kernel/linux.git/drivers/i2c, branch v4.4.171

i2c: dev: prevent adapter retries and timeout being set as minus value

2019-01-16T21:16:12+00:00

commit 6ebec961d59bccf65d08b13fc1ad4e6272a89338 upstream. If adapter->retries is set to a minus value from user space via ioctl, it will make __i2c_transfer and __i2c_smbus_xfer skip the calling to adapter->algo->master_xfer and adapter->algo->smbus_xfer that is registered by the underlying bus drivers, and return value 0 to all the callers. The bus driver will never be accessed anymore by all users, besides, the users may still get successful return value without any error or information log print out. If adapter->timeout is set to minus value from user space via ioctl, it will make the retrying loop in __i2c_transfer and __i2c_smbus_xfer always break after the the first try, due to the time_after always returns true. Signed-off-by: Yi Zeng [wsa: minor grammar updates to commit message] Signed-off-by: Wolfram Sang Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman

i2c: scmi: Fix probe error on devices with an empty SMB0001 ACPI device node

2018-12-21T13:09:53+00:00

[ Upstream commit 0544ee4b1ad574aec3b6379af5f5cdee42840971 ] Some AMD based HP laptops have a SMB0001 ACPI device node which does not define any methods. This leads to the following error in dmesg: [ 5.222731] cmi: probe of SMB0001:00 failed with error -5 This commit makes acpi_smbus_cmi_add() return -ENODEV instead in this case silencing the error. In case of a failure of the i2c_add_adapter() call this commit now propagates the error from that call instead of -EIO. Signed-off-by: Hans de Goede Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin

i2c: axxia: properly handle master timeout

2018-12-21T13:09:53+00:00

[ Upstream commit 6c7f25cae54b840302e4f1b371dbf318fbf09ab2 ] According to Intel (R) Axxia TM Lionfish Communication Processor Peripheral Subsystem Hardware Reference Manual, the AXXIA I2C module have a programmable Master Wait Timer, which among others, checks the time between commands send in manual mode. When a timeout (25ms) passes, TSS bit is set in Master Interrupt Status register and a Stop command is issued by the hardware. The axxia_i2c_xfer(), does not properly handle this situation, however. For each message a separate axxia_i2c_xfer_msg() is called and this function incorrectly assumes that any interrupt might happen only when waiting for completion. This is mostly correct but there is one exception - a master timeout can trigger if enough time has passed between individual transfers. It will, by definition, happen between transfers when the interrupts are disabled by the code. If that happens, the hardware issues Stop command. The interrupt indicating timeout will not be triggered as soon as we enable them since the Master Interrupt Status is cleared when master mode is entered again (which happens before enabling irqs) meaning this error is lost and the transfer is continued even though the Stop was issued on the bus. The subsequent operations completes without error but a bogus value (0xFF in case of read) is read as the client device is confused because aborted transfer. No error is returned from master_xfer() making caller believe that a valid value was read. To fix the problem, the TSS bit (indicating timeout) in Master Interrupt Status register is checked before each transfer. If it is set, there was a timeout before this transfer and (as described above) the hardware already issued Stop command so the transaction should be aborted thus -ETIMEOUT is returned from the master_xfer() callback. In order to be sure no timeout was issued we can't just read the status just before starting new transaction as there will always be a small window of time (few CPU cycles at best) where this might still happen. For this reason we have to temporally disable the timer before checking for TSS bit. Disabling it will, however, clear the TSS bit so in order to preserve that information, we have to read it in ISR so we have to ensure that the TSS interrupt is not masked between transfers of one transaction. There is no need to call bus recovery or controller reinitialization if that happens so it's skipped. Signed-off-by: Krzysztof Adamski Reviewed-by: Alexander Sverdlin Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin

i2c: i2c-scmi: fix for i2c_smbus_write_block_data

2018-10-20T07:52:35+00:00

commit 08d9db00fe0e300d6df976e6c294f974988226dd upstream. The i2c-scmi driver crashes when the SMBus Write Block transaction is executed: WARNING: CPU: 9 PID: 2194 at mm/page_alloc.c:3931 __alloc_pages_slowpath+0x9db/0xec0 Call Trace: ? get_page_from_freelist+0x49d/0x11f0 ? alloc_pages_current+0x6a/0xe0 ? new_slab+0x499/0x690 __alloc_pages_nodemask+0x265/0x280 alloc_pages_current+0x6a/0xe0 kmalloc_order+0x18/0x40 kmalloc_order_trace+0x24/0xb0 ? acpi_ut_allocate_object_desc_dbg+0x62/0x10c __kmalloc+0x203/0x220 acpi_os_allocate_zeroed+0x34/0x36 acpi_ut_copy_eobject_to_iobject+0x266/0x31e acpi_evaluate_object+0x166/0x3b2 acpi_smbus_cmi_access+0x144/0x530 [i2c_scmi] i2c_smbus_xfer+0xda/0x370 i2cdev_ioctl_smbus+0x1bd/0x270 i2cdev_ioctl+0xaa/0x250 do_vfs_ioctl+0xa4/0x600 SyS_ioctl+0x79/0x90 do_syscall_64+0x73/0x130 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 ACPI Error: Evaluating _SBW: 4 (20170831/smbus_cmi-185) This problem occurs because the length of ACPI Buffer object is not defined/initialized in the code before a corresponding ACPI method is called. The obvious patch below fixes this issue. Signed-off-by: Edgar Cherkasov Acked-by: Viktor Krasnov Acked-by: Michael Brunner Signed-off-by: Wolfram Sang Signed-off-by: Greg Kroah-Hartman

i2c: uniphier-f: issue STOP only for last message or I2C_M_STOP

2018-10-10T06:52:11+00:00

[ Upstream commit 4c85609b08c4761eca0a40fd7beb06bc650f252d ] This driver currently emits a STOP if the next message is not I2C_MD_RD. It should not do it because it disturbs the I2C_RDWR ioctl, where read/write transactions are combined without STOP between. Issue STOP only when the message is the last one _or_ flagged with I2C_M_STOP. Fixes: 6a62974b667f ("i2c: uniphier_f: add UniPhier FIFO-builtin I2C driver") Signed-off-by: Masahiro Yamada Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

i2c: uniphier: issue STOP only for last message or I2C_M_STOP

2018-10-10T06:52:11+00:00

[ Upstream commit 38f5d8d8cbb2ffa2b54315118185332329ec891c ] This driver currently emits a STOP if the next message is not I2C_MD_RD. It should not do it because it disturbs the I2C_RDWR ioctl, where read/write transactions are combined without STOP between. Issue STOP only when the message is the last one _or_ flagged with I2C_M_STOP. Fixes: dd6fd4a32793 ("i2c: uniphier: add UniPhier FIFO-less I2C driver") Signed-off-by: Masahiro Yamada Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

i2c: i801: Allow ACPI AML access I/O ports not reserved for SMBus

2018-10-10T06:52:09+00:00

[ Upstream commit 7fd6d98b89f382d414e1db528e29a67bbd749457 ] Commit 7ae81952cda ("i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR") made it possible for AML code to access SMBus I/O ports by installing custom SystemIO OpRegion handler and blocking i80i driver access upon first AML read/write to this OpRegion. However, while ThinkPad T560 does have SystemIO OpRegion declared under the SMBus device, it does not access any of the SMBus registers: Device (SMBU) { ... OperationRegion (SMBP, PCI_Config, 0x50, 0x04) Field (SMBP, DWordAcc, NoLock, Preserve) { , 5, TCOB, 11, Offset (0x04) } Name (TCBV, 0x00) Method (TCBS, 0, NotSerialized) { If ((TCBV == 0x00)) { TCBV = (\_SB.PCI0.SMBU.TCOB << 0x05) } Return (TCBV) /* \_SB_.PCI0.SMBU.TCBV */ } OperationRegion (TCBA, SystemIO, TCBS (), 0x10) Field (TCBA, ByteAcc, NoLock, Preserve) { Offset (0x04), , 9, CPSC, 1 } } Problem with the current approach is that it blocks all I/O port access and because this system has touchpad connected to the SMBus controller after first AML access (happens during suspend/resume cycle) the touchpad fails to work anymore. Fix this so that we allow ACPI AML I/O port access if it does not touch the region reserved for the SMBus. Fixes: 7ae81952cda ("i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR") Link: https://bugzilla.kernel.org/show_bug.cgi?id=200737 Reported-by: Yussuf Khalil Signed-off-by: Mika Westerberg Reviewed-by: Jean Delvare Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

i2c: i801: fix DNV's SMBCTRL register offset

2018-09-19T20:48:55+00:00

commit 851a15114895c5bce163a6f2d57e0aa4658a1be4 upstream. DNV's iTCO is slightly different with SMBCTRL sitting at a different offset when compared to all other devices. Let's fix so that we can properly use iTCO watchdog. Fixes: 84d7f2ebd70d ("i2c: i801: Add support for Intel DNV") Cc: # v4.4+ Signed-off-by: Felipe Balbi Reviewed-by: Jean Delvare Signed-off-by: Wolfram Sang Signed-off-by: Greg Kroah-Hartman

i2c: xiic: Make the start and the byte count write atomic

2018-09-19T20:48:55+00:00

commit ae7304c3ea28a3ba47a7a8312c76c654ef24967e upstream. Disable interrupts while configuring the transfer and enable them back. We have below as the programming sequence 1. start and slave address 2. byte count and stop In some customer platform there was a lot of interrupts between 1 and 2 and after slave address (around 7 clock cyles) if 2 is not executed then the transaction is nacked. To fix this case make the 2 writes atomic. Signed-off-by: Shubhrajyoti Datta Signed-off-by: Michal Simek [wsa: added a newline for better readability] Signed-off-by: Wolfram Sang Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman

i2c: davinci: Avoid zero value of CLKH

2018-09-05T07:18:35+00:00

[ Upstream commit cc8de9a68599b261244ea453b38678229f06ada7 ] If CLKH is set to 0 I2C clock is not generated at all, so avoid this value and stretch the clock in this case. Signed-off-by: Alexander Sverdlin Acked-by: Sekhar Nori Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman