kernel/linux.git/drivers/hwmon, branch v4.19.112

hwmon: (adt7462) Fix an error return in ADT7462_REG_VOLT()

2020-03-11T13:15:12+00:00

commit 44f2f882909fedfc3a56e4b90026910456019743 upstream. This is only called from adt7462_update_device(). The caller expects it to return zero on error. I fixed a similar issue earlier in commit a4bf06d58f21 ("hwmon: (adt7462) ADT7462_REG_VOLT_MAX() should return 0") but I missed this one. Fixes: c0b4e3ab0c76 ("adt7462: new hwmon driver") Signed-off-by: Dan Carpenter Reviewed-by: Darrick J. Wong Link: https://lore.kernel.org/r/20200303101608.kqjwfcazu2ylhi2a@kili.mountain Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman

hwmon: (pmbus/ltc2978) Fix PMBus polling of MFR_COMMON definitions.

2020-02-19T18:51:59+00:00

commit cf2b012c90e74e85d8aea7d67e48868069cfee0c upstream. Change 21537dc driver PMBus polling of MFR_COMMON from bits 5/4 to bits 6/5. This fixs a LTC297X family bug where polling always returns not busy even when the part is busy. This fixes a LTC388X and LTM467X bug where polling used PEND and NOT_IN_TRANS, and BUSY was not polled, which can lead to NACKing of commands. LTC388X and LTM467X modules now poll BUSY and PEND, increasing reliability by eliminating NACKing of commands. Signed-off-by: Mike Jones Link: https://lore.kernel.org/r/1580234400-2829-2-git-send-email-michael-a1.jones@analog.com Fixes: e04d1ce9bbb49 ("hwmon: (ltc2978) Add polling for chips requiring it") Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman

hwmon: (nct7802) Fix voltage limits to wrong registers

2020-01-29T15:43:21+00:00

commit 7713e62c8623c54dac88d1fa724aa487a38c3efb upstream. in0 thresholds are written to the in2 thresholds registers in2 thresholds to in3 thresholds in3 thresholds to in4 thresholds in4 thresholds to in0 thresholds Signed-off-by: Gilles Buloz Link: https://lore.kernel.org/r/5de0f509.rc0oEvPOMjbfPW1w%gilles.buloz@kontron.com Fixes: 3434f3783580 ("hwmon: Driver for Nuvoton NCT7802Y") Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman

hwmon: (core) Do not use device managed functions for memory allocations

2020-01-29T15:43:18+00:00

commit 3bf8bdcf3bada771eb12b57f2a30caee69e8ab8d upstream. The hwmon core uses device managed functions, tied to the hwmon parent device, for various internal memory allocations. This is problematic since hwmon device lifetime does not necessarily match its parent's device lifetime. If there is a mismatch, memory leaks will accumulate until the parent device is released. Fix the problem by managing all memory allocations internally. The only exception is memory allocation for thermal device registration, which can be tied to the hwmon device, along with thermal device registration itself. Fixes: d560168b5d0f ("hwmon: (core) New hwmon registration API") Cc: stable@vger.kernel.org # v4.14.x: 47c332deb8e8: hwmon: Deal with errors from the thermal subsystem Cc: stable@vger.kernel.org # v4.14.x: 74e3512731bd: hwmon: (core) Fix double-free in __hwmon_device_register() Cc: stable@vger.kernel.org # v4.9.x: 3a412d5e4a1c: hwmon: (core) Simplify sysfs attribute name allocation Cc: stable@vger.kernel.org # v4.9.x: 47c332deb8e8: hwmon: Deal with errors from the thermal subsystem Cc: stable@vger.kernel.org # v4.9.x: 74e3512731bd: hwmon: (core) Fix double-free in __hwmon_device_register() Cc: stable@vger.kernel.org # v4.9+ Cc: Martin K. Petersen Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman

hwmon: (adt7475) Make volt2reg return same reg as reg2volt input

2020-01-29T15:43:18+00:00

commit cf3ca1877574a306c0207cbf7fdf25419d9229df upstream. reg2volt returns the voltage that matches a given register value. Converting this back the other way with volt2reg didn't return the same register value because it used truncation instead of rounding. This meant that values read from sysfs could not be written back to sysfs to set back the same register value. With this change, volt2reg will return the same value for every voltage previously returned by reg2volt (for the set of possible input values) Signed-off-by: Luuk Paulussen Link: https://lore.kernel.org/r/20191205231659.1301-1-luuk.paulussen@alliedtelesis.co.nz cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman

hwmon: (shtc1) fix shtc1 and shtw1 id mask

2020-01-27T13:51:12+00:00

[ Upstream commit fdc7d8e829ec755c5cfb2f5a8d8c0cdfb664f895 ] Fix an error in the bitmaskfor the shtc1 and shtw1 bitmask used to retrieve the chip ID from the ID register. See section 5.7 of the shtw1 or shtc1 datasheet for details. Fixes: 1a539d372edd9832444e7a3daa710c444c014dc9 ("hwmon: add support for Sensirion SHTC1 sensor") Signed-off-by: Dan Robertson Link: https://lore.kernel.org/r/20190905014554.21658-3-dan@dlrobertson.com [groeck: Reordered to be first in series and adjusted accordingly] Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin

hwmon: (lm75) Fix write operations for negative temperatures

2020-01-27T13:51:08+00:00

[ Upstream commit 7d82fcc9d9e81241778aaa22fda7be753e237d86 ] Writes into limit registers fail if the temperature written is negative. The regmap write operation checks the value range, regmap_write accepts an unsigned int as parameter, and the temperature value passed to regmap_write is kept in a variable declared as long. Negative values are converted large unsigned integers, which fails the range check. Fix by type casting the temperature to u16 when calling regmap_write(). Cc: Iker Perez del Palomar Sustatxa Fixes: e65365fed87f ("hwmon: (lm75) Convert to use regmap") Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin

hwmon: (w83627hf) Use request_muxed_region for Super-IO accesses

2020-01-27T13:50:39+00:00

[ Upstream commit e95fd518d05bfc087da6fcdea4900a57cfb083bd ] Super-IO accesses may fail on a system with no or unmapped LPC bus. Also, other drivers may attempt to access the LPC bus at the same time, resulting in undefined behavior. Use request_muxed_region() to ensure that IO access on the requested address space is supported, and to ensure that access by multiple drivers is synchronized. Fixes: b72656dbc491 ("hwmon: (w83627hf) Stop using globals for I/O port numbers") Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin

hwmon: (pmbus/tps53679) Fix driver info initialization in probe routine

2020-01-27T13:50:24+00:00

[ Upstream commit ff066653aeed8ee2d4dadb1e35774dd91ecbb19f ] Fix tps53679_probe() by using dynamically allocated "pmbus_driver_info" structure instead of static. Usage of static structures causes overwritten of the field "vrm_version", in case the system is equipped with several tps53679 devices with the different "vrm_version". In such case the last probed device overwrites this field for all others. Fixes: 610526527a13 ("hwmon: (pmbus) Add support for Texas Instruments tps53679 device") Signed-off-by: Vadim Pasternak Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin

hwmon: (pmbus/ibm-cffps) Switch LEDs to blocking brightness call

2020-01-23T07:21:39+00:00

commit 9861ff954c7e83e2f738ce16fbe15f8a1e121771 upstream. Since i2c_smbus functions can sleep, the brightness setting function for this driver must be the blocking version to avoid scheduling while atomic. Signed-off-by: Eddie James Link: https://lore.kernel.org/r/20191106200106.29519-2-eajames@linux.ibm.com Fixes: ef9e1cdf419a3 ("hwmon: (pmbus/cffps) Add led class device for power supply fault led") Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman