kernel/linux.git/drivers/hid/hid-ids.h, branch v6.18.42

HID: quirks: Add ALWAYS_POLL quirk for SIGMACHIP USB mouse

2026-06-09T10:28:34+00:00

commit 07466fc91c55532edcfb5c6a7ccd2ea52728d6bd upstream. The SIGMACHIP USB mouse with VID/PID 1c4f:0034 can disconnect and re-enumerate repeatedly after it has been enumerated if its interrupt endpoint is not continuously polled. This was observed with the device reporting itself as "SIGMACHIP Usb Mouse". Keeping the input event device open avoids the disconnects. Add HID_QUIRK_ALWAYS_POLL for this device so the HID core keeps polling it even when there is no userspace input consumer. Cc: stable@vger.kernel.org Signed-off-by: hlleng Signed-off-by: Benjamin Tissoires Signed-off-by: Greg Kroah-Hartman

HID: quirks: add HID_QUIRK_ALWAYS_POLL for 8BitDo Pro 3

2026-04-22T11:22:15+00:00

[ Upstream commit 532743944324a873bbaf8620fcabcd0e69e30c36 ] According to a mailing list report [1], this controller's predecessor has the same issue. However, it uses the xpad driver instead of HID, so this quirk wouldn't apply. [1]: https://lore.kernel.org/linux-input/unufo3$det$1@ciao.gmane.io/ Signed-off-by: leo vriska Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin

HID: asus: add xg mobile 2023 external hardware support

2026-04-02T11:22:58+00:00

[ Upstream commit 377f8e788945d45b012ed9cfc35ca56c02e86cd8 ] XG mobile stations have the 0x5a endpoint and has to be initialized: add them to hid-asus. Signed-off-by: Denis Benato Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin

HID: elecom: Add support for ELECOM HUGE Plus M-HT1MRBK

2026-03-04T12:20:03+00:00

[ Upstream commit b8e5fdf0bd022cd5493a5987ef66f5a24f8352d8 ] New model in the ELECOM HUGE trackball line that has 8 buttons but the report descriptor specifies only 5. The HUGE Plus supports connecting via Bluetooth, 2.4GHz wireless USB dongle, and directly via a USB-C cable. Each connection type reports a different device id, 01AA for cable, 01AB for USB dongle, and 01AC for Bluetooth. This patch adds these device IDs and applies the fixups similar to the other ELECOM devices to get all 8 buttons working for all 3 connection types. For reference, the usbhid-dump output: 001:013:001:DESCRIPTOR 1769085639.598405 05 01 09 02 A1 01 85 01 09 01 A1 00 05 09 19 01 29 05 15 00 25 01 75 01 95 05 81 02 75 03 95 01 81 01 05 01 09 30 09 31 16 01 80 26 FF 7F 75 10 95 02 81 06 09 38 15 81 25 7F 75 08 95 01 81 06 05 0C 0A 38 02 15 81 25 7F 75 08 95 01 81 06 C0 C0 05 0C 09 01 A1 01 85 02 15 01 26 8C 02 19 01 2A 8C 02 75 10 95 01 81 00 C0 05 01 09 80 A1 01 85 03 09 82 09 81 09 83 15 00 25 01 19 01 29 03 75 01 95 03 81 02 95 05 81 01 C0 06 01 FF 09 00 A1 01 85 08 09 00 15 00 26 FF 00 75 08 95 07 81 02 C0 06 02 FF 09 02 A1 01 85 06 09 02 15 00 26 FF 00 75 08 95 07 B1 02 C0 Signed-off-by: David Phillips Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin

HID: multitouch: add eGalaxTouch EXC3188 support

2026-03-04T12:20:02+00:00

[ Upstream commit 8e4ac86b2ddd36fe501e20ecfcc080e536df1f48 ] Add support for the for the EXC3188 touchscreen from eGalaxy. Signed-off-by: Thorsten Schmelzer Signed-off-by: Michael Tretter Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin

HID: multitouch: add quirks for Lenovo Yoga Book 9i

2026-03-04T12:19:54+00:00

[ Upstream commit 822bc5b3744b0b2c2c9678aa1d80b2cf04fdfabf ] The Lenovo Yoga Book 9i is a dual-screen laptop, with a single composite USB device providing both touch and tablet interfaces for both screens. All inputs report through a single device, differentiated solely by report numbers. As there is no way for udev to differentiate the inputs based on USB vendor/product ID or interface numbers, custom naming is required to match against for downstream configuration. A firmware bug also results in an erroneous InRange message report being received after the stylus leaves proximity, blocking later touch events. Add required quirks for Gen 8 to Gen 10 models, including a new quirk providing for custom input device naming and dropping erroneous InRange reports. Signed-off-by: Brian Howard Tested-by: Brian Howard Tested-by: Kris Fredrick Reported-by: Andrei Shumailov Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220386 Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin

HID: Elecom: Add support for ELECOM M-XT3DRBK (018C)

2026-02-11T12:41:50+00:00

[ Upstream commit 12adb969658ec39265eb8c7ea9e1856867fb9ceb ] Wireless/new version of the Elecom trackball mouse M-XT3DRBK has a product id that differs from the existing M-XT3DRBK. The report descriptor format also seems to have changed and matches other (newer?) models instead (except for six buttons instead of eight). This patch follows the same format as the patch for the M-XT3URBK (018F) by Naoki Ueki (Nov 3rd 2025) to enable the sixth mouse button. dmesg output: [ 292.074664] usb 1-2: new full-speed USB device number 7 using xhci_hcd [ 292.218667] usb 1-2: New USB device found, idVendor=056e, idProduct=018c, bcdDevice= 1.00 [ 292.218676] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 292.218679] usb 1-2: Product: ELECOM TrackBall Mouse [ 292.218681] usb 1-2: Manufacturer: ELECOM usbhid-dump output: 001:006:000:DESCRIPTOR 1765072638.050578 05 01 09 02 A1 01 09 01 A1 00 85 01 05 09 19 01 29 05 15 00 25 01 95 08 75 01 81 02 95 01 75 00 81 01 05 01 09 30 09 31 16 00 80 26 FF 7F 75 10 95 02 81 06 C0 A1 00 05 01 09 38 15 81 25 7F 75 08 95 01 81 06 C0 A1 00 05 0C 0A 38 02 95 01 75 08 15 81 25 7F 81 06 C0 C0 06 01 FF 09 00 A1 01 85 02 09 00 15 00 26 FF 00 75 08 95 07 81 02 C0 05 0C 09 01 A1 01 85 05 15 00 26 3C 02 19 00 2A 3C 02 75 10 95 01 81 00 C0 05 01 09 80 A1 01 85 03 19 81 29 83 15 00 25 01 95 03 75 01 81 02 95 01 75 05 81 01 C0 06 BC FF 09 88 A1 01 85 04 95 01 75 08 15 00 26 FF 00 19 00 2A FF 00 81 00 C0 06 02 FF 09 02 A1 01 85 06 09 02 15 00 26 FF 00 75 08 95 07 B1 02 C0 Signed-off-by: Arnoud Willemsen Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin

HID: Apply quirk HID_QUIRK_ALWAYS_POLL to Edifier QR30 (2d99:a101)

2026-02-11T12:41:49+00:00

[ Upstream commit 85a866809333cd2bf8ddac93d9a3e3ba8e4f807d ] The USB speaker has a bug that causes it to reboot when changing the brightness using the physical knob. Add a new vendor and product ID entry in hid-ids.h, and register the corresponding device in hid-quirks.c with the required quirk. Signed-off-by: Rodrigo Lugathe da Conceição Alves Reviewed-by: Terry Junge Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin

HID: quirks: Add another Chicony HP 5MP Cameras to hid_ignore_list

2026-02-11T12:41:49+00:00

[ Upstream commit c06bc3557542307b9658fbd43cc946a14250347b ] Another Chicony Electronics HP 5MP Camera with USB ID 04F2:B882 reports a HID sensor interface that is not actually implemented. Add the device to the HID ignore list so the bogus sensor is never exposed to userspace. Then the system won't hang when runtime PM tries to wake the unresponsive device. Signed-off-by: Chris Chiu Signed-off-by: Benjamin Tissoires Signed-off-by: Sasha Levin

HID: elecom: Add support for ELECOM M-XT3URBK (018F)

2025-11-18T16:54:49+00:00

The ELECOM M-XT3URBK trackball has an additional device ID (0x018F), which shares the same report descriptor as the existing device (0x00FB). However, the driver does not currently recognize this new ID, resulting in only five buttons being functional. This patch adds the new device ID so that all six buttons work properly. Signed-off-by: Naoki Ueki Signed-off-by: Jiri Kosina