kernel/linux.git/drivers/gpu, branch v5.10.182

drm/exynos: fix g2d_open/close helper function definitions

2023-05-30T11:57:52+00:00

[ Upstream commit 2ef0785b30bd6549ddbc124979f1b6596e065ae2 ] The empty stub functions are defined as global functions, which causes a warning because of missing prototypes: drivers/gpu/drm/exynos/exynos_drm_g2d.h:37:5: error: no previous prototype for 'g2d_open' drivers/gpu/drm/exynos/exynos_drm_g2d.h:42:5: error: no previous prototype for 'g2d_close' Mark them as 'static inline' to avoid the warning and to make them behave as intended. Fixes: eb4d9796fa34 ("drm/exynos: g2d: Convert to driver component API") Signed-off-by: Arnd Bergmann Reviewed-by: Andi Shyti Signed-off-by: Inki Dae Signed-off-by: Sasha Levin

drm/msm/dpu: Remove duplicate register defines from INTF

2023-05-30T11:57:51+00:00

[ Upstream commit 202c044203ac5860e3025169105368d99f9bc6a2 ] The INTF_FRAME_LINE_COUNT_EN, INTF_FRAME_COUNT and INTF_LINE_COUNT registers are already defined higher up, in the right place when sorted numerically. Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support") Signed-off-by: Marijn Suijten Reviewed-by: Konrad Dybcio Reviewed-by: Dmitry Baryshkov Reviewed-by: Abhinav Kumar Patchwork: https://patchwork.freedesktop.org/patch/534231/ Link: https://lore.kernel.org/r/20230411-dpu-intf-te-v4-8-27ce1a5ab5c6@somainline.org Signed-off-by: Abhinav Kumar Signed-off-by: Sasha Levin

drm/msm/dp: unregister audio driver during unbind

2023-05-30T11:57:51+00:00

[ Upstream commit 85c636284cb63b7740b4ae98881ace92158068d3 ] while binding the code always registers a audio driver, however there is no corresponding unregistration done in unbind. This leads to multiple redundant audio platform devices if dp_display_bind and dp_display_unbind happens multiple times during startup. On X13s platform this resulted in 6 to 9 audio codec device instead of just 3 codec devices for 3 dp ports. Fix this by unregistering codecs on unbind. Signed-off-by: Srinivas Kandagatla Fixes: d13e36d7d222 ("drm/msm/dp: add audio support for Display Port on MSM") Reviewed-by: Abhinav Kumar Patchwork: https://patchwork.freedesktop.org/patch/533324/ Link: https://lore.kernel.org/r/20230421145657.12186-1-srinivas.kandagatla@linaro.org Signed-off-by: Abhinav Kumar Signed-off-by: Sasha Levin

drm/amd: Fix an out of bounds error in BIOS parser

2023-05-30T11:57:48+00:00

[ Upstream commit d116db180decec1b21bba31d2ff495ac4d8e1b83 ] The array is hardcoded to 8 in atomfirmware.h, but firmware provides a bigger one sometimes. Deferencing the larger array causes an out of bounds error. commit 4fc1ba4aa589 ("drm/amd/display: fix array index out of bound error in bios parser") fixed some of this, but there are two other cases not covered by it. Fix those as well. Reported-by: erhard_f@mailbox.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=214853 Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2473 Signed-off-by: Mario Limonciello Reviewed-by: Harry Wentland Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin

drm/tegra: Avoid potential 32-bit integer overflow

2023-05-30T11:57:48+00:00

[ Upstream commit 2429b3c529da29d4277d519bd66d034842dcd70c ] In tegra_sor_compute_config(), the 32-bit value mode->clock is multiplied by 1000, and assigned to the u64 variable pclk. We can avoid a potential 32-bit integer overflow by casting mode->clock to u64 before we do the arithmetic and assignment. Signed-off-by: Nur Hussein Signed-off-by: Thierry Reding Signed-off-by: Sasha Levin

drm/amd/display: Use DC_LOG_DC in the trasform pixel function

2023-05-30T11:57:47+00:00

[ Upstream commit 7222f5841ff49709ca666b05ff336776e0664a20 ] [Why & How] DC now uses a new commit sequence which is more robust since it addresses cases where we need to reorganize pipes based on planes and other parameters. As a result, this new commit sequence reset the DC state by cleaning plane states and re-creating them accordingly with the need. For this reason, the dce_transform_set_pixel_storage_depth can be invoked after a plane state is destroyed and before its re-creation. In this situation and on DCE devices, DC will hit a condition that will trigger a dmesg log that looks like this: Console: switching to colour frame buffer device 240x67 ------------[ cut here ]------------ [..] Hardware name: System manufacturer System Product Name/PRIME X370-PRO, BIOS 5603 07/28/2020 RIP: 0010:dce_transform_set_pixel_storage_depth+0x3f8/0x480 [amdgpu] [..] RSP: 0018:ffffc9000202b850 EFLAGS: 00010293 RAX: ffffffffa081d100 RBX: ffff888110790000 RCX: 000000000000000c RDX: ffff888100bedbf8 RSI: 0000000000001a50 RDI: ffff88810463c900 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000007 R10: 0000000000000001 R11: 0000000000000f00 R12: ffff88810f500010 R13: ffff888100bedbf8 R14: ffff88810f515688 R15: 0000000000000000 FS: 00007ff0159249c0(0000) GS:ffff88840e940000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ff01528e550 CR3: 0000000002a10000 CR4: 00000000003506e0 Call Trace: ? dm_write_reg_func+0x21/0x80 [amdgpu 340dadd3f7c8cf4be11cf0bdc850245e99abe0e8] dc_stream_set_dither_option+0xfb/0x130 [amdgpu 340dadd3f7c8cf4be11cf0bdc850245e99abe0e8] amdgpu_dm_crtc_configure_crc_source+0x10b/0x190 [amdgpu 340dadd3f7c8cf4be11cf0bdc850245e99abe0e8] amdgpu_dm_atomic_commit_tail+0x20a8/0x2a90 [amdgpu 340dadd3f7c8cf4be11cf0bdc850245e99abe0e8] ? free_unref_page_commit+0x98/0x170 ? free_unref_page+0xcc/0x150 commit_tail+0x94/0x120 drm_atomic_helper_commit+0x10f/0x140 drm_atomic_commit+0x94/0xc0 ? drm_plane_get_damage_clips.cold+0x1c/0x1c drm_client_modeset_commit_atomic+0x203/0x250 drm_client_modeset_commit_locked+0x56/0x150 drm_client_modeset_commit+0x21/0x40 drm_fb_helper_lastclose+0x42/0x70 amdgpu_driver_lastclose_kms+0xa/0x10 [amdgpu 340dadd3f7c8cf4be11cf0bdc850245e99abe0e8] drm_release+0xda/0x110 __fput+0x89/0x240 task_work_run+0x5c/0x90 do_exit+0x333/0xae0 do_group_exit+0x2d/0x90 __x64_sys_exit_group+0x14/0x20 do_syscall_64+0x5b/0x80 ? exit_to_user_mode_prepare+0x1e/0x140 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7ff016ceaca1 Code: Unable to access opcode bytes at RIP 0x7ff016ceac77. RSP: 002b:00007ffe7a2357e8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 00007ff016e15a00 RCX: 00007ff016ceaca1 RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000 RBP: 0000000000000000 R08: ffffffffffffff78 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007ff016e15a00 R13: 0000000000000000 R14: 00007ff016e1aee8 R15: 00007ff016e1af00 Since this issue only happens in a transition state on DC, this commit replace BREAK_TO_DEBUGGER with DC_LOG_DC. Reviewed-by: Harry Wentland Acked-by: Qingqing Zhuo Signed-off-by: Rodrigo Siqueira Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin

drm/i915/dp: prevent potential div-by-zero

2023-05-30T11:57:46+00:00

[ Upstream commit 0ff80028e2702c7c3d78b69705dc47c1ccba8c39 ] drm_dp_dsc_sink_max_slice_count() may return 0 if something goes wrong on the part of the DSC sink and its DPCD register. This null value may be later used as a divisor in intel_dsc_compute_params(), which will lead to an error. In the unlikely event that this issue occurs, fix it by testing the return value of drm_dp_dsc_sink_max_slice_count() against zero. Found by Linux Verification Center (linuxtesting.org) with static analysis tool SVACE. Fixes: a4a157777c80 ("drm/i915/dp: Compute DSC pipe config in atomic check") Signed-off-by: Nikita Zhandarovich Reviewed-by: Rodrigo Vivi Signed-off-by: Rodrigo Vivi Link: https://patchwork.freedesktop.org/patch/msgid/20230418140430.69902-1-n.zhandarovich@fintech.ru (cherry picked from commit 51f7008239de011370c5067bbba07f0207f06b72) Signed-off-by: Joonas Lahtinen Signed-off-by: Sasha Levin

drm/mipi-dsi: Set the fwnode for mipi_dsi_device

2023-05-30T11:57:45+00:00

[ Upstream commit a26cc2934331b57b5a7164bff344f0a2ec245fc0 ] After commit 3fb16866b51d ("driver core: fw_devlink: Make cycle detection more robust"), fw_devlink prints an error when consumer devices don't have their fwnode set. This used to be ignored silently. Set the fwnode mipi_dsi_device so fw_devlink can find them and properly track their dependencies. This fixes errors like this: [ 0.334054] nwl-dsi 30a00000.mipi-dsi: Failed to create device link with regulator-lcd-1v8 [ 0.346964] nwl-dsi 30a00000.mipi-dsi: Failed to create device link with backlight-dsi Reported-by: Martin Kepplinger Link: https://lore.kernel.org/lkml/2a8e407f4f18c9350f8629a2b5fa18673355b2ae.camel@puri.sm/ Fixes: 068a00233969 ("drm: Add MIPI DSI bus support") Signed-off-by: Saravana Kannan Tested-by: Martin Kepplinger Link: https://lore.kernel.org/r/20230310063910.2474472-1-saravanak@google.com Signed-off-by: Maxime Ripard Signed-off-by: Sasha Levin

drm/amd/display: Fix hang when skipping modeset

2023-05-17T09:48:19+00:00

commit da5e14909776edea4462672fb4a3007802d262e7 upstream. [Why&How] When skipping full modeset since the only state change was a front porch change, the DC commit sequence requires extra checks to handle non existant plane states being asked to be removed from context. Reviewed-by: Alvin Lee Acked-by: Qingqing Zhuo Signed-off-by: Aurabindo Pillai Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher Signed-off-by: Greg Kroah-Hartman

drm/exynos: move to use request_irq by IRQF_NO_AUTOEN flag

2023-05-17T09:48:19+00:00

commit a4e5eed2c6a689ef2b6ad8d7ae86665c69039379 upstream. After this patch cbe16f35bee68 genirq: Add IRQF_NO_AUTOEN for request_irq/nmi() is merged. request_irq() after setting IRQ_NOAUTOEN as below irq_set_status_flags(irq, IRQ_NOAUTOEN); request_irq(dev, irq...); can be replaced by request_irq() with IRQF_NO_AUTOEN flag. v2: Fix the problem of using wrong flags Signed-off-by: Tian Tao Signed-off-by: Inki Dae Signed-off-by: Greg Kroah-Hartman