kernel/linux.git/drivers/ide, branch v4.14.85

cdrom: do not call check_disk_change() inside cdrom_open()

2018-05-30T05:52:34+00:00

[ Upstream commit 2bbea6e117357d17842114c65e9a9cf2d13ae8a3 ] when mounting an ISO filesystem sometimes (very rarely) the system hangs because of a race condition between two tasks. PID: 6766 TASK: ffff88007b2a6dd0 CPU: 0 COMMAND: "mount" #0 [ffff880078447ae0] __schedule at ffffffff8168d605 #1 [ffff880078447b48] schedule_preempt_disabled at ffffffff8168ed49 #2 [ffff880078447b58] __mutex_lock_slowpath at ffffffff8168c995 #3 [ffff880078447bb8] mutex_lock at ffffffff8168bdef #4 [ffff880078447bd0] sr_block_ioctl at ffffffffa00b6818 [sr_mod] #5 [ffff880078447c10] blkdev_ioctl at ffffffff812fea50 #6 [ffff880078447c70] ioctl_by_bdev at ffffffff8123a8b3 #7 [ffff880078447c90] isofs_fill_super at ffffffffa04fb1e1 [isofs] #8 [ffff880078447da8] mount_bdev at ffffffff81202570 #9 [ffff880078447e18] isofs_mount at ffffffffa04f9828 [isofs] #10 [ffff880078447e28] mount_fs at ffffffff81202d09 #11 [ffff880078447e70] vfs_kern_mount at ffffffff8121ea8f #12 [ffff880078447ea8] do_mount at ffffffff81220fee #13 [ffff880078447f28] sys_mount at ffffffff812218d6 #14 [ffff880078447f80] system_call_fastpath at ffffffff81698c49 RIP: 00007fd9ea914e9a RSP: 00007ffd5d9bf648 RFLAGS: 00010246 RAX: 00000000000000a5 RBX: ffffffff81698c49 RCX: 0000000000000010 RDX: 00007fd9ec2bc210 RSI: 00007fd9ec2bc290 RDI: 00007fd9ec2bcf30 RBP: 0000000000000000 R8: 0000000000000000 R9: 0000000000000010 R10: 00000000c0ed0001 R11: 0000000000000206 R12: 00007fd9ec2bc040 R13: 00007fd9eb6b2380 R14: 00007fd9ec2bc210 R15: 00007fd9ec2bcf30 ORIG_RAX: 00000000000000a5 CS: 0033 SS: 002b This task was trying to mount the cdrom. It allocated and configured a super_block struct and owned the write-lock for the super_block->s_umount rwsem. While exclusively owning the s_umount lock, it called sr_block_ioctl and waited to acquire the global sr_mutex lock. PID: 6785 TASK: ffff880078720fb0 CPU: 0 COMMAND: "systemd-udevd" #0 [ffff880078417898] __schedule at ffffffff8168d605 #1 [ffff880078417900] schedule at ffffffff8168dc59 #2 [ffff880078417910] rwsem_down_read_failed at ffffffff8168f605 #3 [ffff880078417980] call_rwsem_down_read_failed at ffffffff81328838 #4 [ffff8800784179d0] down_read at ffffffff8168cde0 #5 [ffff8800784179e8] get_super at ffffffff81201cc7 #6 [ffff880078417a10] __invalidate_device at ffffffff8123a8de #7 [ffff880078417a40] flush_disk at ffffffff8123a94b #8 [ffff880078417a88] check_disk_change at ffffffff8123ab50 #9 [ffff880078417ab0] cdrom_open at ffffffffa00a29e1 [cdrom] #10 [ffff880078417b68] sr_block_open at ffffffffa00b6f9b [sr_mod] #11 [ffff880078417b98] __blkdev_get at ffffffff8123ba86 #12 [ffff880078417bf0] blkdev_get at ffffffff8123bd65 #13 [ffff880078417c78] blkdev_open at ffffffff8123bf9b #14 [ffff880078417c90] do_dentry_open at ffffffff811fc7f7 #15 [ffff880078417cd8] vfs_open at ffffffff811fc9cf #16 [ffff880078417d00] do_last at ffffffff8120d53d #17 [ffff880078417db0] path_openat at ffffffff8120e6b2 #18 [ffff880078417e48] do_filp_open at ffffffff8121082b #19 [ffff880078417f18] do_sys_open at ffffffff811fdd33 #20 [ffff880078417f70] sys_open at ffffffff811fde4e #21 [ffff880078417f80] system_call_fastpath at ffffffff81698c49 RIP: 00007f29438b0c20 RSP: 00007ffc76624b78 RFLAGS: 00010246 RAX: 0000000000000002 RBX: ffffffff81698c49 RCX: 0000000000000000 RDX: 00007f2944a5fa70 RSI: 00000000000a0800 RDI: 00007f2944a5fa70 RBP: 00007f2944a5f540 R8: 0000000000000000 R9: 0000000000000020 R10: 00007f2943614c40 R11: 0000000000000246 R12: ffffffff811fde4e R13: ffff880078417f78 R14: 000000000000000c R15: 00007f2944a4b010 ORIG_RAX: 0000000000000002 CS: 0033 SS: 002b This task tried to open the cdrom device, the sr_block_open function acquired the global sr_mutex lock. The call to check_disk_change() then saw an event flag indicating a possible media change and tried to flush any cached data for the device. As part of the flush, it tried to acquire the super_block->s_umount lock associated with the cdrom device. This was the same super_block as created and locked by the previous task. The first task acquires the s_umount lock and then the sr_mutex_lock; the second task acquires the sr_mutex_lock and then the s_umount lock. This patch fixes the issue by moving check_disk_change() out of cdrom_open() and let the caller take care of it. Signed-off-by: Maurizio Lombardi Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

ide: ide-atapi: fix compile error with defining macro DEBUG

2017-12-17T14:08:00+00:00

[ Upstream commit 8dc7a31fbce5e2dbbacd83d910da37105181b054 ] Compile ide-atapi failed with defining macro "DEBUG" ... |drivers/ide/ide-atapi.c:285:52: error: 'struct request' has no member named 'cmd'; did you mean 'csd'? | debug_log("%s: rq->cmd[0]: 0x%x\n", __func__, rq->cmd[0]); ... Since we split the scsi_request out of struct request, it missed do the same thing on debug_log Fixes: 82ed4db499b8 ("block: split scsi_request out of struct request") Signed-off-by: Hongxu Jia Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

drivers/ide-cd: Handle missing driver data during status check gracefully

2017-11-07T17:12:04+00:00

The 0day bot reports the below failure which happens occasionally, with their randconfig testing (once every ~100 boots). The Code points at the private pointer ->driver_data being NULL, which hints at a race of sorts where the private driver_data descriptor has disappeared by the time we get to run the workqueue. So let's check that pointer before we continue with issuing the command to the drive. This fix is of the brown paper bag nature but considering that IDE is long deprecated, let's do that so that random testing which happens to enable CONFIG_IDE during randconfig builds, doesn't fail because of this. Besides, failing the TEST_UNIT_READY command because the drive private data is gone is something which we could simply do anyway, to denote that there was a problem communicating with the device. BUG: unable to handle kernel NULL pointer dereference at 000001c0 IP: cdrom_check_status *pde = 00000000 Oops: 0000 [#1] SMP CPU: 1 PID: 155 Comm: kworker/1:2 Not tainted 4.14.0-rc8 #127 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 Workqueue: events_freezable_power_ disk_events_workfn task: 4fe90980 task.stack: 507ac000 EIP: cdrom_check_status+0x2c/0x90 EFLAGS: 00210246 CPU: 1 EAX: 00000000 EBX: 4fefec00 ECX: 00000000 EDX: 00000000 ESI: 00000003 EDI: ffffffff EBP: 467a9340 ESP: 507aded0 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 CR0: 80050033 CR2: 000001c0 CR3: 06e0f000 CR4: 00000690 Call Trace: ? ide_cdrom_check_events_real ? cdrom_check_events ? disk_check_events ? process_one_work ? process_one_work ? worker_thread ? kthread ? process_one_work ? __kthread_create_on_node ? ret_from_fork Code: 53 83 ec 14 89 c3 89 d1 be 03 00 00 00 65 a1 14 00 00 00 89 44 24 10 31 c0 8b 43 18 c7 44 24 04 00 00 00 00 c7 04 24 00 00 00 00 <8a> 80 c0 01 00 00 c7 44 24 08 00 00 00 00 83 e0 03 c7 44 24 0c EIP: cdrom_check_status+0x2c/0x90 SS:ESP: 0068:507aded0 CR2: 00000000000001c0 ---[ end trace 2410e586dd8f88b2 ]--- Reported-and-tested-by: Fengguang Wu Signed-off-by: Borislav Petkov Cc: "David S. Miller" Cc: Jens Axboe Cc: Bart Van Assche Signed-off-by: Linus Torvalds

Merge tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2017-11-02T17:04:46+00:00

Pull initial SPDX identifiers from Greg KH: "License cleanup: add SPDX license identifiers to some files Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman " * tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: License cleanup: add SPDX license identifier to uapi header files with a license License cleanup: add SPDX license identifier to uapi header files with no license License cleanup: add SPDX GPL-2.0 license identifier to files with no license

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

ide:ide-cd: fix kernel panic resulting from missing scsi_req_init

2017-11-01T14:21:58+00:00

Since we split the scsi_request out of struct request, while the standard prep_rq_fn builds 10 byte cmds, it missed to invoke scsi_req_init() to initialize certain fields of a scsi_request structure (.__cmd[], .cmd, .cmd_len and .sense_len but no other members of struct scsi_request). An example panic on virtual machines (qemu/virtualbox) to boot from IDE cdrom: ... [ 8.754381] Call Trace: [ 8.755419] blk_peek_request+0x182/0x2e0 [ 8.755863] blk_fetch_request+0x1c/0x40 [ 8.756148] ? ktime_get+0x40/0xa0 [ 8.756385] do_ide_request+0x37d/0x660 [ 8.756704] ? cfq_group_service_tree_add+0x98/0xc0 [ 8.757011] ? cfq_service_tree_add+0x1e5/0x2c0 [ 8.757313] ? ktime_get+0x40/0xa0 [ 8.757544] __blk_run_queue+0x3d/0x60 [ 8.757837] queue_unplugged+0x2f/0xc0 [ 8.758088] blk_flush_plug_list+0x1f4/0x240 [ 8.758362] blk_finish_plug+0x2c/0x40 ... [ 8.770906] RIP: ide_cdrom_prep_fn+0x63/0x180 RSP: ffff92aec018bae8 [ 8.772329] ---[ end trace 6408481e551a85c9 ]--- ... Fixes: 82ed4db499b8 ("block: split scsi_request out of struct request") Signed-off-by: Hongxu Jia Signed-off-by: Jens Axboe

ide: fix IRQ assignment for PCI bus order probing

2017-10-03T19:03:31+00:00

We used to assign IRQs for all devices at boot-time, before any drivers claimed devices. The following commits: 30fdfb929e82 ("PCI: Add a call to pci_assign_irq() in pci_device_probe()") 0e4c2eeb758a ("alpha/PCI: Replace pci_fixup_irqs() call with host bridge IRQ mapping hooks") changed this so we now call pci_assign_irq() from pci_device_probe() when we call a driver's probe method. The ide_scan_pcibus() path (enabled by CONFIG_IDEPCI_PCIBUS_ORDER) bypasses pci_device_probe() so it can guarantee devices are claimed in order of PCI bus address. It calls the driver's probe method directly, so it misses the pci_assign_irq() call (and other PCI initialization functions), which causes failures like this: ide0: disabled, no IRQ ide0: failed to initialize IDE interface ide0: disabling port cmd64x 0000:00:02.0: IDE controller (0x1095:0x0646 rev 0x07) CMD64x_IDE 0000:00:02.0: BAR 0: can't reserve [io 0x8050-0x8057] cmd64x 0000:00:02.0: can't reserve resources CMD64x_IDE: probe of 0000:00:02.0 failed with error -16 ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x94/0xd0 sysfs: cannot create duplicate filename '/class/ide_port/ide0' ... Trace: [] sysfs_warn_dup+0x94/0xd0 [] warn_slowpath_fmt+0x58/0x70 [] sysfs_warn_dup+0x94/0xd0 [] kernfs_path_from_node+0x30/0x60 [] kernfs_put+0x16c/0x2c0 [] kernfs_put+0x16c/0x2c0 [] sysfs_do_create_link_sd.isra.2+0x100/0x120 [] device_add+0x2a4/0x7c0 [] device_create_groups_vargs+0x14c/0x170 [] device_create_groups_vargs+0x98/0x170 [] device_create+0x50/0x70 [] ide_host_register+0x48c/0xa00 [] ide_host_register+0x450/0xa00 [] device_register+0x20/0x50 [] ide_host_register+0x450/0xa00 [] ide_host_add+0x64/0xe0 [] kobject_uevent_env+0x16c/0x710 [] do_one_initcall+0x68/0x260 [] kernel_init+0x1c/0x1a0 ... ---[ end trace 24a70433c3e4d374 ]--- ide0: disabling port Fix the IRQ allocation issue by calling pci_assign_irq() from ide_scan_pcidev() before probing the IDE PCI drivers, so that IRQs for a given PCI device are allocated for the IDE PCI drivers to use them for device configuration. Fixes: 30fdfb929e82 ("PCI: Add a call to pci_assign_irq() in pci_device_probe()") Fixes: 0e4c2eeb758a ("alpha/PCI: Replace pci_fixup_irqs() call with host bridge IRQ mapping hooks") Link: http://lkml.kernel.org/r/32ec730f-c1b0-5584-cd35-f8a809122b96@roeck-us.net Reported-by: Guenter Roeck Tested-by: Guenter Roeck Signed-off-by: Lorenzo Pieralisi [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas Reviewed-by: Bartlomiej Zolnierkiewicz Acked-by: David S. Miller Cc: Richard Henderson Cc: Ivan Kokshaysky Cc: Matt Turner

ide: pci: free PCI BARs on initialization failure

2017-10-03T19:02:57+00:00

Recent pci_assign_irq() changes uncovered a problem with missing freeing of PCI BARs on PCI IDE host initialization failure: ide0: disabled, no IRQ ide0: failed to initialize IDE interface ide0: disabling port cmd64x 0000:00:02.0: IDE controller (0x1095:0x0646 rev 0x07) CMD64x_IDE 0000:00:02.0: BAR 0: can't reserve [io 0x8050-0x8057] cmd64x 0000:00:02.0: can't reserve resources CMD64x_IDE: probe of 0000:00:02.0 failed with error -16 Fix the problem by adding missing freeing of PCI BARs to ide_setup_pci_controller() and ide_pci_init_two(). Fixes: 30fdfb929e82 ("PCI: Add a call to pci_assign_irq() in pci_device_probe()") Fixes: 0e4c2eeb758a ("alpha/PCI: Replace pci_fixup_irqs() call with host bridge IRQ mapping hooks") Link: http://lkml.kernel.org/r/32ec730f-c1b0-5584-cd35-f8a809122b96@roeck-us.net Reported-by: Guenter Roeck Tested-by: Guenter Roeck Signed-off-by: Bartlomiej Zolnierkiewicz [bhelgaas: add Fixes:] Signed-off-by: Bjorn Helgaas Cc: Richard Henderson Cc: Ivan Kokshaysky Cc: Matt Turner

ide: free hwif->portdev on hwif_init() failure

2017-10-03T18:36:17+00:00

Recent pci_assign_irq() changes uncovered a problem with missing freeing of ide_port class instance on hwif_init() failure in ide_host_register(): ide0: disabled, no IRQ ide0: failed to initialize IDE interface ide0: disabling port cmd64x 0000:00:02.0: IDE controller (0x1095:0x0646 rev 0x07) CMD64x_IDE 0000:00:02.0: BAR 0: can't reserve [io 0x8050-0x8057] cmd64x 0000:00:02.0: can't reserve resources CMD64x_IDE: probe of 0000:00:02.0 failed with error -16 ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x94/0xd0 sysfs: cannot create duplicate filename '/class/ide_port/ide0' ... Trace: [] __warn+0x160/0x190 [] sysfs_warn_dup+0x94/0xd0 [] warn_slowpath_fmt+0x58/0x70 [] sysfs_warn_dup+0x94/0xd0 [] kernfs_path_from_node+0x30/0x60 [] kernfs_put+0x16c/0x2c0 [] kernfs_put+0x16c/0x2c0 [] sysfs_do_create_link_sd.isra.2+0x100/0x120 [] device_add+0x2a4/0x7c0 [] device_create_groups_vargs+0x14c/0x170 [] device_create_groups_vargs+0x98/0x170 [] device_create+0x50/0x70 [] ide_host_register+0x48c/0xa00 [] ide_host_register+0x450/0xa00 [] device_register+0x20/0x50 [] ide_host_register+0x450/0xa00 [] ide_host_add+0x64/0xe0 [] kobject_uevent_env+0x16c/0x710 [] do_one_initcall+0x68/0x260 [] kernel_init+0x1c/0x1a0 [] kernel_init+0x0/0x1a0 [] ret_from_kernel_thread+0x18/0x20 [] kernel_init+0x0/0x1a0 ---[ end trace 24a70433c3e4d374 ]--- ide0: disabling port Fix the problem by adding missing code to ide_host_register(). Fixes: 30fdfb929e82 ("PCI: Add a call to pci_assign_irq() in pci_device_probe()") Fixes: 0e4c2eeb758a ("alpha/PCI: Replace pci_fixup_irqs() call with host bridge IRQ mapping hooks") Link: http://lkml.kernel.org/r/32ec730f-c1b0-5584-cd35-f8a809122b96@roeck-us.net Reported-by: Guenter Roeck Tested-by: Guenter Roeck Signed-off-by: Bartlomiej Zolnierkiewicz [bhelgaas: add Fixes:] Signed-off-by: Bjorn Helgaas Cc: Richard Henderson Cc: Ivan Kokshaysky Cc: Matt Turner

Merge branch 'for-4.14/block' of git://git.kernel.dk/linux-block

2017-09-07T18:59:42+00:00

Pull block layer updates from Jens Axboe: "This is the first pull request for 4.14, containing most of the code changes. It's a quiet series this round, which I think we needed after the churn of the last few series. This contains: - Fix for a registration race in loop, from Anton Volkov. - Overflow complaint fix from Arnd for DAC960. - Series of drbd changes from the usual suspects. - Conversion of the stec/skd driver to blk-mq. From Bart. - A few BFQ improvements/fixes from Paolo. - CFQ improvement from Ritesh, allowing idling for group idle. - A few fixes found by Dan's smatch, courtesy of Dan. - A warning fixup for a race between changing the IO scheduler and device remova. From David Jeffery. - A few nbd fixes from Josef. - Support for cgroup info in blktrace, from Shaohua. - Also from Shaohua, new features in the null_blk driver to allow it to actually hold data, among other things. - Various corner cases and error handling fixes from Weiping Zhang. - Improvements to the IO stats tracking for blk-mq from me. Can drastically improve performance for fast devices and/or big machines. - Series from Christoph removing bi_bdev as being needed for IO submission, in preparation for nvme multipathing code. - Series from Bart, including various cleanups and fixes for switch fall through case complaints" * 'for-4.14/block' of git://git.kernel.dk/linux-block: (162 commits) kernfs: checking for IS_ERR() instead of NULL drbd: remove BIOSET_NEED_RESCUER flag from drbd_{md_,}io_bio_set drbd: Fix allyesconfig build, fix recent commit drbd: switch from kmalloc() to kmalloc_array() drbd: abort drbd_start_resync if there is no connection drbd: move global variables to drbd namespace and make some static drbd: rename "usermode_helper" to "drbd_usermode_helper" drbd: fix race between handshake and admin disconnect/down drbd: fix potential deadlock when trying to detach during handshake drbd: A single dot should be put into a sequence. drbd: fix rmmod cleanup, remove _all_ debugfs entries drbd: Use setup_timer() instead of init_timer() to simplify the code. drbd: fix potential get_ldev/put_ldev refcount imbalance during attach drbd: new disk-option disable-write-same drbd: Fix resource role for newly created resources in events2 drbd: mark symbols static where possible drbd: Send P_NEG_ACK upon write error in protocol != C drbd: add explicit plugging when submitting batches drbd: change list_for_each_safe to while(list_first_entry_or_null) drbd: introduce drbd_recv_header_maybe_unplug ...