kernel/linux.git/drivers/iio/common, branch v4.14.263

iio: ssp_sensors: fix error code in ssp_print_mcu_debug()

2021-10-20T08:42:04+00:00

commit 4170d3dd1467e9d78cb9af374b19357dc324b328 upstream. The ssp_print_mcu_debug() function should return negative error codes on error. Returning "length" is meaningless. This change does not affect runtime because the callers only care about zero/non-zero. Reported-by: Jonathan Cameron Fixes: 50dd64d57eee ("iio: common: ssp_sensors: Add sensorhub driver") Signed-off-by: Dan Carpenter Link: https://lore.kernel.org/r/20210914105333.GA11657@kili Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: ssp_sensors: add more range checking in ssp_parse_dataframe()

2021-10-20T08:42:04+00:00

commit 8167c9a375ccceed19048ad9d68cb2d02ed276e0 upstream. The "idx" is validated at the start of the loop but it gets incremented during the iteration so it needs to be checked again. Fixes: 50dd64d57eee ("iio: common: ssp_sensors: Add sensorhub driver") Signed-off-by: Dan Carpenter Link: https://lore.kernel.org/r/20210909091336.GA26312@kili Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: common: ssp_sensors: Initialize calculated_time in ssp_common_process_data

2019-05-31T13:47:29+00:00

[ Upstream commit 6f9ca1d3eb74b81f811a87002de2d51640d135b1 ] When building with -Wsometimes-uninitialized, Clang warns: drivers/iio/common/ssp_sensors/ssp_iio.c:95:6: warning: variable 'calculated_time' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized] While it isn't wrong, this will never be a problem because iio_push_to_buffers_with_timestamp only uses calculated_time on the same condition that it is assigned (when scan_timestamp is not zero). While iio_push_to_buffers_with_timestamp is marked as inline, Clang does inlining in the optimization stage, which happens after the semantic analysis phase (plus inline is merely a hint to the compiler). Fix this by just zero initializing calculated_time. Link: https://github.com/ClangBuiltLinux/linux/issues/394 Signed-off-by: Nathan Chancellor Reviewed-by: Nick Desaulniers Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin

iio: cros_ec: Fix the maths for gyro scale calculation

2019-04-27T07:35:35+00:00

commit 3d02d7082e5823598090530c3988a35f69689943 upstream. Calculation did not use IIO_DEGREE_TO_RAD and implemented a variant to avoid precision loss as we aim a nano value. The offset added to avoid rounding error, though, doesn't give us a close result to the expected value. E.g. For 1000dps, the result should be: (1000 * pi ) / 180 >> 15 ~= 0.000532632218 But with current calculation we get $ cat scale 0.000547890 Fix the calculation by just doing the maths involved for a nano value val * pi * 10e12 / (180 * 2^15) so we get a closer result. $ cat scale 0.000532632 Fixes: c14dca07a31d ("iio: cros_ec_sensors: add ChromeOS EC Contiguous Sensors driver") Signed-off-by: Gwendal Grignou Signed-off-by: Enric Balletbo i Serra Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: st_sensors: add register mask for status register

2017-12-25T13:26:26+00:00

[ Upstream commit e72a060151e5bb673af24993665e270fc4f674a7 ] Introduce register mask for data-ready status register since pressure sensors (e.g. LPS22HB) export just two channels (BIT(0) and BIT(1)) and BIT(2) is marked reserved while in st_sensors_new_samples_available() value read from status register is masked using 0x7. Moreover do not mask status register using active_scan_mask since now status value is properly masked and if the result is not zero the interrupt has to be consumed by the driver. This fix an issue on LPS25H and LPS331AP where channel definition is swapped respect to status register. Furthermore that change allows to properly support new devices (e.g LIS2DW12) that report just ZYXDA (data-ready) field in status register to figure out if the interrupt has been generated by the device. Fixes: 97865fe41322 (iio: st_sensors: verify interrupt event to status) Signed-off-by: Lorenzo Bianconi Reviewed-by: Linus Walleij Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

Merge tag 'iio-fixes-for-4.14a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

2017-09-25T08:58:22+00:00

Jonathan writes: First round of IIO fixes for the 4.14 cycle Note this includes fixes from recent merge window. As such the tree is based on top of a prior staging/staging-next tree. * iio core - return and error for a failed read_reg debugfs call rather than eating the error. * ad7192 - Use the dedicated reset function in the ad_sigma_delta library instead of an spi transfer with the data on the stack which could cause problems with DMA. * ad7793 - Implement a dedicate reset function in the ad_sigma_delta library and use it to correctly reset this part. * bme280 - ctrl_reg write must occur after any register writes for updates to take effect. * mcp320x - negative voltage readout was broken. - Fix an oops on module unload due to spi_set_drvdata not being called in probe. * st_magn - Fix the data ready line configuration for the lis3mdl. It is not configurable so the st_magn core was assuming it didn't exist and so wasn't consuming interrupts resulting in an unhandled interrupt. * stm32-adc - off by one error on max channels checking. * stm32-timer - preset should not be buffered - reorganising register writes avoids this. - fix a corner case in which write preset goes wrong when a timer is used first as a trigger then as a counter with preset. Odd case but you never know. * ti-ads1015 - Fix setting of comparator polarity by fixing bitfield definition. * twl4030 - Error path handling fix to cleanup in event of regulator registration failure. - Disable the vusb3v1 regulator correctly in error handling - Don't paper over a regulator enable failure.

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid

2017-09-05T18:54:41+00:00

Pull HID update from Jiri Kosina: - Wacom driver fixes/updates (device name generation improvements, touch ring status support) from Jason Gerecke - T100 touchpad support from Hans de Goede - support for batteries driven by HID input reports, from Dmitry Torokhov - Arnd pointed out that driver_lock semaphore is superfluous, as driver core already provides all the necessary concurency protection. Removal patch from Binoy Jayan - logical minimum numbering improvements in sensor-hub driver, from Srinivas Pandruvada - support for Microsoft Win8 Wireless Radio Controls extensions from João Paulo Rechi Vita - assorted small fixes and device ID additions * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (28 commits) HID: prodikeys: constify snd_rawmidi_ops structures HID: sensor: constify platform_device_id HID: input: throttle battery uevents HID: usbmouse: constify usb_device_id and fix space before '[' error HID: usbkbd: constify usb_device_id and fix space before '[' error. HID: hid-sensor-hub: Force logical minimum to 1 for power and report state HID: wacom: Do not completely map WACOM_HID_WD_TOUCHRINGSTATUS usage HID: asus: Add T100CHI bluetooth keyboard dock touchpad support HID: ntrig: constify attribute_group structures. HID: logitech-hidpp: constify attribute_group structures. HID: sensor: constify attribute_group structures. HID: multitouch: constify attribute_group structures. HID: multitouch: use proper symbolic constant for 0xff310076 application HID: multitouch: Support Asus T304UA media keys HID: multitouch: Support HID_GD_WIRELESS_RADIO_CTLS HID: input: optionally use device id in battery name HID: input: map digitizer battery usage HID: Remove the semaphore driver_lock HID: wacom: add USB_HID dependency HID: add ALWAYS_POLL quirk for Logitech 0xc077 ...

iio: magnetometer: st_magn: fix drdy line configuration for LIS3MDL

2017-09-03T16:39:39+00:00

Data-ready line in LIS3MDL is routed to drdy pin and it is not possible to select a different INT pin. st_sensors_set_dataready_irq() assumes that if drdy int address is not exported in register map, irq trigger is not supported by the sensor and hw_irq_trigger is always false. Based on this configuration st_sensors_irq_thread does not consume generated interrupt causing an unhandled irq. Fix this taking into account status register address in st_sensors_set_dataready_irq() Fixes: 90efe0556292 (iio: st_sensors: harden interrupt handling) Signed-off-by: Lorenzo Bianconi Cc: Signed-off-by: Jonathan Cameron

Merge 4.13-rc7 into staging-next

2017-08-28T13:26:48+00:00

We want the staging and iio fixes in here to handle the merge issues. Signed-off-by: Greg Kroah-Hartman