kernel/linux.git/drivers/i2c/busses, branch v6.3.2

i2c: xiic: xiic_xfer(): Fix runtime PM leak on error path

2023-05-11T14:17:27+00:00

[ Upstream commit d663d93bb47e7ab45602b227701022d8aa16040a ] The xiic_xfer() function gets a runtime PM reference when the function is entered. This reference is released when the function is exited. There is currently one error path where the function exits directly, which leads to a leak of the runtime PM reference. Make sure that this error path also releases the runtime PM reference. Fixes: fdacc3c7405d ("i2c: xiic: Switch from waitqueue to completion") Signed-off-by: Lars-Peter Clausen Reviewed-by: Michal Simek Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin

i2c: cadence: cdns_i2c_master_xfer(): Fix runtime PM leak on error path

2023-05-11T14:17:27+00:00

[ Upstream commit ae1664f04f504a998737f5bb563f16b44357bcca ] The cdns_i2c_master_xfer() function gets a runtime PM reference when the function is entered. This reference is released when the function is exited. There is currently one error path where the function exits directly, which leads to a leak of the runtime PM reference. Make sure that this error path also releases the runtime PM reference. Fixes: 1a351b10b967 ("i2c: cadence: Added slave support") Signed-off-by: Lars-Peter Clausen Reviewed-by: Michal Simek Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin

i2c: omap: Fix standard mode false ACK readings

2023-05-11T14:16:52+00:00

commit c770657bd2611b077ec1e7b1fe6aa92f249399bd upstream. Using standard mode, rare false ACK responses were appearing with i2cdetect tool. This was happening due to NACK interrupt triggering ISR thread before register access interrupt was ready. Removing the NACK interrupt's ability to trigger ISR thread lets register access ready interrupt do this instead. Cc: # v3.7+ Fixes: 3b2f8f82dad7 ("i2c: omap: switch to threaded IRQ support") Signed-off-by: Reid Tonking Acked-by: Vignesh Raghavendra Reviewed-by: Tony Lindgren Signed-off-by: Wolfram Sang Signed-off-by: Greg Kroah-Hartman

i2c: ocores: generate stop condition after timeout in polling mode

2023-04-13T16:29:29+00:00

In polling mode, no stop condition is generated after a timeout. This causes SCL to remain low and thereby block the bus. If this happens during a transfer it can cause slaves to misinterpret the subsequent transfer and return wrong values. To solve this, pass the ETIMEDOUT error up from ocores_process_polling() instead of setting STATE_ERROR directly. The caller is adjusted to call ocores_process_timeout() on error both in polling and in IRQ mode, which will set STATE_ERROR and generate a stop condition. Fixes: 69c8c0c0efa8 ("i2c: ocores: add polling interface") Signed-off-by: Gregor Herburger Signed-off-by: Matthias Schiffer Acked-by: Peter Korsgaard Reviewed-by: Andrew Lunn Reviewed-by: Federico Vaga Signed-off-by: Wolfram Sang

i2c: mchp-pci1xxxx: Update Timing registers

2023-03-29T19:12:06+00:00

Update I2C timing registers based on latest hardware design. This fix does not break functionality of chips with older design and existing users will not be affected. Fixes: 361693697249 ("i2c: microchip: pci1xxxx: Add driver for I2C host controller in multifunction endpoint of pci1xxxx switch") Signed-off-by: Tharun Kumar P Reviewed-by: Andy Shevchenko Signed-off-by: Wolfram Sang

i2c: xgene-slimpro: Fix out-of-bounds bug in xgene_slimpro_i2c_xfer()

2023-03-16T20:15:43+00:00

The data->block[0] variable comes from user and is a number between 0-255. Without proper check, the variable may be very large to cause an out-of-bounds when performing memcpy in slimpro_i2c_blkwr. Fix this bug by checking the value of writelen. Fixes: f6505fbabc42 ("i2c: add SLIMpro I2C device driver on APM X-Gene platform") Signed-off-by: Wei Chen Cc: stable@vger.kernel.org Reviewed-by: Andi Shyti Signed-off-by: Wolfram Sang

i2c: hisi: Only use the completion interrupt to finish the transfer

2023-03-16T20:02:15+00:00

The controller will always generate a completion interrupt when the transfer is finished normally or not. Currently we use either error or completion interrupt to finish, this may result the completion interrupt unhandled and corrupt the next transfer, especially at low speed mode. Since on error case, the error interrupt will come first then is the completion interrupt. So only use the completion interrupt to finish the whole transfer process. Fixes: d62fbdb99a85 ("i2c: add support for HiSilicon I2C controller") Reported-by: Sheng Feng Signed-off-by: Sheng Feng Signed-off-by: Yicong Yang Signed-off-by: Wolfram Sang

i2c: hisi: Avoid redundant interrupts

2023-03-16T20:00:47+00:00

After issuing all the messages we can disable the TX_EMPTY interrupts to avoid handling redundant interrupts. For doing a sinlge bus detection (i2cdetect -y -r 0) we can reduce ~97% interrupts (before ~12000 after ~400). Signed-off-by: Sheng Feng Signed-off-by: Yicong Yang Signed-off-by: Wolfram Sang

i2c: mxs: ensure that DMA buffers are safe for DMA

2023-03-16T19:47:32+00:00

We found that after commit 9c46929e7989 ("ARM: implement THREAD_INFO_IN_TASK for uniprocessor systems"), the PCF85063 RTC driver stopped working on i.MX28 due to regmap_bulk_read() reading bogus data into a stack buffer. This is caused by the i2c-mxs driver using DMA transfers even for messages without the I2C_M_DMA_SAFE flag, and the aforementioned commit enabling vmapped stacks. As the MXS I2C controller requires DMA for reads of >4 bytes, DMA can't be disabled, so the issue is fixed by using i2c_get_dma_safe_msg_buf() to create a bounce buffer when needed. Fixes: 9c46929e7989 ("ARM: implement THREAD_INFO_IN_TASK for uniprocessor systems") Signed-off-by: Matthias Schiffer Signed-off-by: Wolfram Sang

i2c: imx-lpi2c: check only for enabled interrupt flags

2023-03-16T19:35:57+00:00

When reading from I2C, the Tx watermark is set to 0. Unfortunately the TDF (transmit data flag) is enabled when Tx FIFO entries is equal or less than watermark. So it is set in every case, hence the reset default of 1. This results in the MSR_RDF _and_ MSR_TDF flags to be set thus trying to send Tx data on a read message. Mask the IRQ status to filter for wanted flags only. Fixes: a55fa9d0e42e ("i2c: imx-lpi2c: add low power i2c bus driver") Signed-off-by: Alexander Stein Tested-by: Emanuele Ghidoli Signed-off-by: Wolfram Sang