kernel/linux.git/drivers/hwmon/Makefile, branch v4.11.5

hwmon: new driver for ST stts751 thermal sensor

2017-02-03T13:32:59+00:00

This patch adds a HWMON driver for ST Microelectronics STTS751 temperature sensors. Thanks-to: LABBE Corentin [for suggestions] Thanks-to: Guenter Roeck [for suggestion and discussions] Signed-off-by: Andrea Merello Cc: LABBE Corentin Signed-off-by: Guenter Roeck

hwmon: Add Texas Instruments TMP108 temperature sensor driver.

2016-12-10T05:54:25+00:00

Add support for the TI TMP108 temperature sensor with some device configuration parameters. Signed-off-by: John Muir [groeck: Initialize of_match_table] Signed-off-by: Guenter Roeck

hwmon: Add tc654 driver

2016-12-02T21:28:05+00:00

Add support for the tc654 and tc655 fan controllers from Microchip. http://ww1.microchip.com/downloads/en/DeviceDoc/20001734C.pdf Signed-off-by: Chris Packham Acked-by: Rob Herring [groeck: Fixed continuation line alignments] Signed-off-by: Guenter Roeck

hwmon: Add xgene hwmon driver

2016-09-09T04:34:16+00:00

This patch adds hardware temperature and power reading support for APM X-Gene SoC using the mailbox communication interface. Signed-off-by: Hoan Tran Reviewed-by: Guenter Roeck Signed-off-by: Guenter Roeck

hwmon: Add driver for FTS BMC chip "Teutates"

2016-07-20T13:29:54+00:00

This driver implements hardware monitoring and watchdog support for the FTS BMC Chip "Teutates". Signed-off-by: Thilo Cestonaro [groeck: Updated subject and description; fixed dependencies] Signed-off-by: Guenter Roeck

hwmon: Add support for INA3221 Triple Current/Voltage Monitors

2016-06-28T01:58:03+00:00

Add support for the the INA3221 26v capable, Triple channel, Bi-Directional, Zero-Drift, Low-/High-Side, Current/Voltage Monitor with I2C interface. Signed-off-by: Andrew F. Davis Signed-off-by: Guenter Roeck

hwmon: add support for Sensirion SHT3x sensors

2016-06-28T01:58:03+00:00

This driver implements support for the Sensirion SHT3x-DIS chip, a humidity and temperature sensor. Temperature is measured in degrees celsius, relative humidity is expressed as a percentage. In the sysfs interface, all values are scaled by 1000, i.e. the value for 31.5 degrees celsius is 31500. Signed-off-by: Pascal Sachs [groeck: Fixed 'Variable length array is used' gcc warning] Signed-off-by: Guenter Roeck

hwmon: (max31722) Add support for MAX31722/MAX31723 temperature sensors

2016-04-19T13:32:34+00:00

Add basic support for the Maxim Integrated MAX31722/MAX31723 SPI temperature sensors / thermostats. Includes: - ACPI support; - raw temperature readings; - power management Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX31722-MAX31723.pdf Signed-off-by: Tiberiu Breana Signed-off-by: Guenter Roeck

hwmon: Create an NSA320 hardware monitoring driver

2016-03-09T02:40:49+00:00

Create a driver to support the hardware monitoring chip present in the Zyxel NSA320 and some of the other Zyxel NAS devices. The driver reads fan speed and temperature from a suitably pre-programmed MCU on the device. Signed-off-by: Adam Baker [groeck: Dropped .owner field initialization] Signed-off-by: Guenter Roeck

hwmon: Add LTC2990 sensor driver

2016-03-05T14:25:34+00:00

This adds support for the Linear Technology LTC2990 I2C System Monitor. The LTC2990 supports a combination of voltage, current and temperature monitoring. This driver currently only supports reading two currents by measuring two differential voltages across series resistors, in addition to the Vcc supply voltage and internal temperature. This is sufficient to support the Topic Miami SOM which uses this chip to monitor the currents flowing into the FPGA and the CPU parts. Signed-off-by: Mike Looijmans Signed-off-by: Guenter Roeck