kernel/linux.git/drivers/iio/accel, branch v4.14.217

iio: accel: kxcjk1013: Add support for KIOX010A ACPI DSM for setting tablet-mode

2020-11-24T12:05:54+00:00

commit e5b1032a656e9aa4c7a4df77cb9156a2a651a5f9 upstream. Some 360 degree hinges (yoga) style 2-in-1 devices use 2 KXCJ91008-s to allow the OS to determine the angle between the display and the base of the device, so that the OS can determine if the 2-in-1 is in laptop or in tablet-mode. On Windows both accelerometers are read by a special HingeAngleService process; and this process calls a DSM (Device Specific Method) on the ACPI KIOX010A device node for the sensor in the display, to let the embedded-controller (EC) know about the mode so that it can disable the kbd and touchpad to avoid spurious input while folded into tablet-mode. This notifying of the EC is problematic because sometimes the EC comes up thinking that device is in tablet-mode and the kbd and touchpad do not work. This happens for example on Irbis NB111 devices after a suspend / resume cycle (after a complete battery drain / hard reset without having booted Windows at least once). Other 2-in-1s which are likely affected too are e.g. the Teclast F5 and F6 series. The kxcjk-1013 driver may seem like a strange place to deal with this, but since it is *the* driver for the ACPI KIOX010A device, it is also the driver which has access to the ACPI handle needed by the DSM. Add support for calling the DSM and on probe unconditionally tell the EC that the device is laptop mode, fixing the kbd and touchpad sometimes not working. Fixes: 7f6232e69539 ("iio: accel: kxcjk1013: Add KIOX010A ACPI Hardware-ID") Reported-and-tested-by: russianneuromancer Signed-off-by: Hans de Goede Cc: Link: https://lore.kernel.org/r/20201110133835.129080-3-hdegoede@redhat.com Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: accel: kxcjk1013: Replace is_smo8500_device with an acpi_type enum

2020-11-24T12:05:53+00:00

commit 11e94f28c3de35d5ad1ac6a242a5b30f4378991a upstream. Replace the boolean is_smo8500_device variable with an acpi_type enum. For now this can be either ACPI_GENERIC or ACPI_SMO8500, this is a preparation patch for adding special handling for the KIOX010A ACPI HID, which will add a ACPI_KIOX010A acpi_type to the introduced enum. For stable as needed as precursor for next patch. Signed-off-by: Hans de Goede Fixes: 7f6232e69539 ("iio: accel: kxcjk1013: Add KIOX010A ACPI Hardware-ID") Cc: Link: https://lore.kernel.org/r/20201110133835.129080-2-hdegoede@redhat.com Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio:accel:mma8452: Fix timestamp alignment and prevent data leak.

2020-09-23T08:46:29+00:00

commit 89226a296d816727405d3fea684ef69e7d388bd8 upstream. One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses a 16 byte u8 array on the stack. As Lars also noted this anti pattern can involve a leak of data to userspace and that indeed can happen here. We close both issues by moving to a suitable structure in the iio_priv() data with alignment ensured by use of an explicit c structure. This data is allocated with kzalloc so no data can leak appart from previous readings. The additional forcing of the 8 byte alignment of the timestamp is not strictly necessary but makes the code less fragile by making this explicit. Fixes: c7eeea93ac60 ("iio: Add Freescale MMA8452Q 3-axis accelerometer driver") Reported-by: Lars-Peter Clausen Cc: Peter Meerwald Signed-off-by: Jonathan Cameron Reviewed-by: Andy Shevchenko Cc: Signed-off-by: Greg Kroah-Hartman

iio:accel:mma7455: Fix timestamp alignment and prevent data leak.

2020-09-23T08:46:29+00:00

commit 7e5ac1f2206eda414f90c698fe1820dee873394d upstream. One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses a 16 byte u8 array on the stack As Lars also noted this anti pattern can involve a leak of data to userspace and that indeed can happen here. We close both issues by moving to a suitable structure in the iio_priv() data with alignment ensured by use of an explicit c structure. This data is allocated with kzalloc so no data can leak appart from previous readings. The force alignment of ts is not strictly necessary in this particularly case but does make the code less fragile. Fixes: a84ef0d181d9 ("iio: accel: add Freescale MMA7455L/MMA7456L 3-axis accelerometer driver") Reported-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron Cc: Reviewed-by: Andy Shevchenko Signed-off-by: Greg Kroah-Hartman

iio: accel: kxsd9: Fix alignment of local buffer.

2020-09-23T08:46:29+00:00

commit 95ad67577de4ea08eb8e441394e698aa4addcc0b upstream. iio_push_to_buffers_with_timestamp assumes 8 byte alignment which is not guaranteed by an array of smaller elements. Note that whilst in this particular case the alignment forcing of the ts element is not strictly necessary it acts as good documentation. Doing this where not necessary should cut down on the number of cut and paste introduced errors elsewhere. Fixes: 0427a106a98a ("iio: accel: kxsd9: Add triggered buffer handling") Reported-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron Reviewed-by: Andy Shevchenko Cc: Signed-off-by: Greg Kroah-Hartman

iio:accel:bmc150-accel: Fix timestamp alignment and prevent data leak.

2020-09-23T08:46:28+00:00

commit a6f86f724394de3629da63fe5e1b7a4ab3396efe upstream. One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses a 16 byte array of smaller elements on the stack. As Lars also noted this anti pattern can involve a leak of data to userspace and that indeed can happen here. We close both issues by moving to a suitable structure in the iio_priv() data with alignment ensured by use of an explicit c structure. This data is allocated with kzalloc so no data can leak appart from previous readings. Fixes tag is beyond some major refactoring so likely manual backporting would be needed to get that far back. Whilst the force alignment of the ts is not strictly necessary, it does make the code less fragile. Fixes: 3bbec9773389 ("iio: bmc150_accel: add support for hardware fifo") Reported-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron Acked-by: Srinivas Pandruvada Reviewed-by: Andy Shevchenko Cc: Signed-off-by: Greg Kroah-Hartman

iio: mma8452: Add missed iio_device_unregister() call in mma8452_probe()

2020-07-22T07:22:22+00:00

commit d7369ae1f4d7cffa7574d15e1f787dcca184c49d upstream. The function iio_device_register() was called in mma8452_probe(). But the function iio_device_unregister() was not called after a call of the function mma8452_set_freefall_mode() failed. Thus add the missed function call for one error case. Fixes: 1a965d405fc6 ("drivers:iio:accel:mma8452: added cleanup provision in case of failure.") Signed-off-by: Chuhong Yuan Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: sca3000: Remove an erroneous 'get_device()'

2020-05-27T14:43:11+00:00

commit 928edefbc18cd8433f7df235c6e09a9306e7d580 upstream. This looks really unusual to have a 'get_device()' hidden in a 'dev_err()' call. Remove it. While at it add a missing \n at the end of the message. Fixes: 574fb258d636 ("Staging: IIO: VTI sca3000 series accelerometer driver (spi)") Signed-off-by: Christophe JAILLET Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: fix center temperature of bmc150-accel-core

2019-11-06T11:43:01+00:00

[ Upstream commit 6c59a962e081df6d8fe43325bbfabec57e0d4751 ] The center temperature of the supported devices stored in the constant BMC150_ACCEL_TEMP_CENTER_VAL is not 24 degrees but 23 degrees. It seems that some datasheets were inconsistent on this value leading to the error. For most usecases will only make minor difference so not queued for stable. Signed-off-by: Pascal Bouwmann Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin

io: accel: kxcjk1013: restore the range after resume.

2019-04-27T07:35:36+00:00

commit fe2d3df639a7940a125a33d6460529b9689c5406 upstream. On some laptops, kxcjk1013 is powered off when system enters S3. We need restore the range regiter during resume. Otherwise, the sensor doesn't work properly after S3. Signed-off-by: he, bo Signed-off-by: Chen, Hu Reviewed-by: Hans de Goede Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman