kernel/linux.git/drivers/i3c, branch v6.12.103

i3c: master: Prevent reuse of dynamic address on device add failure

2026-07-24T14:11:10+00:00

[ Upstream commit b3ba8383da4d0cff15810e32ea785eceb0a80813 ] i3c_master_add_i3c_dev_locked() is called after a device has already been assigned a dynamic address. If the function fails, the address remains marked as free and may be reallocated to another device, leading to address conflicts on the bus. Ensure the address is not marked as free on failure, by updating the address slot state to prevent the address from being re-used. Emit an error message to inform of the failure. Opportunistically remove the !master check because it is impossible. Note, directly resetting the device's dynamic address is no longer an option, since Direct RSTDAA was deprecated from I3C starting from version 1.1 and v1.1 (or later) target devices are meant to NACK it. Fixes: 3a379bbcea0af ("i3c: Add core I3C infrastructure") Signed-off-by: Adrian Hunter Reviewed-by: Frank Li Link: https://patch.msgid.link/20260612080107.11606-4-adrian.hunter@intel.com Signed-off-by: Alexandre Belloni Signed-off-by: Sasha Levin

i3c: master: Make hot-join workqueue freezable to block hot-join during suspend

2026-07-24T14:11:10+00:00

[ Upstream commit 527756cb9ebb277dca12fff00af9fbb3b9ec8cc8 ] The I3C master workqueue (master->wq) is used to defer work that needs thread context and the bus maintenance lock, most notably Hot Join processing (which calls i3c_master_do_daa() to assign dynamic addresses to newly joined devices). Currently the workqueue keeps running across system suspend, which can race with the suspend path: - do_daa() may execute after the controller has been suspended, issuing bus transactions on a powered-down or otherwise unusable controller. - New I3C devices can be enumerated and added to the bus mid-suspend, registering driver model objects at a point where the I3C subsystem and its consumers are not prepared to handle them. Mark the workqueue WQ_FREEZABLE so its workers are frozen for the duration of system suspend/hibernate and resumed afterwards. This naturally defers any pending or newly queued Hot Join work until the system (and the controller) is fully resumed, closing both races without adding explicit suspend/resume synchronization in the master drivers. Update the kerneldoc for struct i3c_master_controller::wq to reflect that the workqueue is freezable. Fixes: 3a379bbcea0af ("i3c: Add core I3C infrastructure") Signed-off-by: Adrian Hunter Reviewed-by: Frank Li Link: https://patch.msgid.link/20260608054312.10604-2-adrian.hunter@intel.com Signed-off-by: Alexandre Belloni Signed-off-by: Sasha Levin

i3c: master: add WQ_PERCPU to alloc_workqueue users

2026-07-24T14:11:09+00:00

[ Upstream commit de53ad6ca49e5d73bba72d24b49ec5d40f33ee01 ] Currently if a user enqueues a work item using schedule_delayed_work() the used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to schedule_work() that is using system_wq and queue_work(), that makes use again of WORK_CPU_UNBOUND. This lack of consistency cannot be addressed without refactoring the API. alloc_workqueue() treats all queues as per-CPU by default, while unbound workqueues must opt-in via WQ_UNBOUND. This default is suboptimal: most workloads benefit from unbound queues, allowing the scheduler to place worker threads where they’re needed and reducing noise when CPUs are isolated. This continues the effort to refactor workqueue APIs, which began with the introduction of new workqueues and a new alloc_workqueue flag in: commit 128ea9f6ccfb ("workqueue: Add system_percpu_wq and system_dfl_wq") commit 930c2ea566af ("workqueue: Add new WQ_PERCPU flag") This change adds a new WQ_PERCPU flag to explicitly request alloc_workqueue() to be per-cpu when WQ_UNBOUND has not been specified. With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND), any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND must now use WQ_PERCPU. Once migration is complete, WQ_UNBOUND can be removed and unbound will become the implicit default. Suggested-by: Tejun Heo Signed-off-by: Marco Crivellari Link: https://patch.msgid.link/20251107132949.184944-1-marco.crivellari@suse.com Signed-off-by: Alexandre Belloni Stable-dep-of: 527756cb9ebb ("i3c: master: Make hot-join workqueue freezable to block hot-join during suspend") Signed-off-by: Sasha Levin

i3c: mipi-i3c-hci: fix IBI payload length calculation for final status

2026-05-23T11:04:44+00:00

[ Upstream commit d35a6db887eeae7c57b719521e39d64f929c6dc3 ] In DMA mode, the IBI status descriptor encodes the payload using CHUNKS (number of chunks) and DATA_LENGTH (valid bytes in the last chunk). All preceding chunks are implicitly full-sized. The current code accumulates full chunk sizes for non-final status descriptors, but for the final status descriptor it only adds DATA_LENGTH. This ignores the contribution of the preceding full chunks described by the same final status entry. As a result, the computed IBI payload length is truncated whenever the final status spans multiple chunks. For example, with a chunk size of 4 bytes, CHUNKS=2 and DATA_LENGTH=1 should result in a total payload size of 5 bytes, but the current code reports only 1 byte. Fix the calculation by adding the size of (CHUNKS - 1) full chunks plus DATA_LENGTH for the last chunk. Fixes: 9ad9a52cce28 ("i3c/master: introduce the mipi-i3c-hci driver") Signed-off-by: Billy Tsai Reviewed-by: Frank Li Link: https://patch.msgid.link/20260407-i3c-hci-dma-v2-1-a583187b9d22@aspeedtech.com Signed-off-by: Alexandre Belloni Signed-off-by: Sasha Levin

i3c: dw: Fix memory leak in dw_i3c_master_i3c_xfers()

2026-05-23T11:04:44+00:00

[ Upstream commit 256cc1f1305a8e5dcadf8ca208d04a3acadd26f1 ] The dw_i3c_master_i3c_xfers() function allocates memory for the xfer structure using dw_i3c_master_alloc_xfer(). If pm_runtime_resume_and_get() fails, the function returns without freeing the allocated xfer, resulting in a memory leak. Since dw_i3c_master_free_xfer() is a thin wrapper around kfree(), use the __free(kfree) cleanup attribute to handle the free automatically on all exit paths. Fixes: 62fe9d06f570 ("i3c: dw: Add power management support") Signed-off-by: Felix Gu Reviewed-by: Frank Li Link: https://patch.msgid.link/20260404-dw-i3c-2-v3-1-8f7d146549c1@gmail.com Signed-off-by: Alexandre Belloni Signed-off-by: Sasha Levin

i3c: master: dw-i3c: Fix missing reset assertion in remove() callback

2026-05-23T11:04:44+00:00

[ Upstream commit bef1eef667186cedb0bc6d152464acb3c97d5f72 ] The reset line acquired during probe is currently left deasserted when the driver is unbound. Switch to devm_reset_control_get_optional_exclusive_deasserted() to ensure the reset is automatically re-asserted by the devres core when the driver is removed. Fixes: 62fe9d06f570 ("i3c: dw: Add power management support") Reviewed-by: Philipp Zabel Signed-off-by: Felix Gu Reviewed-by: Frank Li Link: https://patch.msgid.link/20260320-dw-i3c-v3-1-477040c2e3f5@gmail.com Signed-off-by: Alexandre Belloni Signed-off-by: Sasha Levin

i3c: master: dw-i3c: Fix missing of_node for virtual I2C adapter

2026-04-02T11:09:30+00:00

[ Upstream commit f26ecaa0f0abfe5db173416214098a00d3b7db79 ] The DesignWare I3C master driver creates a virtual I2C adapter to provide backward compatibility with I2C devices. However, the current implementation does not associate this virtual adapter with any Device Tree node. Propagate the of_node from the I3C master platform device to the virtual I2C adapter's device structure. This ensures that standard I2C aliases are correctly resolved and bus numbering remains consistent. Signed-off-by: Peter Yin Reviewed-by: Frank Li Link: https://patch.msgid.link/20260302075645.1492766-1-peteryin.openbmc@gmail.com Signed-off-by: Alexandre Belloni Signed-off-by: Sasha Levin

i3c: mipi-i3c-hci: Add missing TID field to no-op command descriptor

2026-03-25T10:08:40+00:00

commit ec3cfd835f7c4bbd23bc9ad909d2fdc772a578bb upstream. The internal control command descriptor used for no-op commands includes a Transaction ID (TID) field, but the no-op command constructed in hci_dma_dequeue_xfer() omitted it. As a result, the hardware receives a no-op descriptor without the expected TID. This bug has gone unnoticed because the TID is currently not validated in the no-op completion path, but the descriptor format requires it to be present. Add the missing TID field when generating a no-op descriptor so that its layout matches the defined command structure. Fixes: 9ad9a52cce282 ("i3c/master: introduce the mipi-i3c-hci driver") Cc: stable@vger.kernel.org Signed-off-by: Adrian Hunter Reviewed-by: Frank Li Link: https://patch.msgid.link/20260306072451.11131-10-adrian.hunter@intel.com Signed-off-by: Alexandre Belloni Signed-off-by: Greg Kroah-Hartman

i3c: mipi-i3c-hci: Restart DMA ring correctly after dequeue abort

2026-03-25T10:08:39+00:00

commit b6d586431ae20d5157ee468d0ef62ad26798ef13 upstream. The DMA dequeue path attempts to restart the ring after aborting an in-flight transfer, but the current sequence is incomplete. The controller must be brought out of the aborted state and the ring control registers must be programmed in the correct order: first clearing ABORT, then re-enabling the ring and asserting RUN_STOP to resume operation. Add the missing controller resume step and update the ring control writes so that the ring is restarted using the proper sequence. Fixes: 9ad9a52cce282 ("i3c/master: introduce the mipi-i3c-hci driver") Cc: stable@vger.kernel.org Signed-off-by: Adrian Hunter Reviewed-by: Frank Li Link: https://patch.msgid.link/20260306072451.11131-11-adrian.hunter@intel.com Signed-off-by: Alexandre Belloni Signed-off-by: Greg Kroah-Hartman

i3c: mipi-i3c-hci: Use ETIMEDOUT instead of ETIME for timeout errors

2026-03-25T10:08:39+00:00

commit 4167b8914463132654e01e16259847d097f8a7f7 upstream. The MIPI I3C HCI driver currently returns -ETIME for various timeout conditions, while other I3C master drivers consistently use -ETIMEDOUT for the same class of errors. Align the HCI driver with the rest of the subsystem by replacing all uses of -ETIME with -ETIMEDOUT. Fixes: 9ad9a52cce282 ("i3c/master: introduce the mipi-i3c-hci driver") Cc: stable@vger.kernel.org Signed-off-by: Adrian Hunter Reviewed-by: Frank Li Link: https://patch.msgid.link/20260306072451.11131-2-adrian.hunter@intel.com Signed-off-by: Alexandre Belloni Signed-off-by: Greg Kroah-Hartman