kernel/linux.git/drivers/iio/Makefile, branch v6.6.131

iio: add the IIO backend framework

2024-06-12T09:12:21+00:00

[ Upstream commit 1a97905d3e48ebe79a06d16143fbfa427c56ce5f ] This is a Framework to handle complex IIO aggregate devices. The typical architecture is to have one device as the frontend device which can be "linked" against one or multiple backend devices. All the IIO and userspace interface is expected to be registers/managed by the frontend device which will callback into the backends when needed (to get/set some configuration that it does not directly control). The basic framework interface is pretty simple: - Backends should register themselves with @devm_iio_backend_register() - Frontend devices should get backends with @devm_iio_backend_get() Signed-off-by: Nuno Sa Link: https://lore.kernel.org/r/20240210-iio-backend-v11-5-f5242a5fb42a@analog.com Reviewed-by: Andy Shevchenko Signed-off-by: Jonathan Cameron Stable-dep-of: cf1c833f89e7 ("iio: adc: adi-axi-adc: only error out in major version mismatch") Signed-off-by: Sasha Levin

iio: light: Add gain-time-scale helpers

2023-04-10T11:26:34+00:00

Some light sensors can adjust both the HW-gain and integration time. There are cases where adjusting the integration time has similar impact to the scale of the reported values as gain setting has. IIO users do typically expect to handle scale by a single writable 'scale' entry. Driver should then adjust the gain/time accordingly. It however is difficult for a driver to know whether it should change gain or integration time to meet the requested scale. Usually it is preferred to have longer integration time which usually improves accuracy, but there may be use-cases where long measurement times can be an issue. Thus it can be preferable to allow also changing the integration time - but mitigate the scale impact by also changing the gain underneath. Eg, if integration time change doubles the measured values, the driver can reduce the HW-gain to half. The theory of the computations of gain-time-scale is simple. However, some people (undersigned) got that implemented wrong for more than once. Add some gain-time-scale helpers in order to not dublicate errors in all drivers needing these computations. Signed-off-by: Matti Vaittinen Link: https://lore.kernel.org/r/268d418e7cffcdaa2ece6738478bbc57692c213e.1680263956.git.mazziesaccount@gmail.com Signed-off-by: Jonathan Cameron

iio: add filter subfolder

2021-12-16T17:29:46+00:00

Add filter subfolder for IIO devices that handle filter functionality. Signed-off-by: Antoniu Miclaus Signed-off-by: Jonathan Cameron

iio: add addac subdirectory

2021-12-12T17:09:11+00:00

For IIO devices that expose both ADC and DAC functionality. Signed-off-by: Cosmin Tanislav Link: https://lore.kernel.org/r/20211205114045.173612-2-cosmin.tanislav@analog.com Signed-off-by: Jonathan Cameron

iio:cdc:ad7150: Move driver out of staging.

2021-04-07T07:36:37+00:00

This capacitance to digital converter (CDC) driver is compliant with the IIO ABI. Note, not all features supported (e.g. window event modes) but the driver should be in a useful functional state. The cleanup was done against QEMU emulation of the device rather than actual hardware. Whilst this was a bit of an experiment, it made it easy to confirm that the driver remained in a consistent working state through the various refactors. If it worked in the first place, it should still be working after this cleanup. Given some IIO drivers require expensive hardware setups, (not particularly true with this one) the use of QEMU may provide a viable way forward for providing testing during code changes where previously we'd had to rely on sharp eyes and crossed fingers. Note, no explicit MAINTAINERS entry as it will be covered by the generic catch-alls for ADI and IIO drivers which are sufficient. Signed-off-by: Jonathan Cameron Reviewed-by: Alexandru Ardelean Link: https://lore.kernel.org/r/20210314181511.531414-25-jic23@kernel.org

iio: Add basic unit test for iio_format_value()

2021-03-11T20:47:00+00:00

The IIO core provides a function to do formatting of fixedpoint numbers. In the past there have been some issues with the implementation of the function where for example negative numbers were not handled correctly. Introduce a basic unit test based on kunit that tests the function and ensures that the generated output matches the expected output. This gives us some confidence that future modifications to the function implementation will not break ABI compatibility. To run the unit tests follow the kunit documentation and add CONFIG_IIO=y CONFIG_IIO_TEST_FORMAT=y to the .kunitconfig and run > ./tools/testing/kunit/kunit.py run Configuring KUnit Kernel ... Building KUnit Kernel ... Starting KUnit Kernel ... ============================================================ ======== [PASSED] iio-format ======== [PASSED] iio_test_iio_format_value_integer [PASSED] iio_test_iio_format_value_fixedpoint [PASSED] iio_test_iio_format_value_fractional [PASSED] iio_test_iio_format_value_fractional_log2 [PASSED] iio_test_iio_format_value_multiple ============================================================ Testing complete. 21 tests run. 0 failed. 0 crashed. Elapsed time: 8.242s total, 0.001s configuring, 3.865s building, 0.000s running Signed-off-by: Lars-Peter Clausen Link: https://lore.kernel.org/r/20201215191743.2725-3-lars@metafoo.de Signed-off-by: Jonathan Cameron

iio: position: Add support for Azoteq IQS624/625 angle sensors

2020-03-27T08:25:59+00:00

This patch adds support for the Azoteq IQS624 and IQS625 angular position sensors, capable of reporting the angle of a rotating shaft down to 1 and 10 degrees of accuracy, respectively. This patch also introduces a home for linear and angular position sensors. Unlike resolvers, they are typically contactless and use the Hall effect. Signed-off-by: Jeff LaBundy Reviewed-by: Jonathan Cameron Signed-off-by: Lee Jones

counter: stm32-lptimer: add counter device

2019-04-25T19:33:41+00:00

Add support for new counter device to stm32-lptimer. Signed-off-by: Fabrice Gasnier Reviewed-by: Jonathan Cameron Signed-off-by: William Breathitt Gray Signed-off-by: Greg Kroah-Hartman

staging: iio: ad2s1200: Move driver out of staging

2018-05-20T11:17:48+00:00

Move the iio driver for the ad2s1200 and ad2s1205 resolver-to-digital converter out of staging, into mainline iio subsystems. Signed-off-by: David Veenstra Signed-off-by: Jonathan Cameron

iio: afe: rescale: new driver

2018-04-28T17:03:22+00:00

If an ADC channel measures the midpoint of a voltage divider, the interesting voltage is often the voltage over the full resistance. E.g. if the full voltage is too big for the ADC to handle. Likewise, if an ADC channel measures the voltage across a shunt resistor, with or without amplification, the interesting value is often the current through the resistor. This driver solves these problems by allowing to linearly scale a channel and/or by allowing changes to the type of the channel. Signed-off-by: Peter Rosin Signed-off-by: Jonathan Cameron