kernel/linux.git/drivers/hwmon/tmp108.c, branch v7.2-rc2

Replace by more specific (c files)

2026-07-03T05:38:17+00:00

Replace the #include of by the more specific where applicable. For most cases the include can be dropped completely, only a few drivers need one or two headers added. Acked-by: Danilo Krummrich Acked-by: Takashi Sakamoto Acked-by: Bjorn Helgaas Link: https://patch.msgid.link/1a3f2007c5c5dcf555c09a4035ce3ae8ef1b6c49.1782808461.git.u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König (The Capable Hub)

hwmon: Use named initializers for arrays of i2c_device_data

2026-06-09T15:22:59+00:00

While being less compact, using named initializers allows to more easily see which members of the structs are assigned which value without having to lookup the declaration of the struct. And it's also more robust against changes to the struct definition. The mentioned robustness is relevant for a planned change to struct i2c_device_id that replaces .driver_data by an anonymous union. While touching all these arrays, unify indention and usage of commas. This patch doesn't modify the compiled arrays, only their representation in source form benefits. The former was confirmed with x86 and arm64 builds. Signed-off-by: Uwe Kleine-König (The Capable Hub) Link: https://lore.kernel.org/r/65b77bcd452752c36d866069cc5790b26d2bf8dc.1778688803.git.u.kleine-koenig@baylibre.com Signed-off-by: Guenter Roeck

hwmon: (tmp108) Add support for P3T1035 and P3T2030

2026-01-31T15:38:33+00:00

Add support for the P3T1035 & P3T2030 temperature sensor. While mostly compatible with the TMP108, P3T1035 uses an 8-bit configuration register instead of the 16-bit layout used by TMP108. Updated driver to handle this difference during configuration read/write. Signed-off-by: Mayank Mahajan Link: https://lore.kernel.org/r/20260119040459.2898998-2-mayankmahajan.x@nxp.com [groeck: Reordered include files to retain alphabetic order] Signed-off-by: Guenter Roeck

hwmon: (tmp108) Drop mutex.h include

2025-10-15T18:02:43+00:00

The driver does not perform any locking, so including mutex.h is not necessary. Drop it. Signed-off-by: Guenter Roeck

hwmon: (tmp108) Drop of_match_ptr() protection

2024-12-14T16:00:44+00:00

Limiting the scope of devicetree support to CONFIG_OF prevents use of this driver with ACPI via PRP0001. Drop the dependency. While at it, - Switch of.h for mod_devicetable.h include given the use of struct of_device_id which is defined in that header - Add I2C device ID for p3t1085 - Drop the unnecessary include of hwmon-sysfs.h. Cc: Frank Li Signed-off-by: Guenter Roeck Link: https://lore.kernel.org/r/20241204141754.4051186-1-linux@roeck-us.net Reviewed-by: Frank Li Signed-off-by: Guenter Roeck

hwmon: (tmp108) Add basic regulator support

2024-12-14T16:00:44+00:00

TMP108/P3T1085 are powered by the V+/VCC regulator, add support for it. Signed-off-by: Stanislav Jakubek Signed-off-by: Guenter Roeck

hwmon: (tmp108) Do not fail in I3C probe when I3C regmap is a module

2024-11-23T17:49:02+00:00

I3C device probe fails when CONFIG_REGMAP_I3C=m: p3t1085_i3c 0-23615290090: error -ENODEV: Failed to register i3c regmap Fix this by using the IS_ENABLED(CONFIG_REGMAP_I3C) macro in the code. Fixes: c40655e33106 ("hwmon: (tmp108) Add support for I3C device") Signed-off-by: Jarkko Nikula Message-ID: <20241121121819.393104-1-jarkko.nikula@linux.intel.com> [groeck: Remove #ifdef entirely; it is not needed due to dead code elimination] Signed-off-by: Guenter Roeck

hwmon: (tmp108) Add support for I3C device

2024-11-12T21:54:55+00:00

Add support for I3C device in the tmp108 driver to handle the P3T1085 sensor. Register the I3C device driver to enable I3C functionality for the sensor. Signed-off-by: Frank Li Message-ID: <20241112-p3t1085-v4-2-a1334314b1e6@nxp.com> Signed-off-by: Guenter Roeck

hwmon: (tmp108) Add helper function tmp108_common_probe() to prepare I3C support

2024-11-12T21:54:55+00:00

Add help function tmp108_common_probe() to pave road to support i3c for P3T1085(NXP) chip. Use dev_err_probe() to simplify the code. Signed-off-by: Frank Li Message-ID: <20241112-p3t1085-v4-1-a1334314b1e6@nxp.com> Signed-off-by: Guenter Roeck

hwmon: (tmp108) Add NXP p3t1085 support

2024-11-12T21:54:55+00:00

Add compatible string 'nxp,p3t1085' since p3t1085's register layout is the same as tmp108. The p3t1085 supports I3C interface. Update document tmp108.rst and Kconfig's help context. Signed-off-by: Frank Li Message-ID: <20241111-p3t1085-v3-2-bff511550aad@nxp.com> Signed-off-by: Guenter Roeck