kernel/linux.git/drivers/iio/adc, branch v7.0.10

iio: adc: ad7768-1: remove switch to one-shot mode

2026-05-07T04:13:55+00:00

commit 81fdc3127d013a552465c3bf9829afbed5184406 upstream. wideband low ripple FIR Filter is not available in one-shot mode. In order to make direct reads work for all filter options, remove the switch for one-shot mode and guarantee device is always in continuous conversion mode. Fixes: fb1d3b24ebf5 ("iio: adc: ad7768-1: add filter type and oversampling ratio attributes") Signed-off-by: Jonathan Santos Reviewed-by: David Lechner Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: adc: ad7768-1: fix one-shot mode data acquisition

2026-05-07T04:13:55+00:00

commit 8be19e233744961db6069da9c9ab63eb085a0447 upstream. According to the datasheet, one-shot mode requires a SYNC_IN pulse to trigger a new sample conversion. In the current implementation, No sync pulse was sent after switching to one-shot mode and reinit_completion() was called before mode switching, creating a race condition where spurious interrupts during mode change could trigger completion prematurely. Fix by sending a sync pulse after configuring one-shot mode and reinit_completion() to ensure it only waits for the actual conversion completion. Fixes: a5f8c7da3dbe ("iio: adc: Add AD7768-1 ADC basic support") Signed-off-by: Jonathan Santos Reviewed-by: David Lechner Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: adc: ti-ads7950: use iio_push_to_buffers_with_ts_unaligned()

2026-05-07T04:13:54+00:00

commit 7806c060cceb2d6895efbb6cff2f2f17cf1ec5de upstream. Use iio_push_to_buffers_with_ts_unaligned() to avoid unaligned access when writing the timestamp in the rx_buf. The previous implementation would have been fine on architectures that support 4-byte alignment of 64-bit integers but could cause issues on architectures that require 8-byte alignment. Fixes: 902c4b2446d4 ("iio: adc: New driver for TI ADS7950 chips") Signed-off-by: David Lechner Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: adc: nxp-sar-adc: Fix DMA channel leak in trigger mode

2026-03-22T12:15:31+00:00

The DMA channel was requested in nxp_sar_adc_buffer_postenable() but was only released in nxp_sar_adc_buffer_software_do_predisable(). This caused a DMA channel resource leak when operating in trigger mode. Fix this by moving dma_request_chan() from nxp_sar_adc_buffer_postenable() into nxp_sar_adc_buffer_software_do_postenable(), ensuring the DMA channel is only requested in software mode. Fixes: 4434072a893e ("iio: adc: Add the NXP SAR ADC support for the s32g2/3 platforms") Signed-off-by: Felix Gu Cc: Signed-off-by: Jonathan Cameron

iio: adc: ti-adc161s626: use DMA-safe memory for spi_read()

2026-03-21T20:45:18+00:00

Add a DMA-safe buffer and use it for spi_read() instead of a stack memory. All SPI buffers must be DMA-safe. Since we only need up to 3 bytes, we just use a u8[] instead of __be16 and __be32 and change the conversion functions appropriately. Fixes: 4d671b71beef ("iio: adc: ti-adc161s626: add support for TI 1-channel differential ADCs") Signed-off-by: David Lechner Reviewed-by: Andy Shevchenko Cc: Signed-off-by: Jonathan Cameron

iio: adc: ti-adc161s626: fix buffer read on big-endian

2026-03-21T20:41:45+00:00

Rework ti_adc_trigger_handler() to properly handle data on big-endian architectures. The scan data format is 16-bit CPU-endian, so we can't cast it to a int * on big-endian and expect it to work. Instead, we introduce a local int variable to read the data into, and then copy it to the buffer. Since the buffer isn't passed to any SPI functions, we don't need it to be DMA-safe. So we can drop it from the driver data struct and just use stack memory for the scan data. Since there is only one data value (plus timestamp), we don't need an array and can just declare a struct with the correct data type instead. Also fix alignment of iio_get_time_ns() to ( while we are touching this. Fixes: 4d671b71beef ("iio: adc: ti-adc161s626: add support for TI 1-channel differential ADCs") Signed-off-by: David Lechner Cc: Signed-off-by: Jonathan Cameron

iio: adc: aspeed: clear reference voltage bits before configuring vref

2026-03-07T13:27:38+00:00

Ensures the reference voltage bits are cleared in the ADC engine control register before configuring the voltage reference. This avoids potential misconfigurations caused by residual bits. Fixes: 1b5ceb55fec2 ("iio: adc: aspeed: Support ast2600 adc.") Signed-off-by: Billy Tsai Cc: Signed-off-by: Jonathan Cameron

iio: adc: ti-ads1119: Reinit completion before wait_for_completion_timeout()

2026-03-07T13:18:09+00:00

The completion is not reinit before wait_for_completion_timeout(), so wait_for_completion_timeout() will return immediately after the first successful completion. Fixes: a9306887eba4 ("iio: adc: ti-ads1119: Add driver") Signed-off-by: Felix Gu Reviewed-by: Francesco Dolcini Cc: Signed-off-by: Jonathan Cameron

iio: adc: ti-ads1018: fix type overflow for data rate

2026-03-07T13:17:59+00:00

The variable 'drate' is currently defined as u8. However, the data rate values in ads1018 can reach up to 3300 Hz, which exceeds the maximum value of 255 that a u8 can hold. Change the type of 'drate' to u32 to match the data_rate_mode_to_hz array definition and ensure the data rate is handled correctly. Fixes: bf0bba486b5b ("iio: adc: Add ti-ads1018 driver") Signed-off-by: Chunyang Chen Reviewed-by: Andy Shevchenko Reviewed-by: Kurt Borja Signed-off-by: Jonathan Cameron

iio: adc: ti-ads7950: do not clobber gpio state in ti_ads7950_get()

2026-03-07T11:40:37+00:00

GPIO state was inadvertently overwritten by the result of spi_sync(), resulting in ti_ads7950_get() only returning 0 as GPIO state (or error). Fix this by introducing a separate variable to hold the state. Fixes: c97dce792dc8 ("iio: adc: ti-ads7950: add GPIO support") Reported-by: David Lechner Signed-off-by: Dmitry Torokhov Cc: Signed-off-by: Jonathan Cameron