kernel/linux.git/drivers/i2c, branch v6.1.124

i2c: microchip-core: fix "ghost" detections

2025-01-02T09:30:55+00:00

commit 49e1f0fd0d4cb03a16b8526c4e683e1958f71490 upstream. Running i2c-detect currently produces an output akin to: 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: 08 -- 0a -- 0c -- 0e -- 10: 10 -- 12 -- 14 -- 16 -- UU 19 -- 1b -- 1d -- 1f 20: -- 21 -- 23 -- 25 -- 27 -- 29 -- 2b -- 2d -- 2f 30: -- -- -- -- -- -- -- -- 38 -- 3a -- 3c -- 3e -- 40: 40 -- 42 -- 44 -- 46 -- 48 -- 4a -- 4c -- 4e -- 50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 60: 60 -- 62 -- 64 -- 66 -- 68 -- 6a -- 6c -- 6e -- 70: 70 -- 72 -- 74 -- 76 -- This happens because for an i2c_msg with a len of 0 the driver will mark the transmission of the message as a success once the START has been sent, without waiting for the devices on the bus to respond with an ACK/NAK. Since i2cdetect seems to run in a tight loop over all addresses the NAK is treated as part of the next test for the next address. Delete the fast path that marks a message as complete when idev->msg_len is zero after sending a START/RESTART since this isn't a valid scenario. CC: stable@vger.kernel.org Fixes: 64a6f1c4987e ("i2c: add support for microchip fpga i2c controllers") Signed-off-by: Conor Dooley Reviewed-by: Andi Shyti Link: https://lore.kernel.org/r/20241218-outbid-encounter-b2e78b1cc707@spud Signed-off-by: Andi Shyti Signed-off-by: Greg Kroah-Hartman

i2c: imx: add imx7d compatible string for applying erratum ERR007805

2025-01-02T09:30:55+00:00

commit e0cec363197e41af870613e8e17b30bf0e3d41b5 upstream. Compatible string "fsl,imx7d-i2c" is not exited at i2c-imx driver compatible string table, at the result, "fsl,imx21-i2c" will be matched, but it will cause erratum ERR007805 not be applied in fact. So Add "fsl,imx7d-i2c" compatible string in i2c-imx driver to apply the erratum ERR007805(https://www.nxp.com/docs/en/errata/IMX7DS_3N09P.pdf). " ERR007805 I2C: When the I2C clock speed is configured for 400 kHz, the SCL low period violates the I2C spec of 1.3 uS min Description: When the I2C module is programmed to operate at the maximum clock speed of 400 kHz (as defined by the I2C spec), the SCL clock low period violates the I2C spec of 1.3 uS min. The user must reduce the clock speed to obtain the SCL low time to meet the 1.3us I2C minimum required. This behavior means the SoC is not compliant to the I2C spec at 400kHz. Workaround: To meet the clock low period requirement in fast speed mode, SCL must be configured to 384KHz or less. " "fsl,imx7d-i2c" already is documented in binding doc. This erratum fix has been included in imx6_i2c_hwdata and it is the same in all I.MX6/7/8, so just reuse it. Fixes: 39c025721d70 ("i2c: imx: Implement errata ERR007805 or e7805 bus frequency limit") Cc: stable@vger.kernel.org # v5.18+ Signed-off-by: Carlos Song Signed-off-by: Haibo Chen Reviewed-by: Frank Li Fixes: 39c025721d70 ("i2c: imx: Implement errata ERR007805 or e7805 bus frequency limit") Acked-by: Oleksij Rempel Link: https://lore.kernel.org/r/20241218044238.143414-1-carlos.song@nxp.com Signed-off-by: Andi Shyti Signed-off-by: Greg Kroah-Hartman

i2c: microchip-core: actually use repeated sends

2025-01-02T09:30:54+00:00

commit 9a8f9320d67b27ddd7f1ee88d91820197a0e908f upstream. At present, where repeated sends are intended to be used, the i2c-microchip-core driver sends a stop followed by a start. Lots of i2c devices must not malfunction in the face of this behaviour, because the driver has operated like this for years! Try to keep track of whether or not a repeated send is required, and suppress sending a stop in these cases. CC: stable@vger.kernel.org Fixes: 64a6f1c4987e ("i2c: add support for microchip fpga i2c controllers") Signed-off-by: Conor Dooley Reviewed-by: Andi Shyti Link: https://lore.kernel.org/r/20241218-football-composure-e56df2461461@spud Signed-off-by: Andi Shyti Signed-off-by: Greg Kroah-Hartman

i2c: riic: Always round-up when calculating bus period

2024-12-27T12:52:55+00:00

commit de6b43798d9043a7c749a0428dbb02d5fff156e5 upstream. Currently, the RIIC driver may run the I2C bus faster than requested, which may cause subtle failures. E.g. Biju reported a measured bus speed of 450 kHz instead of the expected maximum of 400 kHz on RZ/G2L. The initial calculation of the bus period uses DIV_ROUND_UP(), to make sure the actual bus speed never becomes faster than the requested bus speed. However, the subsequent division-by-two steps do not use round-up, which may lead to a too-small period, hence a too-fast and possible out-of-spec bus speed. E.g. on RZ/Five, requesting a bus speed of 100 resp. 400 kHz will yield too-fast target bus speeds of 100806 resp. 403226 Hz instead of 97656 resp. 390625 Hz. Fix this by using DIV_ROUND_UP() in the subsequent divisions, too. Tested on RZ/A1H, RZ/A2M, and RZ/Five. Fixes: d982d66514192cdb ("i2c: riic: remove clock and frequency restrictions") Reported-by: Biju Das Signed-off-by: Geert Uytterhoeven Cc: # v4.15+ Link: https://lore.kernel.org/r/c59aea77998dfea1b4456c4b33b55ab216fcbf5e.1732284746.git.geert+renesas@glider.be Signed-off-by: Andi Shyti Signed-off-by: Greg Kroah-Hartman

i2c: pnx: Fix timeout in wait functions

2024-12-27T12:52:53+00:00

[ Upstream commit 7363f2d4c18557c99c536b70489187bb4e05c412 ] Since commit f63b94be6942 ("i2c: pnx: Fix potential deadlock warning from del_timer_sync() call in isr") jiffies are stored in i2c_pnx_algo_data.timeout, but wait_timeout and wait_reset are still using it as milliseconds. Convert jiffies back to milliseconds to wait for the expected amount of time. Fixes: f63b94be6942 ("i2c: pnx: Fix potential deadlock warning from del_timer_sync() call in isr") Signed-off-by: Vladimir Riabchun Signed-off-by: Andi Shyti Signed-off-by: Sasha Levin

i2c: i801: Use a different adapter-name for IDF adapters

2024-10-17T13:22:14+00:00

[ Upstream commit 43457ada98c824f310adb7bd96bd5f2fcd9a3279 ] On chipsets with a second 'Integrated Device Function' SMBus controller use a different adapter-name for the second IDF adapter. This allows platform glue code which is looking for the primary i801 adapter to manually instantiate i2c_clients on to differentiate between the 2. This allows such code to find the primary i801 adapter by name, without needing to duplicate the PCI-ids to feature-flags mapping from i2c-i801.c. Reviewed-by: Pali Rohár Signed-off-by: Hans de Goede Acked-by: Wolfram Sang Signed-off-by: Andi Shyti Signed-off-by: Sasha Levin

i2c: xiic: Fix pm_runtime_set_suspended() with runtime pm enabled

2024-10-17T13:22:04+00:00

[ Upstream commit 0c8d604dea437b69a861479b413d629bc9b3da70 ] It is not valid to call pm_runtime_set_suspended() for devices with runtime PM enabled because it returns -EAGAIN if it is enabled already and working. So, call pm_runtime_disable() before to fix it. Fixes: 36ecbcab84d0 ("i2c: xiic: Implement power management") Cc: # v4.6+ Signed-off-by: Jinjie Ruan Signed-off-by: Andi Shyti Signed-off-by: Sasha Levin

i2c: xiic: Use devm_clk_get_enabled()

2024-10-17T13:22:04+00:00

[ Upstream commit 8390dc7477e49e4acc9e553f385f4ff59d186efe ] Replace the pair of functions, devm_clk_get() and clk_prepare_enable(), with a single function devm_clk_get_enabled(). Signed-off-by: Andi Shyti Acked-by: Michal Simek Signed-off-by: Wolfram Sang Stable-dep-of: 0c8d604dea43 ("i2c: xiic: Fix pm_runtime_set_suspended() with runtime pm enabled") Signed-off-by: Sasha Levin

i2c: core: Lock address during client device instantiation

2024-10-17T13:22:04+00:00

[ Upstream commit 8d3cefaf659265aa82b0373a563fdb9d16a2b947 ] Krzysztof reported an issue [0] which is caused by parallel attempts to instantiate the same I2C client device. This can happen if driver supports auto-detection, but certain devices are also instantiated explicitly. The original change isn't actually wrong, it just revealed that I2C core isn't prepared yet to handle this scenario. Calls to i2c_new_client_device() can be nested, therefore we can't use a simple mutex here. Parallel instantiation of devices at different addresses is ok, so we just have to prevent parallel instantiation at the same address. We can use a bitmap with one bit per 7-bit I2C client address, and atomic bit operations to set/check/clear bits. Now a parallel attempt to instantiate a device at the same address will result in -EBUSY being returned, avoiding the "sysfs: cannot create duplicate filename" splash. Note: This patch version includes small cosmetic changes to the Tested-by version, only functional change is that address locking is supported for slave addresses too. [0] https://lore.kernel.org/linux-i2c/9479fe4e-eb0c-407e-84c0-bd60c15baf74@ans.pl/T/#m12706546e8e2414d8f1a0dc61c53393f731685cc Fixes: caba40ec3531 ("eeprom: at24: Probe for DDR3 thermal sensor in the SPD case") Cc: stable@vger.kernel.org Tested-by: Krzysztof Piotr Oledzki Signed-off-by: Heiner Kallweit Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin

i2c: create debugfs entry per adapter

2024-10-17T13:22:03+00:00

[ Upstream commit 73febd775bdbdb98c81255ff85773ac410ded5c4 ] Two drivers already implement custom debugfs handling for their i2c_adapter and more will come. So, let the core create a debugfs directory per adapter and pass that to drivers for their debugfs files. Signed-off-by: Wolfram Sang Signed-off-by: Wolfram Sang Stable-dep-of: 8d3cefaf6592 ("i2c: core: Lock address during client device instantiation") Signed-off-by: Sasha Levin