kernel/linux.git/drivers/hid/Kconfig, branch v7.0-rc7

Merge branch 'for-6.20/elecom' into for-linus

2026-02-09T16:34:17+00:00

- support for new model of "Elecom Huge" trackball (David Phillips)

Merge branch 'for-6.20/sony' into for-linus

2026-02-09T16:33:26+00:00

- Support for Rock band 4 PS4 and PS5 guitars (Rosalie Wanders)

HID: elecom: Add support for ELECOM HUGE Plus M-HT1MRBK

2026-01-23T12:53:25+00:00

New model in the ELECOM HUGE trackball line that has 8 buttons but the report descriptor specifies only 5. The HUGE Plus supports connecting via Bluetooth, 2.4GHz wireless USB dongle, and directly via a USB-C cable. Each connection type reports a different device id, 01AA for cable, 01AB for USB dongle, and 01AC for Bluetooth. This patch adds these device IDs and applies the fixups similar to the other ELECOM devices to get all 8 buttons working for all 3 connection types. For reference, the usbhid-dump output: 001:013:001:DESCRIPTOR 1769085639.598405 05 01 09 02 A1 01 85 01 09 01 A1 00 05 09 19 01 29 05 15 00 25 01 75 01 95 05 81 02 75 03 95 01 81 01 05 01 09 30 09 31 16 01 80 26 FF 7F 75 10 95 02 81 06 09 38 15 81 25 7F 75 08 95 01 81 06 05 0C 0A 38 02 15 81 25 7F 75 08 95 01 81 06 C0 C0 05 0C 09 01 A1 01 85 02 15 01 26 8C 02 19 01 2A 8C 02 75 10 95 01 81 00 C0 05 01 09 80 A1 01 85 03 09 82 09 81 09 83 15 00 25 01 19 01 29 03 75 01 95 03 81 02 95 05 81 01 C0 06 01 FF 09 00 A1 01 85 08 09 00 15 00 26 FF 00 75 08 95 07 81 02 C0 06 02 FF 09 02 A1 01 85 06 09 02 15 00 26 FF 00 75 08 95 07 B1 02 C0 Signed-off-by: David Phillips Signed-off-by: Jiri Kosina

HID: sony: add support for Rock Band 4 PS4 and PS5 guitars

2026-01-10T09:22:13+00:00

This commit adds support for the PDP RiffMaster and the CRKD Gibson SG in both their PS4 and PS5 modes. These devices aren't mapped correctly without these changes, they also lack support for their whammy and tilt functionality which this patch adds support for by binding them to the left and right triggers. Signed-off-by: Rosalie Wanders Signed-off-by: Jiri Kosina

HID: rapoo: Add support for side buttons on RAPOO 0x2015 mouse

2026-01-10T08:52:37+00:00

This patch adds support for handling the side buttons on the RAPOO 0x2015 wireless mouse. These buttons were previously not generating input events due to missing driver logic. The new code handles raw HID input report with Report ID 1 and maps the side buttons to KEY_BACK and KEY_FORWARD using the input subsystem. Tested on a RAPOO mouse with USB ID 24AE:2015. Signed-off-by: Nguyen Dinh Dang Duong Signed-off-by: Jiri Kosina

Merge branch 'for-6.19/nintendo' into for-linus

2025-12-02T13:46:11+00:00

- switch to WQ_PERCPU workaueues (Marco Crivellari) - reduce potential initialization blocking time of hid-nintendo (Willy Huang)

Merge branch 'for-6.19/winwing' into for-linus

2025-12-02T13:44:04+00:00

- WinWing Orion2 throttle support improvement (Ivan Gorinov)

HID: evision: Fix Report Descriptor for Evision Wireless Receiver 320f:226f

2025-11-26T16:17:53+00:00

The mouse portion of the device's Report Descriptor declares 5 buttons but only declares 3 usages (Button 1 through Button 3). As a result events for the 2 side buttons are not generated. Detect and repair the Report Descriptor if necessary by changing the Usage Maximum value from Button 3 to Button 5. [jkosina@suse.com: standardize changelog a little bit] Reported-by: Artem Closes: https://lore.kernel.org/all/CADYkRmrfhRf6VmQjc+su+mepyv=TsHc+aMcL6ryRZ5HTZ8pyFg@mail.gmail.com/ Signed-off-by: Terry Junge Tested-by: Artem Signed-off-by: Jiri Kosina

Merge tag 'hid-for-linus-2025101701' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid

2025-10-18T18:18:18+00:00

Pull HID fixes from Jiri Kosina: - fix for sticky fingers handling in hid-multitouch (Benjamin Tissoires) - fix for reporting of 0 battery levels (Dmitry Torokhov) - build fix for hid-haptic in certain configurations (Jonathan Denose) - improved probe and avoiding spamming kernel log by hid-nintendo (Vicki Pfau) - fix for OOB in hid-cp2112 (Deepak Sharma) - interrupt handling fix for intel-thc-hid (Even Xu) - a couple of new device IDs and device-specific quirks * tag 'hid-for-linus-2025101701' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: logitech-hidpp: Add HIDPP_QUIRK_RESET_HI_RES_SCROLL selftests/hid: add tests for missing release on the Dell Synaptics HID: multitouch: fix sticky fingers HID: multitouch: fix name of Stylus input devices HID: hid-input: only ignore 0 battery events for digitizers HID: hid-debug: Fix spelling mistake "Rechargable" -> "Rechargeable" HID: Kconfig: Fix build error from CONFIG_HID_HAPTIC HID: nintendo: Rate limit IMU compensation message HID: nintendo: Wait longer for initial probe HID: core: Add printk_ratelimited variants to hid_warn() etc HID: quirks: Add ALWAYS_POLL quirk for VRS R295 steering wheel HID: quirks: avoid Cooler Master MM712 dongle wakeup bug HID: cp2112: Add parameter validation to data length HID: intel-thc-hid: intel-quickspi: Add ARL PCI Device Id's HID: intel-thc-hid: Intel-quickspi: switch first interrupt from level to edge detection HID: intel-thc-hid: intel-quicki2c: Fix wrong type casting

HID: Kconfig: Fix build error from CONFIG_HID_HAPTIC

2025-10-14T10:08:38+00:00

Temporarily change CONFIG_HID_HAPTIC to be bool instead of tristate, until we implement a permanent solution. Recently the CONFIG_HID_HAPTIC Kconfig option was reported as causing the following build errors: MODPOST Module.symvers ERROR: modpost: "hid_haptic_init" [drivers/hid/hid-multitouch.ko] undefined! ERROR: modpost: "hid_haptic_pressure_increase" [drivers/hid/hid-multitouch.ko] undefined! ERROR: modpost: "hid_haptic_check_pressure_unit" [drivers/hid/hid-multitouch.ko] undefined! ERROR: modpost: "hid_haptic_input_configured" [drivers/hid/hid-multitouch.ko] undefined! ERROR: modpost: "hid_haptic_input_mapping" [drivers/hid/hid-multitouch.ko] undefined! ERROR: modpost: "hid_haptic_feature_mapping" [drivers/hid/hid-multitouch.ko] undefined! ERROR: modpost: "hid_haptic_pressure_reset" [drivers/hid/hid-multitouch.ko] undefined! make[3]: *** [/home/thl/var/linux.dev/scripts/Makefile.modpost:147: Module.symvers] Error 1 when the kernel is compiled with the following configuration: CONFIG_HID=y CONFIG_HID_MULTITOUCH=m CONFIG_HID_HAPTIC=m To resolve this, temporarily change the CONFIG_HID_HAPTIC option to be bool, until we arrive at a permanent solution to enable CONFIG_HID_HAPTIC to be tristate. For a more detailed discussion, see [1]. [1]: https://lore.kernel.org/linux-input/auypydfkhx2eg7vp764way4batdilzc35inqda3exwzs3tk3ff@oagat6g46zto/ Signed-off-by: Jonathan Denose Signed-off-by: Jiri Kosina