kernel/linux.git/drivers/hwmon, branch v6.6.141

hwmon: (corsair-psu) Close HID device on probe errors

2026-05-17T15:13:39+00:00

commit 174606451fbb17db506ebaacdd5e203e57773d5f upstream. corsairpsu_probe() opens the HID device before sending the device init and firmware-info commands. If either command fails, the error path jumps directly to fail_and_stop and skips hid_hw_close(). Use the existing fail_and_close label for those post-open failures so the open count and low-level close callback are balanced before hid_hw_stop(). Fixes: d115b51e0e56 ("hwmon: add Corsair PSU HID controller driver") Cc: stable@vger.kernel.org Signed-off-by: Myeonghun Pak Reviewed-by: Wilken Gottwalt Link: https://lore.kernel.org/r/20260424135107.13720-1-mhun512@gmail.com Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman

hwmon: (ltc2992) Fix u32 overflow in power read path

2026-05-17T15:13:39+00:00

commit 2da0c1fd01dbd6b22844e8676585153dfc660cbe upstream. ltc2992_get_power() computes the divisor for mul_u64_u32_div() as r_sense_uohm * 1000. This multiplication overflows u32 when r_sense_uohm exceeds about 4.29 ohms (4294967 micro-ohms), producing a truncated divisor and an incorrect power reading. Cancel the factor of 1000 from both the numerator (VADC_UV_LSB * IADC_NANOV_LSB = 312500000) and the divisor (r_sense_uohm * 1000), giving (VADC_UV_LSB / 1000) * IADC_NANOV_LSB = 312500 as the numerator and plain r_sense_uohm as the divisor. The cancellation is exact because LTC2992_VADC_UV_LSB (25000) is divisible by 1000. This is the read-path counterpart of the write-path fix applied in the preceding patch. Fixes: b0bd407e94b03 ("hwmon: (ltc2992) Add support") Cc: stable@vger.kernel.org Signed-off-by: Sanman Pradhan Link: https://lore.kernel.org/r/20260416215904.101969-3-sanman.pradhan@hpe.com Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman

hwmon: (ltc2992) Clamp threshold writes to hardware range

2026-05-17T15:13:39+00:00

commit d6cc7c99bf1f73eda7d565d224d791d16239bb41 upstream. ltc2992_set_voltage(), ltc2992_set_current(), and ltc2992_set_power() do not validate the user-supplied value before converting it to a register value. This can result in: 1. Negative input values wrapping to large positive register values. For power, the negative long is implicitly cast to u64 in mul_u64_u32_div(), producing an incorrect value. For voltage and current, the negative converted value wraps when passed to ltc2992_write_reg() as a u32. 2. Intermediate arithmetic exceeding the range representable in u64 on 64-bit platforms. In ltc2992_set_voltage(), (u64)val * 1000 can exceed U64_MAX when val is a large positive long. In ltc2992_set_current(), (u64)val * r_sense_uohm can overflow similarly. In ltc2992_set_power(), the computed value may not fit in u64. 3. Register values exceeding the hardware field width. Voltage and current threshold registers are 12-bit (stored left-justified in 16 bits), and power threshold registers are 24-bit. Without clamping, bits above the field width are truncated in ltc2992_write_reg(). Fix by clamping negative values to zero, clamping positive values to the rounded hardware-representable maximum (the value returned by the read path for a full-scale register) to prevent intermediate overflow, and clamping the converted register value to the hardware field width before writing. The existing conversion formula and rounding behavior are preserved. In the power write path, cancel the factor of 1000 from both the numerator (r_sense_uohm * 1000) and the denominator (VADC_UV_LSB * IADC_NANOV_LSB) to also eliminate a u32 overflow of r_sense_uohm * 1000 when r_sense_uohm exceeds about 4.29 ohms. Fixes: b0bd407e94b03 ("hwmon: (ltc2992) Add support") Cc: stable@vger.kernel.org Signed-off-by: Sanman Pradhan Link: https://lore.kernel.org/r/20260416215904.101969-2-sanman.pradhan@hpe.com Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman

hwmon: (occ) Fix division by zero in occ_show_power_1()

2026-04-11T12:19:27+00:00

commit 39e2a5bf970402a8530a319cf06122e216ba57b8 upstream. In occ_show_power_1() case 1, the accumulator is divided by update_tag without checking for zero. If no samples have been collected yet (e.g. during early boot when the sensor block is included but hasn't been updated), update_tag is zero, causing a kernel divide-by-zero crash. The 2019 fix in commit 211186cae14d ("hwmon: (occ) Fix division by zero issue") only addressed occ_get_powr_avg() used by occ_show_power_2() and occ_show_power_a0(). This separate code path in occ_show_power_1() was missed. Fix this by reusing the existing occ_get_powr_avg() helper, which already handles the zero-sample case and uses mul_u64_u32_div() to multiply before dividing for better precision. Move the helper above occ_show_power_1() so it is visible at the call site. Fixes: c10e753d43eb ("hwmon (occ): Add sensor types and versions") Cc: stable@vger.kernel.org Signed-off-by: Sanman Pradhan Link: https://lore.kernel.org/r/20260326224510.294619-2-sanman.pradhan@hpe.com [groeck: Fix alignment problems reported by checkpatch] Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman

hwmon: (occ) Fix missing newline in occ_show_extended()

2026-04-11T12:19:25+00:00

[ Upstream commit 09773978879ecf71a7990fe9a28ce4eb92bce645 ] In occ_show_extended() case 0, when the EXTN_FLAG_SENSOR_ID flag is set, the sysfs_emit format string "%u" is missing the trailing newline that the sysfs ABI expects. The else branch correctly uses "%4phN\n", and all other show functions in this file include the trailing newline. Add the missing "\n" for consistency and correct sysfs output. Fixes: c10e753d43eb ("hwmon (occ): Add sensor types and versions") Signed-off-by: Sanman Pradhan Link: https://lore.kernel.org/r/20260326224510.294619-3-sanman.pradhan@hpe.com Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin

hwmon: (tps53679) Fix device ID comparison and printing in tps53676_identify()

2026-04-11T12:19:25+00:00

[ Upstream commit ca34ee6d0307a0b4e52c870dfc1bb8a3c3eb956e ] tps53676_identify() uses strncmp() to compare the device ID buffer against a byte sequence containing embedded non-printable bytes (\x53\x67\x60). strncmp() is semantically wrong for binary data comparison; use memcmp() instead. Additionally, the buffer from i2c_smbus_read_block_data() is not NUL-terminated, so printing it with "%s" in the error path is undefined behavior and may read past the buffer. Use "%*ph" to hex-dump the actual bytes returned. Per the datasheet, the expected device ID is the 6-byte sequence 54 49 53 67 60 00 ("TI\x53\x67\x60\x00"), so compare all 6 bytes including the trailing NUL. Fixes: cb3d37b59012 ("hwmon: (pmbus/tps53679) Add support for TI TPS53676") Signed-off-by: Sanman Pradhan Link: https://lore.kernel.org/r/20260330155618.77403-1-sanman.pradhan@hpe.com Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin

hwmon: (pxe1610) Check return value of page-select write in probe

2026-04-11T12:19:25+00:00

[ Upstream commit ccf70c41e562b29d1c05d1bbf53391785e09c6fb ] pxe1610_probe() writes PMBUS_PAGE to select page 0 but does not check the return value. If the write fails, subsequent register reads operate on an indeterminate page, leading to silent misconfiguration. Check the return value and propagate the error using dev_err_probe(), which also handles -EPROBE_DEFER correctly without log spam. Fixes: 344757bac526 ("hwmon: (pmbus) Add Infineon PXE1610 VR driver") Signed-off-by: Sanman Pradhan Link: https://lore.kernel.org/r/20260329170925.34581-4-sanman.pradhan@hpe.com [groeck: Fix "Fixes" SHA] Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin

hwmon: (peci/cputemp) Fix off-by-one in cputemp_is_visible()

2026-04-02T11:07:25+00:00

commit b0c9d8ae71509f25690d57f2efddebf7f4b12194 upstream. cputemp_is_visible() validates the channel index against CPUTEMP_CHANNEL_NUMS, but currently uses '>' instead of '>='. As a result, channel == CPUTEMP_CHANNEL_NUMS is not rejected even though valid indices are 0 .. CPUTEMP_CHANNEL_NUMS - 1. Fix the bounds check by using '>=' so invalid channel indices are rejected before indexing the core bitmap. Fixes: bf3608f338e9 ("hwmon: peci: Add cputemp driver") Cc: stable@vger.kernel.org Signed-off-by: Sanman Pradhan Link: https://lore.kernel.org/r/20260323002352.93417-3-sanman.pradhan@hpe.com Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman

hwmon: (peci/cputemp) Fix crit_hyst returning delta instead of absolute temperature

2026-04-02T11:07:25+00:00

commit 0adc752b4f7d82af7bd14f7cad3091b3b5d702ba upstream. The hwmon sysfs ABI expects tempN_crit_hyst to report the temperature at which the critical condition clears, not the hysteresis delta from the critical limit. The peci cputemp driver currently returns tjmax - tcontrol for crit_hyst_type, which is the hysteresis margin rather than the corresponding absolute temperature. Return tcontrol directly, and update the documentation accordingly. Fixes: bf3608f338e9 ("hwmon: peci: Add cputemp driver") Cc: stable@vger.kernel.org Signed-off-by: Sanman Pradhan Link: https://lore.kernel.org/r/20260323002352.93417-2-sanman.pradhan@hpe.com Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman

hwmon: (pmbus/isl68137) Add mutex protection for AVS enable sysfs attributes

2026-04-02T11:07:25+00:00

commit 3075a3951f7708da5a8ab47b0b7d068a32f69e58 upstream. The custom avs0_enable and avs1_enable sysfs attributes access PMBus registers through the exported API helpers (pmbus_read_byte_data, pmbus_read_word_data, pmbus_write_word_data, pmbus_update_byte_data) without holding the PMBus update_lock mutex. These exported helpers do not acquire the mutex internally, unlike the core's internal callers which hold the lock before invoking them. The store callback is especially vulnerable: it performs a multi-step read-modify-write sequence (read VOUT_COMMAND, write VOUT_COMMAND, then update OPERATION) where concurrent access from another thread could interleave and corrupt the register state. Add pmbus_lock_interruptible()/pmbus_unlock() around both the show and store callbacks to serialize PMBus register access with the rest of the driver. Fixes: 038a9c3d1e424 ("hwmon: (pmbus/isl68137) Add driver for Intersil ISL68137 PWM Controller") Cc: stable@vger.kernel.org Signed-off-by: Sanman Pradhan Link: https://lore.kernel.org/r/20260319173055.125271-3-sanman.pradhan@hpe.com Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman