kernel/linux.git/drivers/hwmon, branch v4.4.171

hwmon: (w83795) temp4_type has writable permission

2018-12-17T20:55:10+00:00

[ Upstream commit 09aaf6813cfca4c18034fda7a43e68763f34abb1 ] Both datasheet and comments of store_temp_mode() tell us that temp1~4_type is writable, so fix it. Signed-off-by: Yao Wang Signed-off-by: Huacai Chen Fixes: 39deb6993e7c (" hwmon: (w83795) Simplify temperature sensor type handling") Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin

hwmon: (ina2xx) Fix current value calculation

2018-12-17T20:55:10+00:00

[ Upstream commit 38cd989ee38c16388cde89db5b734f9d55b905f9 ] The current register (04h) has a sign bit at MSB. The comments for this calculation also mention that it's a signed register. However, the regval is unsigned type so result of calculation turns out to be an incorrect value when current is negative. This patch simply fixes this by adding a casting to s16. Fixes: 5d389b125186c ("hwmon: (ina2xx) Make calibration register value fixed") Signed-off-by: Nicolin Chen Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin

hwmon: (ibmpowernv) Remove bogus __init annotations

2018-11-27T15:08:01+00:00

[ Upstream commit e3e61f01d755188cb6c2dcf5a244b9c0937c258e ] If gcc decides not to inline make_sensor_label(): WARNING: vmlinux.o(.text+0x4df549c): Section mismatch in reference from the function .create_device_attrs() to the function .init.text:.make_sensor_label() The function .create_device_attrs() references the function __init .make_sensor_label(). This is often because .create_device_attrs lacks a __init annotation or the annotation of .make_sensor_label is wrong. As .probe() can be called after freeing of __init memory, all __init annotiations in the driver are bogus, and should be removed. Signed-off-by: Geert Uytterhoeven Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin

hwmon: (pmbus) Fix page count auto-detection.

2018-11-21T08:27:30+00:00

commit e7c6a55606b5c46b449d76588968b4d8caae903f upstream. Devices with compatible="pmbus" field have zero initial page count, and pmbus_clear_faults() being called before the page count auto- detection does not actually clear faults because it depends on the page count. Non-cleared faults in its turn may fail the subsequent page count auto-detection. This patch fixes this problem by calling pmbus_clear_fault_page() for currently set page and calling pmbus_clear_faults() after the page count was detected. Cc: stable@vger.kernel.org Signed-off-by: Dmitry Bazhenov Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman

hwmon: (adt7475) Make adt7475_read_word() return errors

2018-10-10T06:52:09+00:00

[ Upstream commit f196dec6d50abb2e65fb54a0621b2f1b4d922995 ] The adt7475_read_word() function was meant to return negative error codes on failure. Signed-off-by: Dan Carpenter Reviewed-by: Tokunori Ikegami Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

hwmon: (ina2xx) fix sysfs shunt resistor read access

2018-10-10T06:52:09+00:00

[ Upstream commit 3ad867001c91657c46dcf6656d52eb6080286fd5 ] fix the sysfs shunt resistor read access: return the shunt resistor value, not the calibration register contents. update email address Signed-off-by: Lothar Felten Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

hwmon: (pmbus/adm1275) Accept negative page register values

2018-05-30T05:49:13+00:00

[ Upstream commit ecb29abd4cb0670c616fb563a078f25d777ce530 ] A negative page register value means that no page needs to be selected. This is used by status register read operations and needs to be accepted. The failure to do so so results in missed status and limit registers. Fixes: da8e48ab483e1 ("hwmon: (pmbus) Always call _pmbus_read_byte in core driver") Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

hwmon: (pmbus/max8688) Accept negative page register values

2018-05-30T05:49:13+00:00

[ Upstream commit a46f8cd696624ef757be0311eb28f119c36778e8 ] A negative page register value means that no page needs to be selected. This is used by status register evaluations and needs to be accepted. Fixes: da8e48ab483e1 ("hwmon: (pmbus) Always call _pmbus_read_byte in core driver") Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

hwmon: (nct6775) Fix writing pwmX_mode

2018-05-30T05:49:10+00:00

[ Upstream commit 415eb2a1aaa4881cf85bd86c683356fdd8094a23 ] pwmX_mode is defined in the ABI as 0=DC mode, 1=pwm mode. The chip register bit is set to 1 for DC mode. This got mixed up, and writing 1 into pwmX_mode resulted in DC mode enabled. Fix it up by using the ABI definition throughout the driver for consistency. Fixes: 77eb5b3703d99 ("hwmon: (nct6775) Add support for pwm, pwm_mode, ... ") Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

hwmon: (ina2xx) Fix access to uninitialized mutex

2018-04-24T07:32:04+00:00

commit 0c4c5860e9983eb3da7a3d73ca987643c3ed034b upstream. Initialize data->config_lock mutex before it is used by the driver code. This fixes following warning on Odroid XU3 boards: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 5 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc7-next-20180115-00001-gb75575dee3f2 #107 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [] (show_stack) from [] (dump_stack+0x90/0xc8) [] (dump_stack) from [] (register_lock_class+0x1c0/0x59c) [] (register_lock_class) from [] (__lock_acquire+0x78/0x1850) [] (__lock_acquire) from [] (lock_acquire+0xc8/0x2b8) [] (lock_acquire) from [] (__mutex_lock+0x60/0xa0c) [] (__mutex_lock) from [] (mutex_lock_nested+0x1c/0x24) [] (mutex_lock_nested) from [] (ina2xx_set_shunt+0x70/0xb0) [] (ina2xx_set_shunt) from [] (ina2xx_probe+0x88/0x1b0) [] (ina2xx_probe) from [] (i2c_device_probe+0x1e0/0x2d0) [] (i2c_device_probe) from [] (driver_probe_device+0x2b8/0x4a0) [] (driver_probe_device) from [] (__driver_attach+0xfc/0x120) [] (__driver_attach) from [] (bus_for_each_dev+0x58/0x7c) [] (bus_for_each_dev) from [] (bus_add_driver+0x174/0x250) [] (bus_add_driver) from [] (driver_register+0x78/0xf4) [] (driver_register) from [] (i2c_register_driver+0x38/0xa8) [] (i2c_register_driver) from [] (do_one_initcall+0x48/0x18c) [] (do_one_initcall) from [] (kernel_init_freeable+0x110/0x1d4) [] (kernel_init_freeable) from [] (kernel_init+0x8/0x114) [] (kernel_init) from [] (ret_from_fork+0x14/0x20) Fixes: 5d389b125186 ("hwmon: (ina2xx) Make calibration register value fixed") Signed-off-by: Marek Szyprowski Signed-off-by: Guenter Roeck [backport to v4.4.y/v4.9.y: context changes] Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman