kernel/linux.git/drivers/hwmon, branch v4.14.263

hwmon: (lm90) Do not report 'busy' status bit as alarm

2021-12-29T11:17:36+00:00

commit cdc5287acad9ede121924a9c9313544b80d15842 upstream. Bit 7 of the status register indicates that the chip is busy doing a conversion. It does not indicate an alarm status. Stop reporting it as alarm status bit. Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman

hwmon: (lm90) Fix usage of CONFIG2 register in detect function

2021-12-29T11:17:34+00:00

[ Upstream commit fce15c45d3fbd9fc1feaaf3210d8e3f8b33dfd3a ] The detect function had a comment "Make compiler happy" when id did not read the second configuration register. As it turns out, the code was checking the contents of this register for manufacturer ID 0xA1 (NXP Semiconductor/Philips), but never actually read the register. So it wasn't surprising that the compiler complained, and it indeed had a point. Fix the code to read the register contents for manufacturer ID 0xa1. At the same time, the code was reading the register for manufacturer ID 0x41 (Analog Devices), but it was not using the results. In effect it was just checking if reading the register returned an error. That doesn't really add much if any value, so stop doing that. Fixes: f90be42fb383 ("hwmon: (lm90) Refactor reading of config2 register") Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin

hwmon: (dell-smm) Fix warning on /proc/i8k creation error

2021-12-22T08:17:58+00:00

commit dbd3e6eaf3d813939b28e8a66e29d81cdc836445 upstream. The removal function is called regardless of whether /proc/i8k was created successfully or not, the later causing a WARN() on module removal. Fix that by only registering the removal function if /proc/i8k was created successfully. Tested on a Inspiron 3505. Fixes: 039ae58503f3 ("hwmon: Allow to compile dell-smm-hwmon driver without /proc/i8k") Signed-off-by: Armin Wolf Acked-by: Pali Rohár Link: https://lore.kernel.org/r/20211112171440.59006-1-W_Armin@gmx.de Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman

hwmon: Fix possible memleak in __hwmon_device_register()

2021-11-26T10:40:30+00:00

[ Upstream commit ada61aa0b1184a8fda1a89a340c7d6cc4e59aee5 ] I got memory leak as follows when doing fault injection test: unreferenced object 0xffff888102740438 (size 8): comm "27", pid 859, jiffies 4295031351 (age 143.992s) hex dump (first 8 bytes): 68 77 6d 6f 6e 30 00 00 hwmon0.. backtrace: [<00000000544b5996>] __kmalloc_track_caller+0x1a6/0x300 [<00000000df0d62b9>] kvasprintf+0xad/0x140 [<00000000d3d2a3da>] kvasprintf_const+0x62/0x190 [<000000005f8f0f29>] kobject_set_name_vargs+0x56/0x140 [<00000000b739e4b9>] dev_set_name+0xb0/0xe0 [<0000000095b69c25>] __hwmon_device_register+0xf19/0x1e50 [hwmon] [<00000000a7e65b52>] hwmon_device_register_with_info+0xcb/0x110 [hwmon] [<000000006f181e86>] devm_hwmon_device_register_with_info+0x85/0x100 [hwmon] [<0000000081bdc567>] tmp421_probe+0x2d2/0x465 [tmp421] [<00000000502cc3f8>] i2c_device_probe+0x4e1/0xbb0 [<00000000f90bda3b>] really_probe+0x285/0xc30 [<000000007eac7b77>] __driver_probe_device+0x35f/0x4f0 [<000000004953d43d>] driver_probe_device+0x4f/0x140 [<000000002ada2d41>] __device_attach_driver+0x24c/0x330 [<00000000b3977977>] bus_for_each_drv+0x15d/0x1e0 [<000000005bf2a8e3>] __device_attach+0x267/0x410 When device_register() returns an error, the name allocated in dev_set_name() will be leaked, the put_device() should be used instead of calling hwmon_dev_release() to give up the device reference, then the name will be freed in kobject_cleanup(). Reported-by: Hulk Robot Fixes: bab2243ce189 ("hwmon: Introduce hwmon_device_register_with_groups") Signed-off-by: Yang Yingliang Link: https://lore.kernel.org/r/20211012112758.2681084-1-yangyingliang@huawei.com Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin

hwmon: (pmbus/lm25066) Add offset coefficients

2021-11-26T10:40:22+00:00

commit ae59dc455a78fb73034dd1fbb337d7e59c27cbd8 upstream. With the exception of the lm5066i, all the devices handled by this driver had been missing their offset ('b') coefficients for direct format readings. Cc: stable@vger.kernel.org Fixes: 58615a94f6a1 ("hwmon: (pmbus/lm25066) Add support for LM25056") Fixes: e53e6497fc9f ("hwmon: (pmbus/lm25066) Refactor device specific coefficients") Signed-off-by: Zev Weiss Link: https://lore.kernel.org/r/20210928092242.30036-2-zev@bewilderbeest.net Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman

hwmon: (tmp421) fix rounding for negative values

2021-10-06T13:05:08+00:00

[ Upstream commit 724e8af85854c4d3401313b6dd7d79cf792d8990 ] Old code produces -24999 for 0b1110011100000000 input in standard format due to always rounding up rather than "away from zero". Use the common macro for division, unify and simplify the conversion code along the way. Fixes: 9410700b881f ("hwmon: Add driver for Texas Instruments TMP421/422/423 sensor chips") Signed-off-by: Paul Fertser Link: https://lore.kernel.org/r/20210924093011.26083-3-fercerpav@gmail.com Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin

hwmon: (max31790) Fix fan speed reporting for fan7..12

2021-07-20T14:17:35+00:00

[ Upstream commit cbbf244f0515af3472084f22b6213121b4a63835 ] Fans 7..12 do not have their own set of configuration registers. So far the code ignored that and read beyond the end of the configuration register range to get the tachometer period. This resulted in more or less random fan speed values for those fans. The datasheet is quite vague when it comes to defining the tachometer period for fans 7..12. Experiments confirm that the period is the same for both fans associated with a given set of configuration registers. Fixes: 54187ff9d766 ("hwmon: (max31790) Convert to use new hwmon registration API") Fixes: 195a4b4298a7 ("hwmon: Driver for Maxim MAX31790") Cc: Jan Kundrát Reviewed-by: Jan Kundrát Cc: Václav Kubernát Reviewed-by: Jan Kundrát Signed-off-by: Guenter Roeck Link: https://lore.kernel.org/r/20210526154022.3223012-2-linux@roeck-us.net Signed-off-by: Sasha Levin

hwmon: (max31722) Remove non-standard ACPI device IDs

2021-07-20T14:17:35+00:00

[ Upstream commit 97387c2f06bcfd79d04a848d35517b32ee6dca7c ] Valid Maxim Integrated ACPI device IDs would start with MXIM, not with MAX1. On top of that, ACPI device IDs reflecting chip names are almost always invalid. Remove the invalid ACPI IDs. Fixes: 04e1e70afec6 ("hwmon: (max31722) Add support for MAX31722/MAX31723 temperature sensors") Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin

hwmon: (scpi-hwmon) shows the negative temperature properly

2021-06-30T12:48:52+00:00

[ Upstream commit 78d13552346289bad4a9bf8eabb5eec5e5a321a5 ] The scpi hwmon shows the sub-zero temperature in an unsigned integer, which would confuse the users when the machine works in low temperature environment. This shows the sub-zero temperature in an signed value and users can get it properly from sensors. Signed-off-by: Riwen Lu Tested-by: Xin Chen Link: https://lore.kernel.org/r/20210604030959.736379-1-luriwen@kylinos.cn Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin

Revert "hwmon: (lm80) fix a missing check of bus read in lm80 probe"

2021-05-26T09:47:00+00:00

commit 99ae3417672a6d4a3bf68d4fc43d7c6ca074d477 upstream. This reverts commit 9aa3aa15f4c2f74f47afd6c5db4b420fadf3f315. Because of recent interactions with developers from @umn.edu, all commits from them have been recently re-reviewed to ensure if they were correct or not. Upon review, it was determined that this commit is not needed at all so just revert it. Also, the call to lm80_init_client() was not properly handled, so if error handling is needed in the lm80_probe() function, then it should be done properly, not half-baked like the commit being reverted here did. Cc: Kangjie Lu Fixes: 9aa3aa15f4c2 ("hwmon: (lm80) fix a missing check of bus read in lm80 probe") Cc: stable Acked-by: Guenter Roeck Link: https://lore.kernel.org/r/20210503115736.2104747-5-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman