kernel/linux.git/drivers/i2c, branch linux-5.11.y

i2c: mediatek: Fix send master code at more than 1MHz

2021-05-19T08:30:02+00:00

commit 63ce8e3df8f6deca2da52eaf064751ad4018b46e upstream. There are some omissions in the previous patch about replacing I2C_MAX_FAST_MODE__FREQ with I2C_MAX_FAST_MODE_PLUS_FREQ and need to fix it. Fixes: b44658e755b5("i2c: mediatek: Send i2c master code at more than 1MHz") Signed-off-by: Qii Wang Signed-off-by: Wolfram Sang Signed-off-by: Greg Kroah-Hartman

i2c: imx: Fix PM reference leak in i2c_imx_reg_slave()

2021-05-19T08:29:32+00:00

[ Upstream commit c4b1fcc310e655fa8414696c38a84d36c00684c8 ] pm_runtime_get_sync() will increment the PM reference count even on failure. Forgetting to put the reference again will result in a leak. Replace it with pm_runtime_resume_and_get() to keep the usage counter balanced. Reported-by: Hulk Robot Signed-off-by: Ye Weihua Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin

i2c: bail out early when RDWR parameters are wrong

2021-05-19T08:29:28+00:00

[ Upstream commit 71581562ee36032d2d574a9b23ad4af6d6a64cf7 ] The buggy parameters currently get caught later, but emit a noisy WARN. Userspace should not be able to trigger this, so add similar checks much earlier. Also avoids some unneeded code paths, of course. Apply kernel coding stlye to a comment while here. Reported-by: syzbot+ffb0b3ffa6cfbc7d7b3f@syzkaller.appspotmail.com Tested-by: syzbot+ffb0b3ffa6cfbc7d7b3f@syzkaller.appspotmail.com Signed-off-by: Wolfram Sang Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin

i2c: mediatek: Fix wrong dma sync flag

2021-05-14T08:50:12+00:00

[ Upstream commit 3186b880447ad3cc9b6487fa626a71d64b831524 ] The right flag is apdma_sync when apdma remove hand-shake signel. Fixes: 05f6f7271a38 ("i2c: mediatek: Fix apdma and i2c hand-shake timeout") Signed-off-by: Qii Wang Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin

i2c: sh7760: fix IRQ error path

2021-05-14T08:50:12+00:00

[ Upstream commit 92dfb27240fea2776f61c5422472cb6defca7767 ] While adding the invalid IRQ check after calling platform_get_irq(), I managed to overlook that the driver has a complex error path in its probe() method, thus a simple *return* couldn't be used. Use a proper *goto* instead! Fixes: e5b2e3e74201 ("i2c: sh7760: add IRQ check") Signed-off-by: Sergey Shtylyov Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin

i2c: sh7760: add IRQ check

2021-05-14T08:50:10+00:00

[ Upstream commit e5b2e3e742015dd2aa6bc7bcef2cb59b2de1221c ] The driver neglects to check the result of platform_get_irq()'s call and blithely passes the negative error codes to devm_request_irq() (which takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding an original error code. Stop calling devm_request_irq() with invalid IRQ #s. Fixes: a26c20b1fa6d ("i2c: Renesas SH7760 I2C master driver") Signed-off-by: Sergey Shtylyov Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin

i2c: rcar: add IRQ check

2021-05-14T08:50:10+00:00

[ Upstream commit 147178cf03a6dcb337e703d4dacd008683022a58 ] The driver neglects to check the result of platform_get_irq()'s call and blithely passes the negative error codes to devm_request_irq() (which takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding an original error code. Stop calling devm_request_irq() with the invalid IRQ #s. Fixes: 6ccbe607132b ("i2c: add Renesas R-Car I2C driver") Signed-off-by: Sergey Shtylyov Reviewed-by: Geert Uytterhoeven Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin

i2c: rcar: protect against supurious interrupts on V3U

2021-05-14T08:50:10+00:00

[ Upstream commit 9c975c432bc0aa53a90438fc80b369cb35134a48 ] V3U creates spurious interrupts which we need to handle. This costs time until BUS_PHASE_DATA can be activated which is problematic for Gen2 SoCs and earlier. Because of this we introduce two interrupt handlers here which will call a generic main irq function once the timing critical stuff is done. Signed-off-by: Wolfram Sang Reviewed-by: Niklas Söderlund Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin

i2c: rcar: make sure irq is not threaded on Gen2 and earlier

2021-05-14T08:50:10+00:00

[ Upstream commit 24c6d4bc563881539d2cd4433e502436ad87d512 ] Ensure this irq runs as fast as possible. Signed-off-by: Wolfram Sang Reviewed-by: Niklas Söderlund Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin

i2c: mlxbf: add IRQ check

2021-05-14T08:50:10+00:00

[ Upstream commit 0d3bf53e897dce943b98d975bbde77156af6cd81 ] The driver neglects to check the result of platform_get_irq()'s call and blithely passes the negative error codes to devm_request_irq() (which takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding an original error code. Stop calling devm_request_irq() with invalid IRQ #s. Fixes: b5b5b32081cd ("i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC") Signed-off-by: Sergey Shtylyov Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin