kernel/linux.git/drivers/hwmon/Kconfig, branch linux-4.7.y

hwmon: (it87) Add support for IT8628E

2016-04-19T13:32:38+00:00

IT8628E is functionally identical to IT8620E. Tested-by: Martin Blumenstingl Signed-off-by: Guenter Roeck

hwmon: (fam15h_power) Add CPU_SUP_AMD as the dependence

2016-04-19T13:32:34+00:00

This patch adds CONFIG_CPU_SUP_AMD as the dependence of fam15h_power driver. Because the following patch will use the interface from x86/kernel/cpu/amd.c. Otherwise, the below error might be encountered: All errors (new ones prefixed by >>): drivers/built-in.o: In function `fam15h_power_probe': >> fam15h_power.c:(.text+0x26e3a3): undefined reference to >> `amd_get_cores_per_cu' fam15h_power.c:(.text+0x26e41e): undefined reference to `amd_get_cores_per_cu' Reported-by: build test robot Acked-by: Borislav Petkov Signed-off-by: Huang Rui Signed-off-by: Guenter Roeck

hwmon: (max31722) Add support for MAX31722/MAX31723 temperature sensors

2016-04-19T13:32:34+00:00

Add basic support for the Maxim Integrated MAX31722/MAX31723 SPI temperature sensors / thermostats. Includes: - ACPI support; - raw temperature readings; - power management Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX31722-MAX31723.pdf Signed-off-by: Tiberiu Breana Signed-off-by: Guenter Roeck

hwmon: Create an NSA320 hardware monitoring driver

2016-03-09T02:40:49+00:00

Create a driver to support the hardware monitoring chip present in the Zyxel NSA320 and some of the other Zyxel NAS devices. The driver reads fan speed and temperature from a suitably pre-programmed MCU on the device. Signed-off-by: Adam Baker [groeck: Dropped .owner field initialization] Signed-off-by: Guenter Roeck

hwmon: (ntc_thermistor) Add support for ncpXXxh103

2016-03-05T14:25:34+00:00

This patch adds support for the Murata NCP15XH103 thermistor series. Signed-off-by: Joseph McNally Signed-off-by: Guenter Roeck

hwmon: Add LTC2990 sensor driver

2016-03-05T14:25:34+00:00

This adds support for the Linear Technology LTC2990 I2C System Monitor. The LTC2990 supports a combination of voltage, current and temperature monitoring. This driver currently only supports reading two currents by measuring two differential voltages across series resistors, in addition to the Vcc supply voltage and internal temperature. This is sufficient to support the Topic Miami SOM which uses this chip to monitor the currents flowing into the FPGA and the CPU parts. Signed-off-by: Mike Looijmans Signed-off-by: Guenter Roeck

hwmon: (htu21) Remove driver

2015-12-18T16:20:59+00:00

HTU21 is now supported by IIO, and can be instantiated as hwmon driver using the iio-hwmon bridge. An explicit hwmon driver is no longer needed. Cc: William Markezana Cc: Ludovic Tancerel Cc: Jonathan Cameron Reviewed-by: Jean Delvare Signed-off-by: Guenter Roeck

hwmon: (sht15) Select CONFIG_BITREVERSE

2015-12-18T16:19:52+00:00

If CONFIG_BITREVERSE is not built-in, the sht15 driver fails to link: drivers/built-in.o: In function `sht15_crc8': drivers/hwmon/sht15.c:195: undefined reference to `byte_rev_table' This adds a Kconfig 'select' statement, like all other users of bitrev.h have it. Signed-off-by: Arnd Bergmann Fixes: 33836ee98533 ("hwmon:change sht15_reverse()") Signed-off-by: Guenter Roeck

hwmon: (scpi) add thermal-of dependency

2015-11-16T17:54:45+00:00

The newly added scpi thermal support is broken when the scpi driver is built-in but the thermal driver is a loadable module: drivers/built-in.o: In function `scpi_hwmon_probe': (.text+0x444d70): undefined reference to `thermal_zone_of_sensor_unregister' (.text+0x444d94): undefined reference to `thermal_zone_of_sensor_register' drivers/built-in.o: In function `scpi_hwmon_remove': (text+0x444e6c): undefined reference to `thermal_zone_of_sensor_unregister' This uses the same Kconfig trick that we have in a couple of other drivers already to ensure we can only select the driver in valid configurations when either THERMAL_OF is disabled, or when with a dependency on CONFIG_THERMAL that can force SCPI to be a loadable module in the case I was hitting. Signed-off-by: Arnd Bergmann Fixes: 68acc77a2d51 ("hwmon: Support thermal zones registration for SCP temperature sensors") Signed-off-by: Guenter Roeck

hwmon: (ina2xx) Fix build issue by selecting REGMAP_I2C

2015-11-16T05:52:39+00:00

Since a0de56c81fcf ("hwmon: (ina2xx) convert driver to using regmap") the driver requires REGMAP_I2C to build. Select it by default in Kconfig. Reported-by: Guo Chunrong Cc: Marc Titinger Signed-off-by: Li Yang Fixes: a0de56c81fcf ("hwmon: (ina2xx) convert driver to using regmap") Signed-off-by: Guenter Roeck