kernel/linux.git/drivers/gpu, branch v4.9.232

drm/nouveau/i2c/g94-: increase NV_PMGR_DP_AUXCTL_TRANSACTREQ timeout

2020-07-31T14:44:02+00:00

[ Upstream commit 0156e76d388310a490aeb0f2fbb5b284ded3aecc ] Tegra TRM says worst-case reply time is 1216us, and this should fix some spurious timeouts that have been popping up. Signed-off-by: Ben Skeggs Signed-off-by: Sasha Levin

drm/radeon: fix double free

2020-07-22T07:10:47+00:00

commit 41855a898650803e24b284173354cc3e44d07725 upstream. clang static analysis flags this error drivers/gpu/drm/radeon/ci_dpm.c:5652:9: warning: Use of memory after it is freed [unix.Malloc] kfree(rdev->pm.dpm.ps[i].ps_priv); ^~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/radeon/ci_dpm.c:5654:2: warning: Attempt to free released memory [unix.Malloc] kfree(rdev->pm.dpm.ps); ^~~~~~~~~~~~~~~~~~~~~~ problem is reported in ci_dpm_fini, with these code blocks. for (i = 0; i < rdev->pm.dpm.num_ps; i++) { kfree(rdev->pm.dpm.ps[i].ps_priv); } kfree(rdev->pm.dpm.ps); The first free happens in ci_parse_power_table where it cleans up locally on a failure. ci_dpm_fini also does a cleanup. ret = ci_parse_power_table(rdev); if (ret) { ci_dpm_fini(rdev); return ret; } So remove the cleanup in ci_parse_power_table and move the num_ps calculation to inside the loop so ci_dpm_fini will know how many array elements to free. Fixes: cc8dbbb4f62a ("drm/radeon: add dpm support for CI dGPUs (v2)") Signed-off-by: Tom Rix Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

gpu: host1x: Detach driver on unregister

2020-07-22T07:10:44+00:00

[ Upstream commit d9a0a05bf8c76e6dc79230669a8b5d685b168c30 ] Currently when a host1x device driver is unregistered, it is not detached from the host1x controller, which means that the device will stay around and when the driver is registered again, it may bind to the old, stale device rather than the new one that was created from scratch upon driver registration. This in turn can cause various weird crashes within the driver core because it is confronted with a device that was already deleted. Fix this by detaching the driver from the host1x controller when it is unregistered. This ensures that the deleted device also is no longer present in the device list that drivers will bind to. Reported-by: Sowjanya Komatineni Signed-off-by: Thierry Reding Tested-by: Sowjanya Komatineni Signed-off-by: Thierry Reding Signed-off-by: Sasha Levin

drm/radeon: fix fb_div check in ni_init_smc_spll_table()

2020-06-30T19:38:45+00:00

commit 35f760b44b1b9cb16a306bdcc7220fbbf78c4789 upstream. clk_s is checked twice in a row in ni_init_smc_spll_table(). fb_div should be checked instead. Fixes: 69e0b57a91ad ("drm/radeon/kms: add dpm support for cayman (v5)") Cc: stable@vger.kernel.org Signed-off-by: Denis Efremov Signed-off-by: Alex Deucher Signed-off-by: Greg Kroah-Hartman

drm/i915: Whitelist context-local timestamp in the gen9 cmdparser

2020-06-30T19:38:32+00:00

commit 273500ae71711c040d258a7b3f4b6f44c368fff2 upstream. Allow batch buffers to read their own _local_ cumulative HW runtime of their logical context. Fixes: 0f2f39758341 ("drm/i915: Add gen9 BCS cmdparsing") Signed-off-by: Chris Wilson Cc: Mika Kuoppala Cc: # v5.4+ Reviewed-by: Mika Kuoppala Link: https://patchwork.freedesktop.org/patch/msgid/20200601161942.30854-1-chris@chris-wilson.co.uk (cherry picked from commit f9496520df11de00fbafc3cbd693b9570d600ab3) Signed-off-by: Joonas Lahtinen Signed-off-by: Greg Kroah-Hartman

drm/dp_mst: Increase ACT retry timeout to 3s

2020-06-30T19:38:31+00:00

[ Upstream commit 873a95e0d59ac06901ae261dda0b7165ffd002b8 ] Currently we only poll for an ACT up to 30 times, with a busy-wait delay of 100µs between each attempt - giving us a timeout of 2900µs. While this might seem sensible, it would appear that in certain scenarios it can take dramatically longer then that for us to receive an ACT. On one of the EVGA MST hubs that I have available, I observed said hub sometimes taking longer then a second before signalling the ACT. These delays mostly seem to occur when previous sideband messages we've sent are NAKd by the hub, however it wouldn't be particularly surprising if it's possible to reproduce times like this simply by introducing branch devices with large LCTs since payload allocations have to take effect on every downstream device up to the payload's target. So, instead of just retrying 30 times we poll for the ACT for up to 3ms, and additionally use usleep_range() to avoid a very long and rude busy-wait. Note that the previous retry count of 30 appears to have been arbitrarily chosen, as I can't find any mention of a recommended timeout or retry count for ACTs in the DisplayPort 2.0 specification. This also goes for the range we were previously using for udelay(), although I suspect that was just copied from the recommended delay for link training on SST devices. Changes since v1: * Use readx_poll_timeout() instead of open-coding timeout loop - Sean Paul Changes since v2: * Increase poll interval to 200us - Sean Paul * Print status in hex when we timeout waiting for ACT - Sean Paul Signed-off-by: Lyude Paul Fixes: ad7f8a1f9ced ("drm/helper: add Displayport multi-stream helper (v0.6)") Cc: Sean Paul Cc: # v3.17+ Reviewed-by: Sean Paul Link: https://patchwork.freedesktop.org/patch/msgid/20200406221253.1307209-4-lyude@redhat.com Signed-off-by: Sasha Levin

drm/qxl: Use correct notify port address when creating cursor ring

2020-06-30T19:38:31+00:00

commit 80e5f89da3ab949fbbf1cae01dfaea29f5483a75 upstream. The command ring and cursor ring use different notify port addresses definition: QXL_IO_NOTIFY_CMD and QXL_IO_NOTIFY_CURSOR. However, in qxl_device_init() we use QXL_IO_NOTIFY_CMD to create both command ring and cursor ring. This doesn't cause any problems now, because QEMU's behaviors on QXL_IO_NOTIFY_CMD and QXL_IO_NOTIFY_CURSOR are the same. However, QEMU's behavior may be change in future, so let's fix it. P.S.: In the X.org QXL driver, the notify port address of cursor ring is correct. Signed-off-by: Huacai Chen Cc: Link: http://patchwork.freedesktop.org/patch/msgid/1585635488-17507-1-git-send-email-chenhc@lemote.com Signed-off-by: Gerd Hoffmann Signed-off-by: Greg Kroah-Hartman

drm/dp_mst: Reformat drm_dp_check_act_status() a bit

2020-06-30T19:38:31+00:00

commit a5cb5fa6c3a5c2cf492db667b8670ee7b044b79f upstream. Just add a bit more line wrapping, get rid of some extraneous whitespace, remove an unneeded goto label, and move around some variable declarations. No functional changes here. Signed-off-by: Lyude Paul [this isn't a fix, but it's needed for the fix that comes after this] Fixes: ad7f8a1f9ced ("drm/helper: add Displayport multi-stream helper (v0.6)") Cc: Sean Paul Cc: # v3.17+ Reviewed-by: Sean Paul Link: https://patchwork.freedesktop.org/patch/msgid/20200406221253.1307209-3-lyude@redhat.com Signed-off-by: Greg Kroah-Hartman

drm: encoder_slave: fix refcouting error for modules

2020-06-30T19:38:31+00:00

[ Upstream commit f78d4032de60f50fd4afaa0fb68ea03b985f820a ] module_put() balances try_module_get(), not request_module(). Fix the error path to match that. Fixes: 2066facca4c7 ("drm/kms: slave encoder interface.") Signed-off-by: Wolfram Sang Reviewed-by: Emil Velikov Acked-by: Daniel Vetter Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin

drm/msm/mdp5: Fix mdp5_init error path for failed mdp5_kms allocation

2020-06-30T19:38:25+00:00

[ Upstream commit e4337877c5d578722c0716f131fb774522013cf5 ] When allocation for mdp5_kms fails, calling mdp5_destroy() leads to undefined behaviour, likely a nullptr exception or use-after-free troubles. Signed-off-by: Roy Spliet Reviewed-by: Abhinav Kumar Signed-off-by: Rob Clark Signed-off-by: Sasha Levin