kernel/linux.git/drivers/i2c, branch linux-5.9.y

i2c: qup: Fix error return code in qup_i2c_bam_schedule_desc()

2020-12-11T12:22:12+00:00

commit e9acf0298c664f825e6f1158f2a97341bf9e03ca upstream. Fix to return the error code from qup_i2c_change_state() instaed of 0 in qup_i2c_bam_schedule_desc(). Fixes: fbf9921f8b35d9b2 ("i2c: qup: Fix error handling") Reported-by: Hulk Robot Signed-off-by: Zhihao Cheng Reviewed-by: Bjorn Andersson Signed-off-by: Wolfram Sang Signed-off-by: Greg Kroah-Hartman

i2c: qcom: Fix IRQ error misassignement

2020-12-11T12:22:12+00:00

commit 14718b3e129b058cb716a60c6faf40ef68661c54 upstream. During cci_isr() errors read from register fields belonging to i2c master1 are currently assigned to the status field belonging to i2c master0. This patch corrects this error, and always assigns master1 errors to the status field of master1. Fixes: e517526195de ("i2c: Add Qualcomm CCI I2C driver") Reported-by: Loic Poulain Suggested-by: Loic Poulain Signed-off-by: Robert Foss Reviewed-by: Manivannan Sadhasivam Signed-off-by: Wolfram Sang Signed-off-by: Greg Kroah-Hartman

i2c: imx: Don't generate STOP condition if arbitration has been lost

2020-12-11T12:22:07+00:00

commit 61e6fe59ede155881a622f5901551b1cc8748f6a upstream. If arbitration is lost, the master automatically changes to slave mode. I2SR_IBB may or may not be reset by hardware. Raising a STOP condition by resetting I2CR_MSTA has no effect and will not clear I2SR_IBB. So calling i2c_imx_bus_busy() is not required and would busy-wait until timeout. Signed-off-by: Christian Eggers Tested (not extensively) on Vybrid VF500 (Toradex VF50): Tested-by: Krzysztof Kozlowski Acked-by: Oleksij Rempel Cc: stable@vger.kernel.org # Requires trivial backporting, simple remove # the 3rd argument from the calls to # i2c_imx_bus_busy(). Signed-off-by: Wolfram Sang Signed-off-by: Greg Kroah-Hartman

i2c: imx: Check for I2SR_IAL after every byte

2020-12-11T12:22:07+00:00

commit 1de67a3dee7a279ebe4d892b359fe3696938ec15 upstream. Arbitration Lost (IAL) can happen after every single byte transfer. If arbitration is lost, the I2C hardware will autonomously switch from master mode to slave. If a transfer is not aborted in this state, consecutive transfers will not be executed by the hardware and will timeout. Signed-off-by: Christian Eggers Tested (not extensively) on Vybrid VF500 (Toradex VF50): Tested-by: Krzysztof Kozlowski Acked-by: Oleksij Rempel Cc: stable@vger.kernel.org Signed-off-by: Wolfram Sang Signed-off-by: Greg Kroah-Hartman

i2c: imx: Fix reset of I2SR_IAL flag

2020-12-11T12:22:07+00:00

commit 384a9565f70a876c2e78e58c5ca0bbf0547e4f6d upstream. According to the "VFxxx Controller Reference Manual" (and the comment block starting at line 97), Vybrid requires writing a one for clearing an interrupt flag. Syncing the method for clearing I2SR_IIF in i2c_imx_isr(). Signed-off-by: Christian Eggers Fixes: 4b775022f6fd ("i2c: imx: add struct to hold more configurable quirks") Reviewed-by: Uwe Kleine-König Acked-by: Oleksij Rempel Cc: stable@vger.kernel.org Signed-off-by: Wolfram Sang Signed-off-by: Greg Kroah-Hartman

i2c: designware: slave should do WRITE_REQUESTED before WRITE_RECEIVED

2020-11-18T18:22:15+00:00

[ Upstream commit 3b5f7f10ff6e6b66f553e12cc50d9bb751ce60ad ] Sometimes we would get the following flow when doing an i2cset: 0x1 STATUS SLAVE_ACTIVITY=0x1 : RAW_INTR_STAT=0x514 : INTR_STAT=0x4 I2C_SLAVE_WRITE_RECEIVED 0x1 STATUS SLAVE_ACTIVITY=0x0 : RAW_INTR_STAT=0x714 : INTR_STAT=0x204 I2C_SLAVE_WRITE_REQUESTED I2C_SLAVE_WRITE_RECEIVED Documentation/i2c/slave-interface.rst says that I2C_SLAVE_WRITE_REQUESTED, which is mandatory, should be sent while the data did not arrive yet. It means in a write-request I2C_SLAVE_WRITE_REQUESTED should be reported before any I2C_SLAVE_WRITE_RECEIVED. By the way, I2C_SLAVE_STOP didn't be reported in the above case because DW_IC_INTR_STAT was not 0x200. dev->status can be used to record the current state, especially Designware I2C controller has no interrupts to identify a write-request. This patch makes not only I2C_SLAVE_WRITE_REQUESTED been reported first when IC_INTR_RX_FULL is rising and dev->status isn't STATUS_WRITE_IN_PROGRESS but also I2C_SLAVE_STOP been reported when a STOP condition is received. Signed-off-by: Michael Wu Acked-by: Jarkko Nikula Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin

i2c: designware: call i2c_dw_read_clear_intrbits_slave() once

2020-11-18T18:22:15+00:00

[ Upstream commit 66b92313e2ca9208b5f3ebf5d86e9a818299d8fa ] If some bits were cleared by i2c_dw_read_clear_intrbits_slave() in i2c_dw_isr_slave() and not handled immediately, those cleared bits would not be shown again by later i2c_dw_read_clear_intrbits_slave(). They therefore were forgotten to be handled. i2c_dw_read_clear_intrbits_slave() should be called once in an ISR and take its returned state for all later handlings. Signed-off-by: Michael Wu Acked-by: Jarkko Nikula Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin

i2c: sh_mobile: implement atomic transfers

2020-11-18T18:22:14+00:00

[ Upstream commit a49cc1fe9d64a2dc4e19b599204f403e5d25f44b ] Implements atomic transfers to fix reboot/shutdown on r8a7790 Lager and similar boards. Signed-off-by: Ulrich Hecht Tested-by: Wolfram Sang Tested-by: Geert Uytterhoeven [wsa: some whitespace fixing] Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin

i2c: mediatek: move dma reset before i2c reset

2020-11-18T18:22:14+00:00

[ Upstream commit aafced673c06b7c77040c1df42e2e965be5d0376 ] The i2c driver default do dma reset after i2c reset, but sometimes i2c reset will trigger dma tx2rx, then apdma write data to dram which has been i2c_put_dma_safe_msg_buf(kfree). Move dma reset before i2c reset in mtk_i2c_init_hw to fix it. Signed-off-by: Qii Wang Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin

i2c: imx: Fix external abort on interrupt in exit paths

2020-11-05T10:51:48+00:00

commit e50e4f0b85be308a01b830c5fbdffc657e1a6dd0 upstream. If interrupt comes late, during probe error path or device remove (could be triggered with CONFIG_DEBUG_SHIRQ), the interrupt handler i2c_imx_isr() will access registers with the clock being disabled. This leads to external abort on non-linefetch on Toradex Colibri VF50 module (with Vybrid VF5xx): Unhandled fault: external abort on non-linefetch (0x1008) at 0x8882d003 Internal error: : 1008 [#1] ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 5.7.0 #607 Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree) (i2c_imx_isr) from [<8017009c>] (free_irq+0x25c/0x3b0) (free_irq) from [<805844ec>] (release_nodes+0x178/0x284) (release_nodes) from [<80580030>] (really_probe+0x10c/0x348) (really_probe) from [<80580380>] (driver_probe_device+0x60/0x170) (driver_probe_device) from [<80580630>] (device_driver_attach+0x58/0x60) (device_driver_attach) from [<805806bc>] (__driver_attach+0x84/0xc0) (__driver_attach) from [<8057e228>] (bus_for_each_dev+0x68/0xb4) (bus_for_each_dev) from [<8057f3ec>] (bus_add_driver+0x144/0x1ec) (bus_add_driver) from [<80581320>] (driver_register+0x78/0x110) (driver_register) from [<8010213c>] (do_one_initcall+0xa8/0x2f4) (do_one_initcall) from [<80c0100c>] (kernel_init_freeable+0x178/0x1dc) (kernel_init_freeable) from [<80807048>] (kernel_init+0x8/0x110) (kernel_init) from [<80100114>] (ret_from_fork+0x14/0x20) Additionally, the i2c_imx_isr() could wake up the wait queue (imx_i2c_struct->queue) before its initialization happens. The resource-managed framework should not be used for interrupt handling, because the resource will be released too late - after disabling clocks. The interrupt handler is not prepared for such case. Fixes: 1c4b6c3bcf30 ("i2c: imx: implement bus recovery") Cc: Signed-off-by: Krzysztof Kozlowski Acked-by: Oleksij Rempel Signed-off-by: Wolfram Sang Signed-off-by: Greg Kroah-Hartman