kernel/linux.git/drivers/ide/ide.c, branch linux-2.6.22.y

Resume from RAM on HPC nx6325 broken

2007-06-16T00:24:43+00:00

generic_ide_resume() should check if dev->driver is not NULL before applying to_ide_driver() to it. Fix that. Signed-off-by: Rafael J. Wysocki Signed-off-by: Andrew Morton Signed-off-by: Bartlomiej Zolnierkiewicz

ide: HPA detect from resume

2007-06-08T13:14:30+00:00

Currently when system which have HPA require HPA to be detected and disabled upon resume from RAM or disk. The current IDE drivers do not do this nor does libata (obviously it since it doesn't support HPA yet). I have implemented this into the current IDE drivers and it has been tested by many others since 7/15/2006 in bug number 6840: http://bugzilla.kernel.org/show_bug.cgi?id=6840 and it has been confirmed to work fine with no problems. bart: added drv != NULL check to generic_ide_suspend() From: Lee Trager Signed-off-by: Bartlomiej Zolnierkiewicz

ide: always disable DMA before tuning it

2007-05-15T22:51:43+00:00

ide_start_power_step() and set_using_dma() were missing ->dma_off_quietly call (comment in probe_hwif() states that DMA should be always cleared before tuning is attempted). Fix it. Signed-off-by: Bartlomiej Zolnierkiewicz

ide: legacy PCI bus order probing fixes

2007-05-09T22:01:11+00:00

IDE PCI host drivers should register themselves with IDE core only when IDE driver is built-in, otherwise (IDE driver is modular and thus IDE PCI host drivers are also modular) the code has no effect and just complicates the probing. Fix it by adding new config option CONFIG_IDEPCI_PCIBUS (defined only when needed and invisible to the user) and covering by #ifdef/#endif the code in question. It turned out that "ide=reverse" was silently accepted but did nothing in case when IDE driver was modular, this is fixed now. Signed-off-by: Bartlomiej Zolnierkiewicz

ide: add ide_proc_register_port()

2007-05-09T22:01:11+00:00

* create_proc_ide_interfaces() tries to add /proc entries for every probed and initialized IDE port, replace it by ide_proc_register_port() which does it only for the given port (also rename destroy_proc_ide_interface() to ide_proc_unregister_port() for consistency) * convert {create,destroy}_proc_ide_interface[s]() users to use new functions * pmac driver depended on proc_ide_create() to add /proc port entries, fix it * au1xxx-ide, swarm and cs5520 drivers depended indirectly on ide-generic driver (CONFIG_IDE_GENERIC=y) to add port /proc entries, fix them * there is now no need to add /proc entries for IDE ports in proc_ide_create() so don't do it * proc_ide_create() needs now to be called before drivers are probed - fix it, while at it make proc_ide_create() create /proc "ide" directory Signed-off-by: Bartlomiej Zolnierkiewicz

ide: add "initializing" argument to ide_register_hw()

2007-05-09T22:01:10+00:00

Add "initializing" argument to ide_register_hw() and use it instead of ide.c wide variable of the same name. Update all users of ide_register_hw() accordingly. Signed-off-by: Bartlomiej Zolnierkiewicz

ide: move IDE settings handling to ide-proc.c

2007-05-09T22:01:10+00:00

* move __ide_add_setting() ide_add_setting() __ide_remove_setting() auto_remove_settings() ide_find_setting_by_name() ide_read_setting() ide_write_setting() set_xfer_rate() ide_add_generic_settings() ide_register_subdriver() ide_unregister_subdriver() from ide.c to ide-proc.c * set_{io_32bit,pio_mode,using_dma}() cannot be marked static now, fix it * rename ide_[un]register_subdriver() to ide_proc_[un]register_driver(), update device drivers to use new names * add CONFIG_IDE_PROC_FS=n versions of ide_proc_[un]register_driver() and ide_add_generic_settings() * make ide_find_setting_by_name(), ide_{read,write}_setting() and ide_{add,remove}_proc_entries() static * cover IDE settings code in device drivers with CONFIG_IDE_PROC_FS #ifdef, also while at it cover with CONFIG_IDE_PROC_FS #ifdef ide_driver_t.proc * remove bogus comment from ide.h * cover with CONFIG_IDE_PROC_FS #ifdef .proc and .settings in ide_drive_t Besides saner code this patch results in the IDE core smaller by ~2 kB (on x86-32) and IDE disk driver by ~1 kB (ditto) when CONFIG_IDE_PROC_FS=n. Signed-off-by: Bartlomiej Zolnierkiewicz

ide: split off ioctl handling from IDE settings (v2)

2007-05-09T22:01:10+00:00

* do write permission and min/max checks in ide_procset_t functions * ide-disk.c: drive->id is always available so cleanup "multcount" setting accordingly * ide-disk.c: "address" setting was incorrectly defined as type TYPE_INTA, fix it by using type TYPE_BYTE and updating ide_drive_t->adressing field, the bug didn't trigger because this IDE setting uses custom ->set function * ide.c: add set_ksettings() for handling HDIO_SET_KEEPSETTINGS ioctl * ide.c: add set_unmaskirq() for handling HDIO_SET_UNMASKINTR ioctl * handle ioctls directly in generic_ide_ioclt() and idedisk_ioctl() instead of using IDE settings to deal with them * remove no longer needed ide_find_setting_by_ioctl() and {read,write}_ioctl fields from ide_settings_t, also remove now unused TYPE_INTA handling v2: * add missing EXPORT_SYMBOL_GPL(ide_setting_sem) needed now for ide-disk Signed-off-by: Bartlomiej Zolnierkiewicz

ide: make /proc/ide/ optional

2007-05-09T22:01:09+00:00

All important information/features should be already available through sysfs and ioctl interfaces. Add CONFIG_IDE_PROC_FS (CONFIG_SCSI_PROC_FS rip-off) config option, disabling it makes IDE driver ~5 kB smaller (on x86-32). While at it add CONFIG_PROC_FS=n versions of proc_ide_{create,destroy}() and remove no longer needed #ifdefs. Signed-off-by: Bartlomiej Zolnierkiewicz

ide: rework the code for selecting the best DMA transfer mode (v3)

2007-05-09T22:01:08+00:00

Depends on the "ide: fix UDMA/MWDMA/SWDMA masks" patch. * add ide_hwif_t.udma_filter hook for filtering UDMA mask (use it in alim15x3, hpt366, siimage and serverworks drivers) * add ide_max_dma_mode() for finding best DMA mode for the device (loosely based on some older libata-core.c code) * convert ide_dma_speed() users to use ide_max_dma_mode() * make ide_rate_filter() take "ide_drive_t *drive" as an argument instead of "u8 mode" and teach it to how to use UDMA mask to do filtering * use ide_rate_filter() in hpt366 driver * remove no longer needed ide_dma_speed() and *_ratemask() * unexport eighty_ninty_three() v2: * rename ->filter_udma_mask to ->udma_filter [ Suggested by Sergei Shtylyov . ] v3: * updated for scc_pata driver (fixes XFER_UDMA_6 filtering for user-space originated transfer mode change requests when 100MHz clock is used) Signed-off-by: Bartlomiej Zolnierkiewicz