kernel/linux.git/drivers/i3c, branch v6.1.87

i3c: master: cdns: Update maximum prescaler value for i2c clock

2024-02-05T20:12:58+00:00

[ Upstream commit 374c13f9080a1b9835a5ed3e7bea93cf8e2dc262 ] As per the Cadence IP document fixed the I2C clock divider value limit from 16 bits instead of 10 bits. Without this change setting up the I2C clock to low frequencies will not work as the prescaler value might be greater than 10 bit number. I3C clock divider value is 10 bits only. Updating the macro names for both. Signed-off-by: Harshit Shah Link: https://lore.kernel.org/r/1703927483-28682-1-git-send-email-harshitshah.opendev@gmail.com Signed-off-by: Alexandre Belloni Signed-off-by: Sasha Levin

i3c: master: svc: fix random hot join failure since timeout error

2023-11-28T17:07:17+00:00

[ Upstream commit 9aaeef113c55248ecf3ab941c2e4460aaa8b8b9a ] master side report: silvaco-i3c-master 44330000.i3c-master: Error condition: MSTATUS 0x020090c7, MERRWARN 0x00100000 BIT 20: TIMEOUT error The module has stalled too long in a frame. This happens when: - The TX FIFO or RX FIFO is not handled and the bus is stuck in the middle of a message, - No STOP was issued and between messages, - IBI manual is used and no decision was made. The maximum stall period is 100 μs. This can be considered as being just a warning as the system IRQ latency can easily be greater than 100us. Fixes: dd3c52846d59 ("i3c: master: svc: Add Silvaco I3C master driver") Cc: Signed-off-by: Frank Li Reviewed-by: Miquel Raynal Link: https://lore.kernel.org/r/20231023161658.3890811-7-Frank.Li@nxp.com Signed-off-by: Alexandre Belloni Signed-off-by: Sasha Levin

i3c: master: svc: add NACK check after start byte sent

2023-11-28T17:07:17+00:00

[ Upstream commit 49b472ebc61de3d4aa7cc57539246bb39f6c5128 ] Add NACK check after start byte is sent. It is possible to detect early that a device is not on the bus and avoid invalid transmissions thereafter. Signed-off-by: Clark Wang Reviewed-by: Miquel Raynal Link: https://lore.kernel.org/r/20230517033030.3068085-3-xiaoning.wang@nxp.com Signed-off-by: Alexandre Belloni Stable-dep-of: 9aaeef113c55 ("i3c: master: svc: fix random hot join failure since timeout error") Signed-off-by: Sasha Levin

i3c: master: svc: fix SDA keep low when polling IBIWON timeout happen

2023-11-28T17:07:14+00:00

commit dfd7cd6aafdb1f5ba93828e97e56b38304b23a05 upstream. Upon IBIWON timeout, the SDA line will always be kept low if we don't emit a stop. Calling svc_i3c_master_emit_stop() there will let the bus return to idle state. Fixes: dd3c52846d59 ("i3c: master: svc: Add Silvaco I3C master driver") Cc: Reviewed-by: Miquel Raynal Signed-off-by: Frank Li Link: https://lore.kernel.org/r/20231023161658.3890811-6-Frank.Li@nxp.com Signed-off-by: Alexandre Belloni Signed-off-by: Greg Kroah-Hartman

i3c: master: svc: fix check wrong status register in irq handler

2023-11-28T17:07:14+00:00

commit 225d5ef048c4ed01a475c95d94833bd7dd61072d upstream. svc_i3c_master_irq_handler() wrongly checks register SVC_I3C_MINTMASKED. It should be SVC_I3C_MSTATUS. Fixes: dd3c52846d59 ("i3c: master: svc: Add Silvaco I3C master driver") Cc: Reviewed-by: Miquel Raynal Signed-off-by: Frank Li Link: https://lore.kernel.org/r/20231023161658.3890811-5-Frank.Li@nxp.com Signed-off-by: Alexandre Belloni Signed-off-by: Greg Kroah-Hartman

i3c: master: svc: fix ibi may not return mandatory data byte

2023-11-28T17:07:14+00:00

commit c85e209b799f12d18a90ae6353b997b1bb1274a5 upstream. MSTATUS[RXPEND] is only updated after the data transfer cycle started. This creates an issue when the I3C clock is slow, and the CPU is running fast enough that MSTATUS[RXPEND] may not be updated when the code reaches checking point. As a result, mandatory data can be missed. Add a wait for MSTATUS[COMPLETE] to ensure that all mandatory data is already in FIFO. It also works without mandatory data. Fixes: dd3c52846d59 ("i3c: master: svc: Add Silvaco I3C master driver") Cc: Reviewed-by: Miquel Raynal Signed-off-by: Frank Li Link: https://lore.kernel.org/r/20231023161658.3890811-4-Frank.Li@nxp.com Signed-off-by: Alexandre Belloni Signed-off-by: Greg Kroah-Hartman

i3c: master: svc: fix wrong data return when IBI happen during start frame

2023-11-28T17:07:14+00:00

commit 5e5e3c92e748a6d859190e123b9193cf4911fcca upstream. ┌─────┐ ┏──┐ ┏──┐ ┏──┐ ┏──┐ ┏──┐ ┏──┐ ┏──┐ ┏──┐ ┌───── SCL: ┘ └─────┛ └──┛ └──┛ └──┛ └──┛ └──┛ └──┛ └──┛ └──┘ ───┐ ┌─────┐ ┌─────┐ ┌───────────┐ SDA: └───────────────────────┘ └─────┘ └─────┘ └───── xxx╱ ╲╱ ╲╱ ╲╱ ╲╱ ╲ : xxx╲IBI ╱╲ Addr(0x0a) ╱╲ RW ╱╲NACK╱╲ S ╱ If an In-Band Interrupt (IBI) occurs and IBI work thread is not immediately scheduled, when svc_i3c_master_priv_xfers() initiates the I3C transfer and attempts to send address 0x7e, the target interprets it as an IBI handler and returns the target address 0x0a. However, svc_i3c_master_priv_xfers() does not handle this case and proceeds with other transfers, resulting in incorrect data being returned. Add IBIWON check in svc_i3c_master_xfer(). In case this situation occurs, return a failure to the driver. Fixes: dd3c52846d59 ("i3c: master: svc: Add Silvaco I3C master driver") Cc: Reviewed-by: Miquel Raynal Signed-off-by: Frank Li Link: https://lore.kernel.org/r/20231023161658.3890811-3-Frank.Li@nxp.com Signed-off-by: Alexandre Belloni Signed-off-by: Greg Kroah-Hartman

i3c: master: svc: fix race condition in ibi work thread

2023-11-28T17:07:14+00:00

commit 6bf3fc268183816856c96b8794cd66146bc27b35 upstream. The ibi work thread operates asynchronously with other transfers, such as svc_i3c_master_priv_xfers(). Introduce mutex protection to ensure the completion of the entire i3c/i2c transaction. Fixes: dd3c52846d59 ("i3c: master: svc: Add Silvaco I3C master driver") Cc: Reviewed-by: Miquel Raynal Signed-off-by: Frank Li Link: https://lore.kernel.org/r/20231023161658.3890811-2-Frank.Li@nxp.com Signed-off-by: Alexandre Belloni Signed-off-by: Greg Kroah-Hartman

i3c: master: cdns: Fix reading status register

2023-11-28T17:07:14+00:00

commit 4bd8405257da717cd556f99e5fb68693d12c9766 upstream. IBIR_DEPTH and CMDR_DEPTH should read from status0 instead of status1. Cc: stable@vger.kernel.org Fixes: 603f2bee2c54 ("i3c: master: Add driver for Cadence IP") Signed-off-by: Joshua Yeong Reviewed-by: Miquel Raynal Link: https://lore.kernel.org/r/20230913031743.11439-2-joshua.yeong@starfivetech.com Signed-off-by: Alexandre Belloni Signed-off-by: Greg Kroah-Hartman

i3c: master: mipi-i3c-hci: Fix a kernel panic for accessing DAT_data.

2023-11-28T17:07:02+00:00

[ Upstream commit b53e9758a31c683fc8615df930262192ed5f034b ] The `i3c_master_bus_init` function may attach the I2C devices before the I3C bus initialization. In this flow, the DAT `alloc_entry`` will be used before the DAT `init`. Additionally, if the `i3c_master_bus_init` fails, the DAT `cleanup` will execute before the device is detached, which will execue DAT `free_entry` function. The above scenario can cause the driver to use DAT_data when it is NULL. Signed-off-by: Billy Tsai Link: https://lore.kernel.org/r/20231023080237.560936-1-billy_tsai@aspeedtech.com Signed-off-by: Alexandre Belloni Signed-off-by: Sasha Levin