kernel/linux.git/drivers/iio/adc, branch v6.2.2

iio:adc:twl6030: Enable measurement of VAC

2022-12-28T17:20:04+00:00

VAC needs to be wired up to produce proper measurements, without this change only near zero values are reported. Reported-by: kernel test robot Reported-by: Julia Lawall Fixes: 1696f36482e7 ("iio: twl6030-gpadc: TWL6030, TWL6032 GPADC driver") Signed-off-by: Andreas Kemnade Link: https://lore.kernel.org/r/20221217221305.671117-1-andreas@kemnade.info Signed-off-by: Jonathan Cameron

iio:adc:twl6030: Enable measurements of VUSB, VBAT and others

2022-12-28T17:20:03+00:00

Some inputs need to be wired up to produce proper measurements, without this change only near zero values are reported. Signed-off-by: Andreas Kemnade Fixes: 1696f36482e70 ("iio: twl6030-gpadc: TWL6030, TWL6032 GPADC driver") Link: https://lore.kernel.org/r/20221201181635.3522962-1-andreas@kemnade.info Cc: Signed-off-by: Jonathan Cameron

iio: imx8qxp-adc: fix irq flood when call imx8qxp_adc_read_raw()

2022-12-28T17:20:03+00:00

irq flood happen when run cat /sys/bus/iio/devices/iio:device0/in_voltage1_raw imx8qxp_adc_read_raw() { ... enable irq /* adc start */ writel(1, adc->regs + IMX8QXP_ADR_ADC_SWTRIG); ^^^^ trigger irq flood. wait_for_completion_interruptible_timeout(); readl(adc->regs + IMX8QXP_ADR_ADC_RESFIFO); ^^^^ clear irq here. ... } There is only FIFO watermark interrupt at this ADC controller. IRQ line will be assert until software read data from FIFO. So IRQ flood happen during wait_for_completion_interruptible_timeout(). Move FIFO read into irq handle to avoid irq flood. Fixes: 1e23dcaa1a9f ("iio: imx8qxp-adc: Add driver support for NXP IMX8QXP ADC") Cc: stable@vger.kernel.org Signed-off-by: Frank Li Reviewed-by: Cai Huoqing Reviewed-by: Haibo Chen Link: https://lore.kernel.org/r/20221201140110.2653501-1-Frank.Li@nxp.com Cc: Signed-off-by: Jonathan Cameron

iio: adc: xilinx-ams: fix devm_krealloc() return value check

2022-12-28T17:20:03+00:00

The clang-analyzer reported a warning: "Value stored to 'ret' is never read". Fix the return value check if devm_krealloc() fails to resize ams_channels. Fixes: d5c70627a794 ("iio: adc: Add Xilinx AMS driver") Signed-off-by: Marco Pagani Acked-by: Michal Simek Link: https://lore.kernel.org/r/20221125113112.219290-1-marpagan@redhat.com Cc: Signed-off-by: Jonathan Cameron

iio: adc: berlin2-adc: Add missing of_node_put() in error path

2022-12-28T17:20:03+00:00

of_get_parent() will return a device_node pointer with refcount incremented. We need to use of_node_put() on it when done. Add the missing of_node_put() in the error path of berlin2_adc_probe(); Fixes: 70f1937911ca ("iio: adc: add support for Berlin") Signed-off-by: Xiongfeng Wang Link: https://lore.kernel.org/r/20221129020316.191731-1-wangxiongfeng2@huawei.com Cc: Signed-off-by: Jonathan Cameron

iio: adc: stm32-dfsdm: fill module aliases

2022-12-28T17:20:03+00:00

When STM32 DFSDM driver is built as module, no modalias information is available. This prevents module to be loaded by udev. Add MODULE_DEVICE_TABLE() to fill module aliases. Fixes: e2e6771c6462 ("IIO: ADC: add STM32 DFSDM sigma delta ADC support") Signed-off-by: Olivier Moysan Link: https://lore.kernel.org/r/20221202152848.45585-1-olivier.moysan@foss.st.com Signed-off-by: Jonathan Cameron

Merge tag 'char-misc-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2022-12-16T11:49:24+00:00

Pull char/misc driver updates from Greg KH: "Here is the large set of char/misc and other driver subsystem changes for 6.2-rc1. Nothing earth-shattering in here at all, just a lot of new driver development and minor fixes. Highlights include: - fastrpc driver updates - iio new drivers and updates - habanalabs driver updates for new hardware and features - slimbus driver updates - speakup module parameters added to aid in boot time configuration - i2c probe_new conversions for lots of different drivers - other small driver fixes and additions One semi-interesting change in here is the increase of the number of misc dynamic minors available to 1048448 to handle new huge-cpu systems. All of these have been in linux-next for a while with no reported problems" * tag 'char-misc-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (521 commits) extcon: usbc-tusb320: Convert to i2c's .probe_new() extcon: rt8973: Convert to i2c's .probe_new() extcon: fsa9480: Convert to i2c's .probe_new() extcon: max77843: Replace irqchip mask_invert with unmask_base chardev: fix error handling in cdev_device_add() mcb: mcb-parse: fix error handing in chameleon_parse_gdd() drivers: mcb: fix resource leak in mcb_probe() coresight: etm4x: fix repeated words in comments coresight: cti: Fix null pointer error on CTI init before ETM coresight: trbe: remove cpuhp instance node before remove cpuhp state counter: stm32-lptimer-cnt: fix the check on arr and cmp registers update misc: fastrpc: Add dma_mask to fastrpc_channel_ctx misc: fastrpc: Add mmap request assigning for static PD pool misc: fastrpc: Safekeep mmaps on interrupted invoke misc: fastrpc: Add support for audiopd misc: fastrpc: Rework fastrpc_req_munmap misc: fastrpc: Use fastrpc_map_put in fastrpc_map_create on fail misc: fastrpc: Add fastrpc_remote_heap_alloc misc: fastrpc: Add reserved mem support misc: fastrpc: Rename audio protection domain to root ...

Merge tag 'input-for-v6.2-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2022-12-13T21:20:36+00:00

Pull input updates from Dmitry Torokhov: - a new driver for Cypress Generation 5 touchscreens - a new driver for Hynitron cstxxx touchscreens - a new driver for Himax hx83112b touchscreen - I2C input devices have been converted to use i2c's probe_new() - a large number of input devices are now using DEFINE_SIMPLE_DEV_PM_OPS and pm_sleep_ptr() and no longer use __maybe_unused annotations - improvements to msg2638 touchscreen driver to also support msg2138 - conversion of several input deevine bindings to yaml/DT schema - changes to select touch drivers to move handling of wake irqs to the PM core - other assorted fixes and improvements. * tag 'input-for-v6.2-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (165 commits) Input: elants_i2c - delay longer with reset asserted dt-bindings: input: Convert ti,drv260x to DT schema dt-bindings: input: gpio-beeper: Convert to yaml schema Input: pxspad - fix unused data warning when force feedback not enabled Input: lpc32xx - allow building with COMPILE_TEST Input: nomadik-ske-keypad - allow building with COMPILE_TEST Input: pxa27xx-keypad - allow build with COMPILE_TEST Input: spear-keyboard - improve build coverage using COMPILE_TEST Input: tegra-kbc - allow build with COMPILE_TEST Input: tegra-kbc - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() Input: tca6416-keypad - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() Input: tc3589x - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() Input: st-keyscan - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() Input: sh-keysc - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() Input: qt1070 - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() Input: pxa27x_keypad - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() Input: pmic8xxx-keypad - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() Input: nomadik-ske-keypad - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() Input: mcs-touchkey - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() Input: max7359-keypad - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() ...

Merge tag 'iio-fixes-for-6.1d' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

2022-11-27T14:05:05+00:00

Jonathan writes: 4th set of IIO fixes for 6.1 Single patch fixing a memory leak in an error path. Fine to queue either for 6.2 if too late for 6.1 * tag 'iio-fixes-for-6.1d' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: iio: fix memory leak in iio_device_register_eventset() dt-bindings: iio: adc: Remove the property "aspeed,trim-data-valid" iio: adc: aspeed: Remove the trim valid dts property. iio: core: Fix entry not deleted when iio_register_sw_trigger_type() fails iio: accel: bma400: Fix memory leak in bma400_get_steps_reg() iio: light: rpr0521: add missing Kconfig dependencies iio: health: afe4404: Fix oob read in afe4404_[read|write]_raw iio: health: afe4403: Fix oob read in afe4403_read_raw iio: light: apds9960: fix wrong register for gesture gain

Merge tag 'iio-for-6.2b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

2022-11-27T13:40:05+00:00

Jonathan writes: 2nd set of IIO new device support, cleanups etc for 6.2 Includes a few late breaking fixes for old issues. Contains a large set of conversions from i2c probe() to probe_new() as part of an attempt to finally get rid of the old style probe(). New devices support * adi,ad74115 - New driver for this complex input/output device with 16 bit ADCs, 14 bit DACs amongst other features. - A few tidy ups / removal of unused data patches followed. * adi,adf4377 - New driver for this dual output integer-N phased locked loop and VCO chip. * maxim,max30208 - New driver for this high accuracy digital temperature sensor. * st,lsm6dsx - Support for LSM6DS016IS (chip specific data) - Support for ISM330IS (id entry only) Minor cleanups etc * adi,adis - Fix a deadlock on device instance specific mutex. - Tidy up by calling unlocked form of __adis_initial_startup() in all cases and dropping the locked version. * adi,ad4130 - Reference spi-peripehral-props.yaml in the dt-binding. * adi,ad74413r - Fix a bug brought on by integer promotion of signed value to unsigned type. - Add an spi_device_id table to allow module autoloading to work. - Add support for reset pin. * adi,ad7606_par - devm_platform_get_and_ioremap_resource() instead of opencoding. * adi,ad7923 - Add dt-bindings docs for ad7927 via a fallback to ad7928 and do similar for ad7924. * adi,ltc2983 - Drop a now unneeded $ref for -nanoamp property as dt-schema no covers this unit. * maxim,max11410 - Fix mask due to repeated use of VREFN instead of one of them being VREFP. * qcom,spmi-iadc - Add fallback compatibles to dt-binding. * renesas,rzg2l - Document use for RZ/Five SoC. * st,stm32-adc - Improved calibration support with error logging and a debugfs interface to read back the result. * ti,adc128s052 - Fix an issue with missing data members in the adc128_of_match table that meant all device were being handled as adc128s052 ADCs. * tag 'iio-for-6.2b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (178 commits) iio: addac: ad74413r: fix blank line after declaration warning iio: addac: ad74115: remove unused ad74115_dac_slew_rate_hz_tbl dt-bindings: iio: imu: st_lsm6dsx: add ism330is iio: imu: st_lsm6dsx: add support to ISM330IS iio: frequency: adf4377: add support for ADF4377 dt-bindings: iio: frequency: add adf4377 doc dt-bindings: iio: adc: ad4130: use spi-peripheral-props.yaml dt-bindings: iio: temperature: ltc2983: drop $ref for -nanoamp properties dt-bindings: iio: adc: renesas,rzg2l-adc: Document RZ/Five SoC iio: adc128s052: add proper .data members in adc128_of_match table iio: adc: stm32-adc: add debugfs to read raw calibration result iio: adc: stm32-adc: improve calibration error log iio: adc: stm32-adc: smart calibration support iio: addac: ad74413r: add support for reset-gpio dt-bindings: iio: ad74413r: add optional reset-gpios iio: addac: ad74413r: add spi_device_id table dt-bindings: iio/adc: qcom,spmi-iadc: use double compatibles dt-bindings: iio: imu: st_lsm6dsx: add lsm6dso16is iio: imu: st_lsm6dsx: add support to LSM6DSO16IS iio: addac: add AD74115 driver ...