kernel/linux.git/drivers/hid/i2c-hid, branch master

Merge tag 'v7.0-rc3' into next

2026-03-12T17:44:42+00:00

Sync up with the mainline to brig up the latest changes, specifically changes to ALPS driver.

HID: i2c-hid: elan: Add parade-tc3408 timing

2026-02-26T16:04:55+00:00

Parade-tc3408 requires reset to pull down time greater than 10ms, so the configuration post_power_delay_ms is 10, and the chipset initial time is required to be greater than 300ms, so the post_gpio_reset_on_delay_ms is set to 300. Signed-off-by: Langyan Ye Reviewed-by: Douglas Anderson Acked-by: Jiri Kosina Link: https://patch.msgid.link/20260108063524.742464-3-yelangyan@huaqin.corp-partner.google.com Signed-off-by: Dmitry Torokhov

Merge tag 'input-for-v7.0-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2026-02-15T16:24:19+00:00

Pull input updates from Dmitry Torokhov: - support for FocalTech FT8112 added to i2c-hid driver - support for FocalTech FT3518 added to edt-ft5x06 driver - support for power buttons in TWL603x chips added to twl4030-pwrbutton driver - an update to gpio-decoder driver to make it usable on non-OF platforms and to clean up the code - an update to synaptics_i2c driver switching it to use managed resources and a fix to restarting polling after resume - an update to gpio-keys driver to fall back to getting IRQ from resources if not specified using other means - an update to ili210x driver to support polling mode - a number of input drivers switched to scnprintf() to suppress truncation warnings - a number of updates and conversions of device tree bindings to yaml format - fixes to spelling in comments and messages in several drivers - other assorted fixups * tag 'input-for-v7.0-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (57 commits) dt-bindings: input: qcom,pm8941-pwrkey: Document PMM8654AU dt-bindings: input: touchscreen: imagis: allow linux,keycodes for ist3038 Input: apbps2 - fix comment style and typos Input: gpio_keys - fall back to platform_get_irq() for interrupt-only keys Input: novatek-nvt-ts - drop wake_type check dt-bindings: input: touchscreen: tsc2007: document '#io-channel-cells' Input: ili210x - add support for polling mode dt-bindings: touchscreen: trivial-touch: Drop 'interrupts' requirement for old Ilitek Input: appletouch - fix potential race between resume and open HID: i2c-hid: Add FocalTech FT8112 dt-bindings: input: i2c-hid: Introduce FocalTech FT8112 Input: synaptics_i2c - switch to using managed resources Input: synaptics_i2c - guard polling restart in resume Input: gpio_decoder - don't use "proxy" headers Input: gpio_decoder - make use of the macros from bits.h Input: gpio_decoder - replace custom loop by gpiod_get_array_value_cansleep() Input: gpio_decoder - unify messages with help of dev_err_probe() Input: gpio_decoder - make use of device properties Input: serio - complete sizeof(*pointer) conversions Input: wdt87xx_i2c - switch to use dev_err_probe() ...

HID: i2c-hid: Add FocalTech FT8112

2026-01-21T22:23:12+00:00

Information for touchscreen model HKO/RB116AS01-2 as below: - HID :FTSC1000 - slave address:0X38 - Interface:HID over I2C - Touch control lC:FT8112 - I2C ID: PNP0C50 Signed-off-by: Daniel Peng Acked-by: Jiri Kosina Reviewed-by: Douglas Anderson Link: https://patch.msgid.link/20251117094041.300083-2-Daniel_Peng@pegatron.corp-partner.google.com Signed-off-by: Dmitry Torokhov

HID: i2c-hid: fix potential buffer overflow in i2c_hid_get_report()

2026-01-07T17:35:58+00:00

`i2c_hid_xfer` is used to read `recv_len + sizeof(__le16)` bytes of data into `ihid->rawbuf`. The former can come from the userspace in the hidraw driver and is only bounded by HID_MAX_BUFFER_SIZE(16384) by default (unless we also set `max_buffer_size` field of `struct hid_ll_driver` which we do not). The latter has size determined at runtime by the maximum size of different report types you could receive on any particular device and can be a much smaller value. Fix this by truncating `recv_len` to `ihid->bufsize - sizeof(__le16)`. The impact is low since access to hidraw devices requires root. Signed-off-by: Kwok Kin Ming Signed-off-by: Benjamin Tissoires

Merge tag 'hid-for-linus-2025093001' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid

2025-10-04T22:38:04+00:00

Pull HID updates from Benjamin Tissoires: - haptic touchpad support (Angela Czubak and Jonathan Denose) - support for audio jack handling on DualSense Playstation controllers (Cristian Ciocaltea) - allow HID-BPF to rebind a driver to hid-multitouch (Benjamin Tissoires) - rework hidraw ioctls to make them safer (and tested) (Benjamin Tissoires) - various PIDFF and universal-PIDFF fixes/improvements (Tomasz Pakuła) - better configuration of Intel QuickI2C through ACPI (Xinpeng Sun) - other assorted cleanups and fixes * tag 'hid-for-linus-2025093001' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (58 commits) HID: playstation: Switch to scoped_guard() in {dualsense|dualshock4}_output_worker() HID: playstation: Silence sparse warnings for locking context imbalances HID: playstation: Update SP preamp gain comment line HID: intel-thc-hid: intel-quicki2c: support ACPI config for advanced features HID: core: Change hid_driver to use a const char* for name HID: hidraw: tighten ioctl command parsing selftests/hid: hidraw: forge wrong ioctls and tests them selftests/hid: hidraw: add more coverage for hidraw ioctls selftests/hid: update vmtest.sh for virtme-ng HID: playstation: Support DualSense audio jack event reporting HID: playstation: Support DualSense audio jack hotplug detection HID: playstation: Redefine DualSense input report status field HID: playstation: Prefer kzalloc(sizeof(*buf)...) HID: playstation: Document spinlock_t usage HID: playstation: Fix all alignment and line length issues HID: playstation: Correct spelling in comment sections HID: playstation: Replace uint{32,16,8}_t with u{32,16,8} HID: playstation: Simplify locking with guard() and scoped_guard() HID: playstation: Add spaces around arithmetic operators HID: playstation: Make use of bitfield macros ...

HID: i2c-hid: Resolve touchpad issues on Dell systems during S4

2025-09-16T08:24:46+00:00

Dell systems utilize an EC-based touchpad emulation when the ACPI touchpad _DSM is not invoked. This emulation acts as a secondary master on the I2C bus, designed for scenarios where the I2C touchpad driver is absent, such as in BIOS menus. Typically, loading the i2c-hid module triggers the _DSM at initialization, disabling the EC-based emulation. However, if the i2c-hid module is missing from the boot kernel used for hibernation snapshot restoration, the _DSM remains uncalled, resulting in dual masters on the I2C bus and subsequent arbitration errors. This issue arises when i2c-hid resides in the rootfs instead of the kernel or initramfs. To address this, switch from using the SYSTEM_SLEEP_PM_OPS() macro to dedicated callbacks, introducing a specific callback for restoring the S4 image. This callback ensures the _DSM is invoked. Signed-off-by: Mario Limonciello (AMD) Signed-off-by: Benjamin Tissoires

HID: i2c-hid: Fix test in i2c_hid_core_register_panel_follower()

2025-08-27T23:35:20+00:00

Bitwise AND was intended instead of OR. With the current code the condition is always true. Fixes: cbdd16b818ee ("HID: i2c-hid: Make elan touch controllers power on after panel is enabled") Signed-off-by: Dan Carpenter Reviewed-by: Douglas Anderson Reviewed-by: Pin-yen Lin Acked-by: Jiri Kosina Signed-off-by: Douglas Anderson Link: https://lore.kernel.org/r/aK8Au3CgZSTvfEJ6@stanley.mountain

HID: i2c-hid: Make elan touch controllers power on after panel is enabled

2025-08-25T16:18:39+00:00

Introduce a new HID quirk to indicate that this device has to be enabled after the panel's backlight is enabled, and update the driver data for the elan devices to enable this quirk. This cannot be a I2C HID quirk because the kernel needs to acknowledge this before powering up the device and read the VID/PID. When this quirk is enabled, register .panel_enabled()/.panel_disabling() instead for the panel follower. Also rename the *panel_prepare* functions into *panel_follower* because they could be called in other situations now. Fixes: bd3cba00dcc63 ("HID: i2c-hid: elan: Add support for Elan eKTH6915 i2c-hid touchscreens") Fixes: d06651bebf99e ("HID: i2c-hid: elan: Add elan-ekth6a12nay timing") Reviewed-by: Douglas Anderson Signed-off-by: Pin-yen Lin Acked-by: Jiri Kosina Signed-off-by: Douglas Anderson Link: https://lore.kernel.org/r/20250818115015.2909525-2-treapking@chromium.org

HID: i2c-hid: improve i2c_hid_get_report error message

2025-03-04T20:26:29+00:00

We have two places to print "failed to set a report to ...", use "get a report from" instead of "set a report to", it makes people who knows less about the module to know where the error happened. Before: i2c_hid_acpi i2c-FTSC1000:00: failed to set a report to device: -11 After: i2c_hid_acpi i2c-FTSC1000:00: failed to get a report from device: -11 Signed-off-by: Wentao Guan Signed-off-by: Jiri Kosina