kernel/linux.git/drivers/i3c/master.c, branch v6.1.124

i3c: master: Remove i3c_dev_disable_ibi_locked(olddev) on device hotjoin

2024-12-14T18:54:55+00:00

commit 36faa04ce3d9c962b4b29d285ad07ca29e2988e4 upstream. When a new device hotjoins, a new dynamic address is assigned. i3c_master_add_i3c_dev_locked() identifies that the device was previously attached to the bus and locates the olddev. i3c_master_add_i3c_dev_locked() { ... olddev = i3c_master_search_i3c_dev_duplicate(newdev); ... if (olddev) { ... i3c_dev_disable_ibi_locked(olddev); ^^^^^^ The olddev should not receive any commands on the i3c bus as it does not exist and has been assigned a new address. This will result in NACK or timeout. So remove it. } i3c_dev_free_ibi_locked(olddev); ^^^^^^^^ This function internally calls i3c_dev_disable_ibi_locked() function causing to send DISEC command with old Address. The olddev should not receive any commands on the i3c bus as it does not exist and has been assigned a new address. This will result in NACK or timeout. So, update the olddev->ibi->enabled flag to false to avoid DISEC with OldAddr. } Include part of Ravindra Yashvant Shinde's work: https://lore.kernel.org/linux-i3c/20240820151917.3904956-1-ravindra.yashvant.shinde@nxp.com/T/#u Fixes: 317bacf960a4 ("i3c: master: add enable(disable) hot join in sys entry") Co-developed-by: Ravindra Yashvant Shinde Signed-off-by: Ravindra Yashvant Shinde Reviewed-by: Miquel Raynal Signed-off-by: Frank Li Link: https://lore.kernel.org/r/20241001162232.223724-1-Frank.Li@nxp.com Signed-off-by: Alexandre Belloni Signed-off-by: Greg Kroah-Hartman

i3c: Use i3cdev->desc->info instead of calling i3c_device_get_info() to avoid deadlock

2024-12-14T18:54:48+00:00

[ Upstream commit 6cf7b65f7029914dc0cd7db86fac9ee5159008c6 ] A deadlock may happen since the i3c_master_register() acquires &i3cbus->lock twice. See the log below. Use i3cdev->desc->info instead of calling i3c_device_info() to avoid acquiring the lock twice. v2: - Modified the title and commit message ============================================ WARNING: possible recursive locking detected 6.11.0-mainline -------------------------------------------- init/1 is trying to acquire lock: f1ffff80a6a40dc0 (&i3cbus->lock){++++}-{3:3}, at: i3c_bus_normaluse_lock but task is already holding lock: f1ffff80a6a40dc0 (&i3cbus->lock){++++}-{3:3}, at: i3c_master_register other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&i3cbus->lock); lock(&i3cbus->lock); *** DEADLOCK *** May be due to missing lock nesting notation 2 locks held by init/1: #0: fcffff809b6798f8 (&dev->mutex){....}-{3:3}, at: __driver_attach #1: f1ffff80a6a40dc0 (&i3cbus->lock){++++}-{3:3}, at: i3c_master_register stack backtrace: CPU: 6 UID: 0 PID: 1 Comm: init Call trace: dump_backtrace+0xfc/0x17c show_stack+0x18/0x28 dump_stack_lvl+0x40/0xc0 dump_stack+0x18/0x24 print_deadlock_bug+0x388/0x390 __lock_acquire+0x18bc/0x32ec lock_acquire+0x134/0x2b0 down_read+0x50/0x19c i3c_bus_normaluse_lock+0x14/0x24 i3c_device_get_info+0x24/0x58 i3c_device_uevent+0x34/0xa4 dev_uevent+0x310/0x384 kobject_uevent_env+0x244/0x414 kobject_uevent+0x14/0x20 device_add+0x278/0x460 device_register+0x20/0x34 i3c_master_register_new_i3c_devs+0x78/0x154 i3c_master_register+0x6a0/0x6d4 mtk_i3c_master_probe+0x3b8/0x4d8 platform_probe+0xa0/0xe0 really_probe+0x114/0x454 __driver_probe_device+0xa0/0x15c driver_probe_device+0x3c/0x1ac __driver_attach+0xc4/0x1f0 bus_for_each_dev+0x104/0x160 driver_attach+0x24/0x34 bus_add_driver+0x14c/0x294 driver_register+0x68/0x104 __platform_driver_register+0x20/0x30 init_module+0x20/0xfe4 do_one_initcall+0x184/0x464 do_init_module+0x58/0x1ec load_module+0xefc/0x10c8 __arm64_sys_finit_module+0x238/0x33c invoke_syscall+0x58/0x10c el0_svc_common+0xa8/0xdc do_el0_svc+0x1c/0x28 el0_svc+0x50/0xac el0t_64_sync_handler+0x70/0xbc el0t_64_sync+0x1a8/0x1ac Signed-off-by: Defa Li Link: https://lore.kernel.org/r/20241107132549.25439-1-defa.li@mediatek.com Signed-off-by: Alexandre Belloni Signed-off-by: Sasha Levin

i3c: master: Fix dynamic address leak when 'assigned-address' is present

2024-12-14T18:54:28+00:00

[ Upstream commit 851bd21cdb55e727ab29280bc9f6b678164f802a ] If the DTS contains 'assigned-address', a dynamic address leak occurs during hotjoin events. Assume a device have assigned-address 0xb. - Device issue Hotjoin - Call i3c_master_do_daa() - Call driver xxx_do_daa() - Call i3c_master_get_free_addr() to get dynamic address 0x9 - i3c_master_add_i3c_dev_locked(0x9) - expected_dyn_addr = newdev->boardinfo->init_dyn_addr (0xb); - i3c_master_reattach_i3c_dev(newdev(0xb), old_dyn_addr(0x9)); - if (dev->info.dyn_addr != old_dyn_addr && ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 0xb != 0x9 -> TRUE (!dev->boardinfo || ^^^^^^^^^^^^^^^ -> FALSE dev->info.dyn_addr != dev->boardinfo->init_dyn_addr)) { ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 0xb != 0xb -> FALSE ... i3c_bus_set_addr_slot_status(&master->bus, old_dyn_addr, I3C_ADDR_SLOT_FREE); ^^^ This will be skipped. So old_dyn_addr never free } - i3c_master_get_free_addr() will return increased sequence number. Remove dev->info.dyn_addr != dev->boardinfo->init_dyn_addr condition check. dev->info.dyn_addr should be checked before calling this function because i3c_master_setnewda_locked() has already been called and the target device has already accepted dyn_addr. It is too late to check if dyn_addr is free in i3c_master_reattach_i3c_dev(). Add check to ensure expected_dyn_addr is free before i3c_master_setnewda_locked(). Fixes: cc3a392d69b6 ("i3c: master: fix for SETDASA and DAA process") Cc: stable@kernel.org Reviewed-by: Miquel Raynal Signed-off-by: Frank Li Link: https://lore.kernel.org/r/20241021-i3c_dts_assign-v8-3-4098b8bde01e@nxp.com Signed-off-by: Alexandre Belloni Signed-off-by: Sasha Levin

i3c: master: Extend address status bit to 4 and add I3C_ADDR_SLOT_EXT_DESIRED

2024-12-14T18:54:27+00:00

[ Upstream commit 2f552fa280590e61bd3dbe66a7b54b99caa642a4 ] Extend the address status bit to 4 and introduce the I3C_ADDR_SLOT_EXT_DESIRED macro to indicate that a device prefers a specific address. This is generally set by the 'assigned-address' in the device tree source (dts) file. ┌────┬─────────────┬───┬─────────┬───┐ │S/Sr│ 7'h7E RnW=0 │ACK│ ENTDAA │ T ├────┐ └────┴─────────────┴───┴─────────┴───┘ │ ┌─────────────────────────────────────────┘ │ ┌──┬─────────────┬───┬─────────────────┬────────────────┬───┬─────────┐ └─►│Sr│7'h7E RnW=1 │ACK│48bit UID BCR DCR│Assign 7bit Addr│PAR│ ACK/NACK│ └──┴─────────────┴───┴─────────────────┴────────────────┴───┴─────────┘ Some master controllers (such as HCI) need to prepare the entire above transaction before sending it out to the I3C bus. This means that a 7-bit dynamic address needs to be allocated before knowing the target device's UID information. However, some I3C targets may request specific addresses (called as "init_dyn_addr"), which is typically specified by the DT-'s assigned-address property. Lower addresses having higher IBI priority. If it is available, i3c_bus_get_free_addr() preferably return a free address that is not in the list of desired addresses (called as "init_dyn_addr"). This allows the device with the "init_dyn_addr" to switch to its "init_dyn_addr" when it hot-joins the I3C bus. Otherwise, if the "init_dyn_addr" is already in use by another I3C device, the target device will not be able to switch to its desired address. If the previous step fails, fallback returning one of the remaining unassigned address, regardless of its state in the desired list. Reviewed-by: Miquel Raynal Signed-off-by: Frank Li Link: https://lore.kernel.org/r/20241021-i3c_dts_assign-v8-2-4098b8bde01e@nxp.com Signed-off-by: Alexandre Belloni Stable-dep-of: 851bd21cdb55 ("i3c: master: Fix dynamic address leak when 'assigned-address' is present") Signed-off-by: Sasha Levin

i3c: master: Replace hard code 2 with macro I3C_ADDR_SLOT_STATUS_BITS

2024-12-14T18:54:27+00:00

[ Upstream commit 16aed0a6520ba01b7d22c32e193fc1ec674f92d4 ] Replace the hardcoded value 2, which indicates 2 bits for I3C address status, with the predefined macro I3C_ADDR_SLOT_STATUS_BITS. Improve maintainability and extensibility of the code. Reviewed-by: Miquel Raynal Signed-off-by: Frank Li Link: https://lore.kernel.org/r/20241021-i3c_dts_assign-v8-1-4098b8bde01e@nxp.com Signed-off-by: Alexandre Belloni Stable-dep-of: 851bd21cdb55 ("i3c: master: Fix dynamic address leak when 'assigned-address' is present") Signed-off-by: Sasha Levin

i3c: master: support to adjust first broadcast address speed

2024-12-14T18:54:27+00:00

[ Upstream commit aef79e189ba2b32f78bd35daf2c0b41f3868a321 ] According to I3C spec 6.2 Timing Specification, the Open Drain High Period of SCL Clock timing for first broadcast address should be adjusted to 200ns at least. I3C device working as i2c device will see the broadcast to close its Spike Filter then change to work at I3C mode. After that I3C open drain SCL high level should be adjusted back. Signed-off-by: Carlos Song Reviewed-by: Miquel Raynal Reviewed-by: Frank Li Link: https://lore.kernel.org/r/20240910051626.4052552-1-carlos.song@nxp.com Signed-off-by: Alexandre Belloni Stable-dep-of: 25bc99be5fe5 ("i3c: master: svc: Modify enabled_events bit 7:0 to act as IBI enable counter") Signed-off-by: Sasha Levin

i3c: master: add enable(disable) hot join in sys entry

2024-12-14T18:54:26+00:00

[ Upstream commit 317bacf960a4879af22d12175f47d284930b3273 ] Add hotjoin entry in sys file system allow user enable/disable hotjoin feature. Add (*enable(disable)_hotjoin)() to i3c_master_controller_ops. Add api i3c_master_enable(disable)_hotjoin(); Signed-off-by: Frank Li Link: https://lore.kernel.org/r/20231201222532.2431484-2-Frank.Li@nxp.com Signed-off-by: Alexandre Belloni Stable-dep-of: 25bc99be5fe5 ("i3c: master: svc: Modify enabled_events bit 7:0 to act as IBI enable counter") Signed-off-by: Sasha Levin

i3c: Make i3c_master_unregister() return void

2024-12-14T18:54:26+00:00

[ Upstream commit 0f74f8b6675cc36d689abb4d9b3d75ab4049b7d7 ] The function returned zero unconditionally. Switch the return type to void and simplify the callers accordingly. Signed-off-by: Uwe Kleine-König Reviewed-by: Miquel Raynal Link: https://lore.kernel.org/r/20230318233311.265186-2-u.kleine-koenig@pengutronix.de Signed-off-by: Alexandre Belloni Stable-dep-of: 25bc99be5fe5 ("i3c: master: svc: Modify enabled_events bit 7:0 to act as IBI enable counter") Signed-off-by: Sasha Levin

i3c: master: Fix miss free init_dyn_addr at i3c_master_put_i3c_addrs()

2024-12-14T18:54:15+00:00

commit 3082990592f7c6d7510a9133afa46e31bbe26533 upstream. if (dev->boardinfo && dev->boardinfo->init_dyn_addr) ^^^ here check "init_dyn_addr" i3c_bus_set_addr_slot_status(&master->bus, dev->info.dyn_addr, ...) ^^^^ free "dyn_addr" Fix copy/paste error "dyn_addr" by replacing it with "init_dyn_addr". Cc: stable@kernel.org Fixes: 3a379bbcea0a ("i3c: Add core I3C infrastructure") Reviewed-by: Miquel Raynal Signed-off-by: Frank Li Link: https://lore.kernel.org/r/20241001162608.224039-1-Frank.Li@nxp.com Signed-off-by: Alexandre Belloni Signed-off-by: Greg Kroah-Hartman

i3c: Fix potential refcount leak in i3c_master_register_new_i3c_devs

2023-11-20T10:52:13+00:00

[ Upstream commit cab63f64887616e3c4e31cfd8103320be6ebc8d3 ] put_device() needs to be called on failure of device_register() to give up the reference initialized in it to avoid refcount leak. Fixes: 3a379bbcea0a ("i3c: Add core I3C infrastructure") Signed-off-by: Dinghao Liu Link: https://lore.kernel.org/r/20230921082410.25548-1-dinghao.liu@zju.edu.cn Signed-off-by: Alexandre Belloni Signed-off-by: Sasha Levin