kernel/linux.git/drivers/iio/dac, branch v5.15.7

iio: ad5770r: make devicetree property reading consistent

2021-11-18T18:16:07+00:00

commit 26df977a909f818b7d346b3990735513e7e0bf93 upstream. The bindings file for this driver is defining the property as 'reg' but the driver was reading it with the 'num' name. The bindings actually had the 'num' property when added in commit ea52c21268e6 ("dt-bindings: iio: dac: Add docs for AD5770R DAC") and then changed it to 'reg' in commit 2cf3818f18b2 ("dt-bindings: iio: dac: AD5570R fix bindings errors"). However, both these commits landed in v5.7 so the assumption is that either 'num' is not being used or if it is, the validations were not done. Anyways, if someone comes back yelling about this, we might just support both of the properties in the future. Not ideal, but that's life... Fixes: 2cf3818f18b2 ("dt-bindings: iio: dac: AD5570R fix bindings errors") Signed-off-by: Nuno Sá Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20210818080525.62790-1-nuno.sa@analog.com Cc: Stable@vger.kernel.org Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: dac: ad5446: Fix ad5622_write() return value

2021-11-18T18:16:07+00:00

commit 558df982d4ead9cac628153d0d7b60feae05ddc8 upstream. On success i2c_master_send() returns the number of bytes written. The call from iio_write_channel_info(), however, expects the return value to be zero on success. This bug causes incorrect consumption of the sysfs buffer in iio_write_channel_info(). When writing more than two characters to out_voltage0_raw, the ad5446 write handler is called multiple times causing unexpected behavior. Fixes: 3ec36a2cf0d5 ("iio:ad5446: Add support for I2C based DACs") Signed-off-by: Pekka Korpinen Link: https://lore.kernel.org/r/20210929185755.2384-1-pekka.korpinen@iki.fi Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

drivers: iio: dac: ad5766: Fix dt property name

2021-11-18T18:16:07+00:00

commit d9de0fbdeb0103a204055efb69cb5cc8f5f12a6a upstream. In the documentation the name for the property is output-range-microvolts which is a standard name, therefore this name must be used. Fixes: fd9373e41b9ba ("iio: dac: ad5766: add driver support for AD5766") Signed-off-by: Mihail Chindris Reviewed-by: Alexandru Ardelean Link: https://lore.kernel.org/r/20211007080035.2531-5-mihail.chindris@analog.com Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: dac: ti-dac5571: fix an error code in probe()

2021-09-14T11:02:08+00:00

If we have an unexpected number of channels then return -EINVAL instead of returning success. Fixes: df38a4a72a3b ("iio: dac: add TI DAC5571 family support") Signed-off-by: Dan Carpenter Link: https://lore.kernel.org/r/20210816183954.GB2068@kili Signed-off-by: Jonathan Cameron

iio: dac: max5821: convert device register to device managed function

2021-07-31T17:17:22+00:00

Add a device managed hook, via devm_add_action_or_reset() and max5821_regulator_disable(), to disable voltage regulator on device detach. Replace iio_device_register() by devm_iio_device_register() and remove the max5821_remove() function used to unregister the device and disable the voltage regulator. Remove i2c_set_clientdata() from the probe function, since i2c_get_clientdata() is not used anymore. Remove regulator_disable() calls from the probe function. Signed-off-by: Théo Borém Fabris Reviewed-by: Alexandru Ardelean Link: https://lore.kernel.org/r/20210724220159.11998-1-theobf@usp.br Signed-off-by: Jonathan Cameron

iio: dac: ad5624r: Fix incorrect handling of an optional regulator.

2021-07-19T08:51:58+00:00

The naming of the regulator is problematic. VCC is usually a supply voltage whereas these devices have a separate VREF pin. Secondly, the regulator core might have provided a stub regulator if a real regulator wasn't provided. That would in turn have failed to provide a voltage when queried. So reality was that there was no way to use the internal reference. In order to avoid breaking any dts out in the wild, make sure to fallback to the original vcc naming if vref is not available. Signed-off-by: Jonathan Cameron Reported-by: kernel test robot Acked-by: Nuno Sá Link: https://lore.kernel.org/r/20210627163244.1090296-9-jic23@kernel.org

Merge tag 'iio-for-5.14a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

2021-06-09T10:11:49+00:00

Jonathan writes: 1st set of new IIO/counter device support, features and cleanup for 5.14 There are a couple of large cleanup sets in here alongside a number of new drivers. Note an immutable branch merged to add a stub for i2c_verify_client() as needed to avoid a build issue in the fxls8962af driver as a result of a workaround for a device errata that only applies when i2c interface is used. Counters ======== New device support * intel,quadrature encoder peripheral found on Elkhart Lake platforms. - New driver. IIO === New device support * amstaos,tsl2591 ambient light sensor. - New driver + bindings - Follow up fix to ensure some local variables are suitable for error handling. * fsl,fxls8962af + fsl,fxls8964af accelerometers - New driver + bindings - Includes an errata work around that cause a build bot failure fixed by adding a stub to i2c. * kionix,kxcjk-1013 - Add support for KX023-1025 device. Mostly a different register map that needed to be supported. * murata,sca3300 accelerometer - New driver + bindings * st,lsm9ds0 IMU - Rework of st,sensors driver to cleanly support this new glue driver that enables the two parts of the LSM9DS0. * ti,tsc2046 touchscreen controller ADC. - New driver. Intent here is to use this with existing IIO consumer drivers such as resistive-adc-touch. - Follow up fix to avoid an issue with unsigned subtraction in error check. * ti,tmp117 digital temperature sensor - New driver + bindings Features * adi,ad5755 - Add missing dt-binding doc * adi,ad7298 - Add ACPI ID used on Intel Galileo Gen 1 boards. - Add missing dt-binding doc * adi,ad7476 - Add missing dt-binding doc * adi,ad7746 - Add missing dt-binding doc for this driver that will hopefully move out of staging shortly. Update staging driver to use the binding instead of platform data. * adi,adis16201 + adis16209 - Add missing dt-binding doc * adi,adis16480 - Support burst mode for adis16495 and adis16497 parts. * bosch,bma220 - Add missing dt-binding doc * fsl,mma7455 - Add missing dt-binding doc * iio-rescale - Support handling of processed channels from provider. Some ADCs require (typically non linear) calibration functions to be applied, and so provide only IIO_CHAN_INFO_PROCESSED read back. They can be used as providers to the iio-rescale driver which needs to handle them somewhat differently from IIO_CHAN_INFO_RAW * sensiron,sps30 - Support the serial interface. Note this required significant refactoring of existing driver. * st,st-sensors - Add mount matrix support for normal dt-binding whilst continuing to support the odd ACPI approach for accelerometers. * ti,dac082s085 + similar - Add missing dt-binding doc * trivial-devices - add entries for - memsic,mx4005, memsic,mx6255 and memsic,mxc6655 - sensortek,stk8312 and sensortek,stk8ba50 Cleanup / minor fixes * core - Use devm_add_action_or_reset() to replace boilerplate in several driver and core IIO devm_* functions. - Fix an error path issue introduced by above, that could return an error pointer rather than the expected null from dev_iio_device_alloc() - Move more IIO internals related fields from struct iio_dev to struct iio_dev_opaque. - Drop unused final update of in_loc in demux setup. * Docs - Move some docs from driver specific to core dos to avoid replication of names which the documentation builder does not allow. Note this means adding a few device specific notes to the general docs to cover the more unusual uses of the ABI. - ABI: Move old buffer/* and scan_elements/* docs to obsolete as now we have the bufferX/* variant. Not we are not getting rid of these interfaces, just encouraging new code to use the new interface. * IIO wide: - Tidy up new cases of dev.parent etc being set in drivers as the core now does it. - Fix more cases of possible miss-aligned buffers when passed to iio_push_to_buffers_with_timestamp(). Note we only have one known instance of anyone seeing this bug actually happening, so this has been a low priority cleanup effort for several cycles. - sysfs_emit() used in more drivers. - Runtime pm tidy up and use of pm_runtime_resume_and_get() - Buffer alignment fixes as iio_push_to_buffers_with_timestamp requires that the timestamp when inserted by naturally aligned + consumers can assume that all fields are naturally aligned. Part of a long running effort, with at least 2 more series to come tackling additional variants. - Stop specifying "mount-matrix" property name in every lookup of the mount matrix from firmware by hard coding it in the core. * adi,ad7476 - Handle the variety of different regulators used by the parts supported by this driver (came up in dt-binding review) * adi,ad7746 - Trivial drop of if (ret) return ret; return 0; pattern - Tidy up comments - Pull capdac setup out to own function. * adi,ad7766 - Trivial drop of if (ret) return ret; return 0; pattern * adi,adis - Avoid returning error codes in interrupt handlers. - Handle a failure in spi_write in the trigger handler. - Rework to add updating of device page after changing it. - Don't push data to IIO buffers when read failed. - Add configuration of burst max speed to core avoid handling this in each driver. - Use the adis_dev_lock() helper in adis16260 and adis16136 drivers. - Excessive includes cleanup via include-what-you-use static checker after zero day highlighted that these needed updating. * afe - Amend binding to add #io-channel-cells, thus allowing this IIO consumer to also be an IIO provider. * aosong,am2315 - Drop ACPI id. Unlikely this one is in the wild and it isn't valid ACPI naming. * bosch,bma180 - Adding missing bandwidth settings (500, 1000 Hz) * bosch,bme680 - Drop ACPI id. Unlikely this one is in the wild and it isn't valid ACPI naming. * ep93xx_adc, - Drop a redundant error print. * maxim,max118 - Convert remainder of probe() to devm_ managed functions. - Avoid some repeated jumping back and forth between iio_dev and spi structures. * maxim,max11100 - Use get_unaligned_be16() instead of open coding. - Convert remainder of probe() to devm_ managed functions. * samsung,exynos_adc - Unused error value dropped. * sensiron,sgp30 - Drop use of %hx in favor of %x and letting the normal type conversion work. * sensortek,stk8312 - Add lowercase device id and note uppercase version deprecated. - Drop ACPI id. Unlikely this one is in the wild and it isn't valid ACPI naming. * sprx,sc72xx_adc - add MODULE_DEVICE_TABLE * st,lsm6dsx - Fix docs of valid ODRs * st,sensors - dt-binding rework. Two efforts on this crossed in a previous cycle so this update cherry picks the best of the two yaml conversions. - Don't copy the channel spec array as now ext_info is no longer modified. * st,stm32-adc - tidy up some docs that were marked as kernel-doc but aren't. * ti,adc081c, ti,adc0832, ti,adc108s102 and ti,adc161s626 - Convert remainder of probe() functions to devm_ managed functions to simplify error handing and remove paths. * tag 'iio-for-5.14a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (171 commits) i2c: core: Add stub for i2c_verify_client() if !CONFIG_I2C iio: adis: Cleanout unused headers iio: accel: bma180: Add missing 500 Hz / 1000 Hz bandwidth counter: Add support for Intel Quadrature Encoder Peripheral staging: iio: cdc: ad7746: extract capac setup to own function staging: iio: cdc: ad7746: clean up probe return staging: iio: cdc: ad7746: remove ordinary comments iio: adc: ti-adc161s626: Use devm managed functions for all of probe. iio: adc: ti-adc108s102: Use devm managed functions for all of probe() iio: adc: ti-adc0832: Use devm managed functions for all of probe() iio: adc: ti-adc081c: Use devm managed functions for all of probe() iio: adc: max1118: Avoid jumping back and forth between spi and iio structures iio: adc: max1118: Use devm_ managed functions for all of probe iio: adc: max11100: Use devm_ functions for rest of probe() iio: adc: max11100: Use get_unaligned_be16() rather than opencoding. iio: chemical: sgp30: Drop use of %hx in format string. iio: gyro: st_gyro: Support mount matrix iio: magnetometer: st_magn: Support mount matrix iio: accel: st_sensors: Stop copying channels iio: accel: st_sensors: Support generic mounting matrix ...

iio: dac: ad5770r: Put fwnode in error case during ->probe()

2021-05-22T07:32:36+00:00

device_for_each_child_node() bumps a reference counting of a returned variable. We have to balance it whenever we return to the caller. Fixes: cbbb819837f6 ("iio: dac: ad5770r: Add AD5770R support") Cc: Alexandru Tachici Signed-off-by: Andy Shevchenko Reviewed-by: Alexandru Ardelean Link: https://lore.kernel.org/r/20210510095649.3302835-1-andy.shevchenko@gmail.com Cc: Signed-off-by: Jonathan Cameron

iio: dac: stm32-dac: Use pm_runtime_resume_and_get() to replace open coding.

2021-05-17T12:54:26+00:00

Found using coccicheck script under review at: https://lore.kernel.org/lkml/20210427141946.2478411-1-Julia.Lawall@inria.fr/ This is a prequel to taking a closer look at the runtime pm in IIO drivers in general Signed-off-by: Jonathan Cameron Cc: Fabrice Gasnier Reviewed-by: Fabrice Gasnier Reviewed-by: Mauro Carvalho Chehab Link: https://lore.kernel.org/r/20210509113354.660190-17-jic23@kernel.org

iio: dac: ad5766: Drop duplicate setting of iio_dev.dev.parent and of_node

2021-05-17T12:49:12+00:00

This is set to the same value in devm_iio_device_alloc() so no need to do it again. Signed-off-by: Jonathan Cameron Cc: Cristian Pop Reviewed-by: Alexandru Ardelean Link: https://lore.kernel.org/r/20210426170251.351957-3-jic23@kernel.org