kernel/linux.git/drivers/hid, branch v7.0.12

HID: wacom: Fix OOB write in wacom_hid_set_device_mode()

2026-06-09T10:32:39+00:00

commit c0a8899e02ddebd51e2589835182c239c2e224ae upstream. wacom_hid_set_device_mode() currently assumes that the HID_DG_INPUTMODE usage is always located in the first field (field[0]) of the feature report. However, a device can specify HID_DG_INPUTMODE in a different field. If HID_DG_INPUTMODE is in a field other than the first one and the first field has a report_count smaller than the usage_index of HID_DG_INPUTMODE, this leads to an out-of-bounds write to r->field[0]->value. Fix this by storing the field index of HID_DG_INPUTMODE in 'struct hid_data' during feature mapping. In wacom_hid_set_device_mode(), use this stored field index to access the correct field and add bounds checks to ensure both the field index and the value index are within valid ranges before writing. Cc: stable@vger.kernel.org Fixes: 5ae6e89f7409 ("HID: wacom: implement the finger part of the HID generic handling") Tested-by: Ping Cheng Reviewed-by: Ping Cheng Signed-off-by: Lee Jones Signed-off-by: Benjamin Tissoires Signed-off-by: Greg Kroah-Hartman

HID: quirks: Add ALWAYS_POLL quirk for SIGMACHIP USB mouse

2026-06-09T10:32:31+00:00

commit 07466fc91c55532edcfb5c6a7ccd2ea52728d6bd upstream. The SIGMACHIP USB mouse with VID/PID 1c4f:0034 can disconnect and re-enumerate repeatedly after it has been enumerated if its interrupt endpoint is not continuously polled. This was observed with the device reporting itself as "SIGMACHIP Usb Mouse". Keeping the input event device open avoids the disconnects. Add HID_QUIRK_ALWAYS_POLL for this device so the HID core keeps polling it even when there is no userspace input consumer. Cc: stable@vger.kernel.org Signed-off-by: hlleng Signed-off-by: Benjamin Tissoires Signed-off-by: Greg Kroah-Hartman

HID: quirks: really enable the intended work around for appledisplay

2026-06-01T15:54:41+00:00

[ Upstream commit 5f90dcfa8dc32a488581b78e575cdd7808ba5c78 ] Commit c7fabe4ad921 ("HID: quirks: work around VID/PID conflict for appledisplay") intends to add a quirk for kernels built with Apple Cinema Display support, but it refers to the non-existing config option CONFIG_APPLEDISPLAY, whereas the config option for Apple Cinema Display support is named CONFIG_USB_APPLEDISPLAY. Refer to the intended config option CONFIG_USB_APPLEDISPLAY in the ifdef directive. Fixes: c7fabe4ad921 ("HID: quirks: work around VID/PID conflict for appledisplay") Signed-off-by: Lukas Bulwahn Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin

HID: uclogic: Fix regression of input name assignment

2026-06-01T15:54:33+00:00

[ Upstream commit 487359284509a6745e14b8c0518768bc277809b0 ] The previous fix for adding the devm_kasprintf() return check in the commit bd07f751208b ("HID: uclogic: Add NULL check in uclogic_input_configured()") changed the condition of hi->input->name assignment, and it resulted in missing the proper input device name when no custom suffix is defined. Restore the conditional to the original content to address the regression. Fixes: bd07f751208b ("HID: uclogic: Add NULL check in uclogic_input_configured()") Signed-off-by: Takashi Iwai Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin

HID: intel-thc-hid: Intel-quickspi: Fix some error codes

2026-06-01T15:54:33+00:00

[ Upstream commit ae4ac077332ea3341a0f4c0973556c6b7ac5b7a1 ] If we have a partial read that is supposed to be treated as failure but in this code we forgot to set the error code. Return -EINVAL. Fixes: 9d8d51735a3a ("HID: intel-thc-hid: intel-quickspi: Add HIDSPI protocol implementation") Signed-off-by: Dan Carpenter Reviewed-by: Even Xu Reviewed-by: Mark Pearson Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin

HID: core: Fix size_t specifier in hid_report_raw_event()

2026-05-23T11:09:38+00:00

[ Upstream commit 4d3a2a466b8d68d852a1f3bbf11204b718428dc4 ] When building for 32-bit platforms, for which 'size_t' is 'unsigned int', there are warnings around using the incorrect format specifier to print bsize in hid_report_raw_event(): drivers/hid/hid-core.c:2054:29: error: format specifies type 'long' but the argument has type 'size_t' (aka 'unsigned int') [-Werror,-Wformat] 2053 | hid_warn_ratelimited(hid, "Event data for report %d is incorrect (%d vs %ld)\n", | ~~~ | %zu 2054 | report->id, csize, bsize); | ^~~~~ drivers/hid/hid-core.c:2076:29: error: format specifies type 'long' but the argument has type 'size_t' (aka 'unsigned int') [-Werror,-Wformat] 2075 | hid_warn_ratelimited(hid, "Event data for report %d was too short (%d vs %ld)\n", | ~~~ | %zu 2076 | report->id, rsize, bsize); | ^~~~~ Use the proper 'size_t' format specifier, '%zu', to clear up the warnings. Cc: stable@vger.kernel.org Fixes: 2c85c61d1332 ("HID: pass the buffer size to hid_report_raw_event") Reported-by: Miguel Ojeda Closes: https://lore.kernel.org/20260516020430.110135-1-ojeda@kernel.org/ Signed-off-by: Nathan Chancellor Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin

HID: core: introduce hid_safe_input_report()

2026-05-23T11:09:38+00:00

[ Upstream commit 206342541fc887ae919774a43942dc883161fece ] hid_input_report() is used in too many places to have a commit that doesn't cross subsystem borders. Instead of changing the API, introduce a new one when things matters in the transport layers: - usbhid - i2chid This effectively revert to the old behavior for those two transport layers. Fixes: 0a3fe972a7cb ("HID: core: Mitigate potential OOB by removing bogus memset()") Cc: stable@vger.kernel.org Signed-off-by: Benjamin Tissoires Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin

HID: pass the buffer size to hid_report_raw_event

2026-05-23T11:09:37+00:00

[ Upstream commit 2c85c61d1332e1e16f020d76951baf167dcb6f7a ] commit 0a3fe972a7cb ("HID: core: Mitigate potential OOB by removing bogus memset()") enforced the provided data to be at least the size of the declared buffer in the report descriptor to prevent a buffer overflow. However, we can try to be smarter by providing both the buffer size and the data size, meaning that hid_report_raw_event() can make better decision whether we should plaining reject the buffer (buffer overflow attempt) or if we can safely memset it to 0 and pass it to the rest of the stack. Fixes: 0a3fe972a7cb ("HID: core: Mitigate potential OOB by removing bogus memset()") Cc: stable@vger.kernel.org Signed-off-by: Benjamin Tissoires Acked-by: Johan Hovold Reviewed-by: Greg Kroah-Hartman Signed-off-by: Jiri Kosina Stable-dep-of: 206342541fc8 ("HID: core: introduce hid_safe_input_report()") Signed-off-by: Sasha Levin

HID: usbhid: fix deadlock in hid_post_reset()

2026-05-23T11:09:06+00:00

[ Upstream commit 8df2c1b47ee3cd50fd454f75c7a7e2ae8a6adf72 ] You can build a USB device that includes a HID component and a storage or UAS component. The components can be reset only together. That means that hid_pre_reset() and hid_post_reset() are in the block IO error handling. Hence no memory allocation used in them may do block IO because the IO can deadlock on the mutex held while resetting a device and calling the interface drivers. Use GFP_NOIO for all allocations in them. Fixes: dc3c78e434690 ("HID: usbhid: Check HID report descriptor contents after device reset") Signed-off-by: Oliver Neukum Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin

HID: asus: do not abort probe when not necessary

2026-05-23T11:09:05+00:00

[ Upstream commit 7253091766ded0fd81fe8d8be9b8b835495b06e8 ] In order to avoid dereferencing a NULL pointer asus_probe is aborted early and control of some asus devices is transferred over hid-generic after erroring out even when such NULL dereference cannot happen: only early abort when the NULL dereference can happen. Also make the code shorter and more adherent to coding standards removing square brackets enclosing single-line if-else statements. Fixes: d3af6ca9a8c3 ("HID: asus: fix UAF via HID_CLAIMED_INPUT validation") Signed-off-by: Denis Benato Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin