kernel/linux.git/drivers/i2c, branch v4.19.77

i2c: riic: Clear NACK in tend isr

2019-10-05T11:10:12+00:00

commit a71e2ac1f32097fbb2beab098687a7a95c84543e upstream. The NACKF flag should be cleared in INTRIICNAKI interrupt processing as description in HW manual. This issue shows up quickly when PREEMPT_RT is applied and a device is probed that is not plugged in (like a touchscreen controller). The result is endless interrupts that halt system boot. Fixes: 310c18a41450 ("i2c: riic: add driver") Cc: stable@vger.kernel.org Reported-by: Chien Nguyen Signed-off-by: Chris Brandt Signed-off-by: Wolfram Sang Signed-off-by: Greg Kroah-Hartman

i2c: designware: Synchronize IRQs when unregistering slave client

2019-09-21T05:17:06+00:00

[ Upstream commit c486dcd2f1bbdd524a1e0149734b79e4ae329650 ] Make sure interrupt handler i2c_dw_irq_handler_slave() has finished before clearing the the dev->slave pointer in i2c_dw_unreg_slave(). There is possibility for a race if i2c_dw_irq_handler_slave() is running on another CPU while clearing the dev->slave pointer. Reported-by: Krzysztof Adamski Reported-by: Wolfram Sang Signed-off-by: Jarkko Nikula Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin

i2c: at91: fix clk_offset for sama5d2

2019-09-16T06:22:22+00:00

[ Upstream commit b1ac6704493fa14b5dc19eb6b69a73932361a131 ] In SAMA5D2 datasheet, TWIHS_CWGR register rescription mentions clock offset of 3 cycles (compared to 4 in eg. SAMA5D3). Cc: stable@vger.kernel.org # 5.2.x [needs applying to i2c-at91.c instead for earlier kernels] Fixes: 0ef6f3213dac ("i2c: at91: add support for new alternative command mode") Signed-off-by: Michał Mirosław Acked-by: Ludovic Desroches Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin

i2c: at91: disable TXRDY interrupt after sending data

2019-09-16T06:22:22+00:00

[ Upstream commit d12e3aae160fb26b534c4496b211d6e60a5179ed ] Driver was not disabling TXRDY interrupt after last TX byte. This caused interrupt storm until transfer timeouts for slow or broken device on the bus. The patch fixes the interrupt storm on my SAMA5D2-based board. Cc: stable@vger.kernel.org # 5.2.x [v5.2 introduced file split; the patch should apply to i2c-at91.c before the split] Fixes: fac368a04048 ("i2c: at91: add new driver") Signed-off-by: Michał Mirosław Acked-by: Ludovic Desroches Tested-by: Raag Jadav Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin

i2c: piix4: Fix port selection for AMD Family 16h Model 30h

2019-09-06T08:22:23+00:00

[ Upstream commit c7c06a1532f3fe106687ac82a13492c6a619ff1c ] Family 16h Model 30h SMBus controller needs the same port selection fix as described and fixed in commit 0fe16195f891 ("i2c: piix4: Fix SMBus port selection for AMD Family 17h chips") commit 6befa3fde65f ("i2c: piix4: Support alternative port selection register") also fixed the port selection for Hudson2, but unfortunately this is not the exact same device and the AMD naming and PCI Device IDs aren't particularly helpful here. The SMBus port selection register is common to the following Families and models, as documented in AMD's publicly available BIOS and Kernel Developer Guides: 50742 - Family 15h Model 60h-6Fh (PCI_DEVICE_ID_AMD_KERNCZ_SMBUS) 55072 - Family 15h Model 70h-7Fh (PCI_DEVICE_ID_AMD_KERNCZ_SMBUS) 52740 - Family 16h Model 30h-3Fh (PCI_DEVICE_ID_AMD_HUDSON2_SMBUS) The Hudson2 PCI Device ID (PCI_DEVICE_ID_AMD_HUDSON2_SMBUS) is shared between Bolton FCH and Family 16h Model 30h, but the location of the SmBus0Sel port selection bits are different: 51192 - Bolton Register Reference Guide We distinguish between Bolton and Family 16h Model 30h using the PCI Revision ID: Bolton is device 0x780b, revision 0x15 Family 16h Model 30h is device 0x780b, revision 0x1F Family 15h Model 60h and 70h are both device 0x790b, revision 0x4A. The following additional public AMD BKDG documents were checked and do not share the same port selection register: 42301 - Family 15h Model 00h-0Fh doesn't mention any 42300 - Family 15h Model 10h-1Fh doesn't mention any 49125 - Family 15h Model 30h-3Fh doesn't mention any 48751 - Family 16h Model 00h-0Fh uses the previously supported index register SB800_PIIX4_PORT_IDX_ALT at 0x2e Signed-off-by: Andrew Cooks Signed-off-by: Jean Delvare Cc: stable@vger.kernel.org [v4.6+] Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin

i2c: emev2: avoid race when unregistering slave client

2019-09-06T08:21:59+00:00

[ Upstream commit d7437fc0d8291181debe032671a289b6bd93f46f ] After we disabled interrupts, there might still be an active one running. Sync before clearing the pointer to the slave device. Fixes: c31d0a00021d ("i2c: emev2: add slave support") Reported-by: Krzysztof Adamski Signed-off-by: Wolfram Sang Reviewed-by: Krzysztof Adamski Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin

i2c: rcar: avoid race when unregistering slave client

2019-09-06T08:21:58+00:00

[ Upstream commit 7b814d852af6944657c2961039f404c4490771c0 ] After we disabled interrupts, there might still be an active one running. Sync before clearing the pointer to the slave device. Fixes: de20d1857dd6 ("i2c: rcar: add slave support") Reported-by: Krzysztof Adamski Signed-off-by: Wolfram Sang Reviewed-by: Krzysztof Adamski Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin

gcc-9: don't warn about uninitialized variable

2019-08-09T15:52:27+00:00

commit cf676908846a06443fa5e6724ca3f5dd7460eca1 upstream. I'm not sure what made gcc warn about this code now. The 'ret' variable does end up initialized in all cases, but it's definitely not obvious, so the compiler is quite reasonable to warn about this. So just add initialization to make it all much more obvious both to compilers and to humans. Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

i2c: stm32f7: fix the get_irq error cases

2019-07-31T05:27:02+00:00

[ Upstream commit 79b4499524ed659fb76323efc30f3dc03967c88f ] During probe, return the "get_irq" error value instead of -EINVAL which allows the driver to be deferred probed if needed. Fix also the case where of_irq_get() returns a negative value. Note : On failure of_irq_get() returns 0 or a negative value while platform_get_irq() returns a negative value. Fixes: aeb068c57214 ("i2c: i2c-stm32f7: add driver") Reviewed-by: Pierre-Yves MORDRET Signed-off-by: Fabien Dessenne Signed-off-by: Fabrice Gasnier Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin

i2c: pca-platform: Fix GPIO lookup code

2019-07-10T07:53:39+00:00

[ Upstream commit a0cac264a86fbf4d6cb201fbbb73c1d335e3248a ] The devm_gpiod_request_gpiod() call will add "-gpios" to any passed connection ID before looking it up. I do not think the reset GPIO on this platform is named "reset-gpios-gpios" but rather "reset-gpios" in the device tree, so fix this up so that we get a proper reset GPIO handle. Also drop the inclusion of the legacy GPIO header. Fixes: 0e8ce93bdceb ("i2c: pca-platform: add devicetree awareness") Signed-off-by: Linus Walleij Reviewed-by: Chris Packham Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin