kernel/linux.git/drivers/i2c, branch v4.14.263

i2c: designware-pci: Fix to change data types of hcnt and lcnt parameters

2022-01-27T08:00:58+00:00

[ Upstream commit d52097010078c1844348dc0e467305e5f90fd317 ] The data type of hcnt and lcnt in the struct dw_i2c_dev is of type u16. It's better to have same data type in struct dw_scl_sda_cfg as well. Reported-by: Wolfram Sang Signed-off-by: Lakshmi Sowjanya D Signed-off-by: Andy Shevchenko Signed-off-by: Jarkko Nikula Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin

i2c: mpc: Correct I2C reset procedure

2022-01-27T08:00:58+00:00

[ Upstream commit ebe82cf92cd4825c3029434cabfcd2f1780e64be ] Current I2C reset procedure is broken in two ways: 1) It only generate 1 START instead of 9 STARTs and STOP. 2) It leaves the bus Busy so every I2C xfer after the first fixup calls the reset routine again, for every xfer there after. This fixes both errors. Signed-off-by: Joakim Tjernlund Acked-by: Scott Wood Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin

i2c: i801: Don't silently correct invalid transfer size

2022-01-27T08:00:58+00:00

[ Upstream commit effa453168a7eeb8a562ff4edc1dbf9067360a61 ] If an invalid block size is provided, reject it instead of silently changing it to a supported value. Especially critical I see the case of a write transfer with block length 0. In this case we have no guarantee that the byte we would write is valid. When silently reducing a read to 32 bytes then we don't return an error and the caller may falsely assume that we returned the full requested data. If this change should break any (broken) caller, then I think we should fix the caller. Signed-off-by: Heiner Kallweit Reviewed-by: Jean Delvare Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin

i2c: rk3x: Handle a spurious start completion interrupt flag

2021-12-22T08:17:58+00:00

[ Upstream commit 02fe0fbd8a21e183687925c3a266ae27dda9840f ] In a typical read transfer, start completion flag is being set after read finishes (notice ipd bit 4 being set): trasnfer poll=0 i2c start rk3x-i2c fdd40000.i2c: IRQ: state 1, ipd: 10 i2c read rk3x-i2c fdd40000.i2c: IRQ: state 2, ipd: 1b i2c stop rk3x-i2c fdd40000.i2c: IRQ: state 4, ipd: 33 This causes I2C transfer being aborted in polled mode from a stop completion handler: trasnfer poll=1 i2c start rk3x-i2c fdd40000.i2c: IRQ: state 1, ipd: 10 i2c read rk3x-i2c fdd40000.i2c: IRQ: state 2, ipd: 0 rk3x-i2c fdd40000.i2c: IRQ: state 2, ipd: 1b i2c stop rk3x-i2c fdd40000.i2c: IRQ: state 4, ipd: 13 i2c stop rk3x-i2c fdd40000.i2c: unexpected irq in STOP: 0x10 Clearing the START flag after read fixes the issue without any obvious side effects. This issue was dicovered on RK3566 when adding support for powering off the RK817 PMIC. Signed-off-by: Ondrej Jirman Reviewed-by: John Keeping Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin

i2c: xlr: Fix a resource leak in the error handling path of 'xlr_i2c_probe()'

2021-11-26T10:40:35+00:00

[ Upstream commit 7f98960c046ee1136e7096aee168eda03aef8a5d ] A successful 'clk_prepare()' call should be balanced by a corresponding 'clk_unprepare()' call in the error handling path of the probe, as already done in the remove function. More specifically, 'clk_prepare_enable()' is used, but 'clk_disable()' is also already called. So just the unprepare step has still to be done. Update the error handling path accordingly. Fixes: 75d31c2372e4 ("i2c: xlr: add support for Sigma Designs controller variant") Signed-off-by: Christophe JAILLET Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin

i2c: acpi: fix resource leak in reconfiguration device addition

2021-10-17T08:08:33+00:00

[ Upstream commit 6558b646ce1c2a872fe1c2c7cb116f05a2c1950f ] acpi_i2c_find_adapter_by_handle() calls bus_find_device() which takes a reference on the adapter which is never released which will result in a reference count leak and render the adapter unremovable. Make sure to put the adapter after creating the client in the same manner that we do for OF. Fixes: 525e6fabeae2 ("i2c / ACPI: add support for ACPI reconfigure notifications") Signed-off-by: Jamie Iles Acked-by: Mika Westerberg [wsa: fixed title] Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin

i2c: mt65xx: fix IRQ check

2021-09-22T09:45:22+00:00

[ Upstream commit 58fb7c643d346e2364404554f531cfa6a1a3917c ] Iff platform_get_irq() returns 0, the driver's probe() method will return 0 early (as if the method's call was successful). Let's consider IRQ0 valid for simplicity -- devm_request_irq() can always override that decision... Fixes: ce38815d39ea ("I2C: mediatek: Add driver for MediaTek I2C controller") Signed-off-by: Sergey Shtylyov Reviewed-by: Qii Wang Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin

i2c: s3c2410: fix IRQ check

2021-09-22T09:45:21+00:00

[ Upstream commit d6840a5e370b7ea4fde16ce2caf431bcc87f9a75 ] Iff platform_get_irq() returns 0, the driver's probe() method will return 0 early (as if the method's call was successful). Let's consider IRQ0 valid for simplicity -- devm_request_irq() can always override that decision... Fixes: e0d1ec97853f ("i2c-s3c2410: Change IRQ to be plain integer.") Signed-off-by: Sergey Shtylyov Reviewed-by: Krzysztof Kozlowski Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin

i2c: iop3xx: fix deferred probing

2021-09-22T09:45:21+00:00

[ Upstream commit a1299505162ad00def3573260c2c68b9c8e8d697 ] When adding the code to handle platform_get_irq*() errors in the commit 489447380a29 ("handle errors returned by platform_get_irq*()"), the actual error code was enforced to be -ENXIO in the driver for some strange reason. This didn't matter much until the deferred probing was introduced -- which requires an actual error code to be propagated upstream from the failure site. While fixing this, also stop overriding the errors from request_irq() to -EIO (done since the pre-git era). Fixes: 489447380a29 ("[PATCH] handle errors returned by platform_get_irq*()") Signed-off-by: Sergey Shtylyov Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin

i2c: highlander: add IRQ check

2021-09-22T09:45:20+00:00

[ Upstream commit f16a3bb69aa6baabf8f0aca982c8cf21e2a4f6bc ] The driver is written as if platform_get_irq() returns 0 on errors (while actually it returns a negative error code), blithely passing these error codes to request_irq() (which takes *unsigned* IRQ #) -- which fails with -EINVAL. Add the necessary error check to the pre-existing *if* statement forcing the driver into the polling mode... Fixes: 4ad48e6ab18c ("i2c: Renesas Highlander FPGA SMBus support") Signed-off-by: Sergey Shtylyov Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin