag 'iio-fixes-for-7.1b' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (23 commits) iio: adc: ad_sigma_delta: fix clear_pending_event for registerless devices iio: adc: ad_sigma_delta: fix CS held asserted and state leaks iio: light: opt3001: fix missing state reset on timeout iio: chemical: scd30: Cleanup initializations and fix sign-extension bug iio: core: fix uninitialized data in debugfs iio: backend: fix uninitialized data in debugfs iio: dac: ad3552r-hs: fix uninitialized data ni ad3552r_hs_write_data_source() iio: adc: qcom-spmi-iadc: balance enable_irq_wake() on driver unbind iio: light: al3320a: read both ALS ADC registers again iio: light: al3010: read both ALS ADC registers again iio: temperature: tmp006: use devm_iio_trigger_register iio: buffer: hw-consumer: free scan_mask on buffer release iio: adc: ad7768-1: Select GPIOLIB iio: light: veml6030: fix channel type when pushing events iio: light: acpi-als: Check ACPI_COMPANION() against NULL iio: resolver: ad2s1210: notify trigger and clear state on fault read error iio: proximity: vl53l0x: notify trigger and clear IRQ on error paths iio: gyro: bmg160: wait full startup time after mode change at probe iio: gyro: bmg160: bail out when bandwidth/filter is not in table iio: pressure: bmp280: zero-init bmp580 trigger handler buffer ...

iio: dac: ad5686: create bus ops struct

2026-06-02T14:24:48+00:00

Create struct with bus operations, which will be used to extend bus implementation features. Auxiliary functions ad5686_write() and ad5686_read() are created and ad5686_probe() now receives an ops struct pointer rather than individual read and write functions. Reviewed-by: Andy Shevchenko Signed-off-by: Rodrigo Alencar Signed-off-by: Jonathan Cameron

iio: dac: ad5686: cleanup doc header of local structs

2026-06-02T14:24:48+00:00

Review documentation comment header for ad5686_chip_info and ad5686_state. Update variable names and description and remove unnecessary blank line between comment and struct declaration. Reviewed-by: Andy Shevchenko Signed-off-by: Rodrigo Alencar Signed-off-by: Jonathan Cameron

iio: dac: ad5686: add control_sync() for single-channel devices

2026-06-02T14:24:47+00:00

Create ad5310_control_sync() and ad5683_control_sync() functions that properly consume the mask definitions with FIELD_PREP(). This allows to reuse a function that updates the control register with cached values, without relying on confusing logic that depends on st->use_internal_vref, which is initialized earlier in ad5686_probe() because it is also applicable to the AD5686_REGMAP case, removing the need for the has_external_vref. Powerdown masks initialization is simplified as *_control_sync() masks outs any unused bits for the single-channel case. The change cleans up ad5686_write_dac_powerdown() and ad5686_probe(), organizing the code for feature extension, e.g. gain control support for single-channel devices. Signed-off-by: Rodrigo Alencar Signed-off-by: Jonathan Cameron

iio: dac: ad5686: add helpers to handle powerdown masks

2026-06-02T14:24:47+00:00

Add ad5686_pd_field_set() and ad5686_pd_field_get() helpers to cleanup powerdown mask control. Define AD5686_PD_* constants, e.g. AD5686_PD_MSK to hold powerdown mask value for a single channel. AD5686_LDAC_PWRDN_* macros are replaced by AD5686_PD_MODE_*, because they are unused and the LDAC feature for async load of DAC channel values is not related to power down control. Signed-off-by: Rodrigo Alencar Signed-off-by: Jonathan Cameron

iio: dac: ad5686: add of_match table to the spi driver

2026-06-02T14:24:47+00:00

Add of_match table for the SPI device variants to be consistent with the AD5696 I2C driver. Reviewed-by: Andy Shevchenko Signed-off-by: Rodrigo Alencar Signed-off-by: Jonathan Cameron

iio: dac: ad5686: drop enum id

2026-06-02T14:24:47+00:00

Split chip info table into separate structs and expose them to the spi i2c drivers. That is the preferrable approach and allows for the drivers to have knowledge of the device info before the common probe function gets called. Those chip info structs may be shared by SPI and I2C driver variants. Channel declaration definitions are grouped according to channel count and DECLARE_AD5693_CHANNELS() macro is renamed to DECLARE_AD5683_CHANNELS() to match the regmap_type enum. Use spi_get_device_match_data() and i2c_get_match_data() to get chip info struct reference, passing it as parameter to the core probe function. Reviewed-by: Andy Shevchenko Signed-off-by: Rodrigo Alencar Signed-off-by: Jonathan Cameron