kernel/linux.git/drivers/gpu, branch v4.9.168

drm/dp/mst: Configure no_stop_bit correctly for remote i2c xfers

2019-04-05T20:29:15+00:00

[ Upstream commit c978ae9bde582e82a04c63a4071701691dd8b35c ] We aren't supposed to force a stop+start between every i2c msg when performing multi message transfers. This should eg. cause the DDC segment address to be reset back to 0 between writing the segment address and reading the actual EDID extension block. To quote the E-DDC spec: "... this standard requires that the segment pointer be reset to 00h when a NO ACK or a STOP condition is received." Since we're going to touch this might as well consult the I2C_M_STOP flag to determine whether we want to force the stop or not. Cc: Brian Vincent References: https://bugs.freedesktop.org/show_bug.cgi?id=108081 Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20180928180403.22499-1-ville.syrjala@linux.intel.com Reviewed-by: Dhinakaran Pandiyan Signed-off-by: Sasha Levin

drm/nouveau: Stop using drm_crtc_force_disable

2019-04-05T20:29:14+00:00

[ Upstream commit 934c5b32a5e43d8de2ab4f1566f91d7c3bf8cb64 ] The correct way for legacy drivers to update properties that need to do a full modeset, is to do a full modeset. Note that we don't need to call the drm_mode_config_internal helper because we're not changing any of the refcounted paramters. v2: Fixup error handling (Ville). Since the old code didn't bother I decided to just delete it instead of adding even more code for just error handling. Cc: Ville Syrjälä Reviewed-by: Alex Deucher (v1) Cc: Sean Paul Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20181217194303.14397-2-daniel.vetter@ffwll.ch Signed-off-by: Sasha Levin

drm/vmwgfx: Don't double-free the mode stored in par->set_mode

2019-03-27T05:13:01+00:00

commit c2d311553855395764e2e5bf401d987ba65c2056 upstream. When calling vmw_fb_set_par(), the mode stored in par->set_mode gets free'd twice. The first free is in vmw_fb_kms_detach(), the second is near the end of vmw_fb_set_par() under the name of 'old_mode'. The mode-setting code only works correctly if the mode doesn't actually change. Removing 'old_mode' in favor of using par->set_mode directly fixes the problem. Cc: Fixes: a278724aa23c ("drm/vmwgfx: Implement fbdev on kms v2") Signed-off-by: Thomas Zimmermann Reviewed-by: Deepak Rawat Signed-off-by: Thomas Hellstrom Signed-off-by: Greg Kroah-Hartman

drm/radeon/evergreen_cs: fix missing break in switch statement

2019-03-23T12:19:54+00:00

commit cc5034a5d293dd620484d1d836aa16c6764a1c8c upstream. Add missing break statement in order to prevent the code from falling through to case CB_TARGET_MASK. This bug was found thanks to the ongoing efforts to enable -Wimplicit-fallthrough. Fixes: dd220a00e8bd ("drm/radeon/kms: add support for streamout v7") Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva Signed-off-by: Alex Deucher Signed-off-by: Greg Kroah-Hartman

drm/i915: Relax mmap VMA check

2019-03-23T12:19:50+00:00

[ Upstream commit ca22f32a6296cbfa29de56328c8505560a18cfa8 ] Legacy behaviour was to allow non-page-aligned mmap requests, as does the linux mmap(2) implementation by virtue of automatically rounding up for the caller. To avoid breaking legacy userspace relax the newly introduced fix. Signed-off-by: Tvrtko Ursulin Fixes: 5c4604e757ba ("drm/i915: Prevent a race during I915_GEM_MMAP ioctl with WC set") Reported-by: Guenter Roeck Cc: Adam Zabrocki Cc: Joonas Lahtinen Cc: # v4.0+ Cc: Akash Goel Cc: Chris Wilson Cc: Jani Nikula Cc: Rodrigo Vivi Cc: intel-gfx@lists.freedesktop.org Reviewed-by: Chris Wilson Link: https://patchwork.freedesktop.org/patch/msgid/20190305110409.28633-1-tvrtko.ursulin@linux.intel.com (cherry picked from commit a90e1948efb648f567444f87f3c19b2a0787affd) Signed-off-by: Rodrigo Vivi Signed-off-by: Sasha Levin

gpu: ipu-v3: Fix CSI offsets for imx53

2019-03-23T12:19:41+00:00

[ Upstream commit bb867d219fda7fbaabea3314702474c4eac2b91d ] The CSI offsets are wrong for both CSI0 and CSI1. They are at physical address 0x1e030000 and 0x1e038000 respectively. Fixes: 2ffd48f2e7 ("gpu: ipu-v3: Add Camera Sensor Interface unit") Signed-off-by: Steve Longerbeam Signed-off-by: Philipp Zabel Signed-off-by: Sasha Levin

gpu: ipu-v3: Fix i.MX51 CSI control registers offset

2019-03-23T12:19:41+00:00

[ Upstream commit 2c0408dd0d8906b26fe8023889af7adf5e68b2c2 ] The CSI0/CSI1 registers offset is at +0xe030000/+0xe038000 relative to the control module registers on IPUv3EX. This patch fixes wrong values for i.MX51 CSI0/CSI1. Fixes: 2ffd48f2e7 ("gpu: ipu-v3: Add Camera Sensor Interface unit") Signed-off-by: Alexander Shiyan Signed-off-by: Philipp Zabel Signed-off-by: Sasha Levin

drm/sun4i: tcon: Prepare and enable TCON channel 0 clock at init

2019-03-13T21:04:59+00:00

[ Upstream commit b14e945bda8ae227d1bf2b1837c0c4a61721cd1a ] When initializing clocks, a reference to the TCON channel 0 clock is obtained. However, the clock is never prepared and enabled later. Switching from simplefb to DRM actually disables the clock (that was usually configured by U-Boot) because of that. On the V3s, this results in a hang when writing to some mixer registers when switching over to DRM from simplefb. Fix this by preparing and enabling the clock when initializing other clocks. Waiting for sun4i_tcon_channel_enable to enable the clock is apparently too late and results in the same mixer register access hang. Signed-off-by: Paul Kocialkowski Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20190131132550.26355-1-paul.kocialkowski@bootlin.com Signed-off-by: Sasha Levin

drm/msm: Unblock writer if reader closes file

2019-03-05T16:57:03+00:00

[ Upstream commit 99c66bc051e7407fe0bf0607b142ec0be1a1d1dd ] Prevents deadlock when fifo is full and reader closes file. Signed-off-by: Kristian H. Kristensen Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm/i915: Fix enum pipe vs. enum transcoder for the PCH transcoder

2019-02-27T09:07:02+00:00

commit 41c32e5da3ff3922490341a988b2a3ae46d0b6a8 upstream. Use enum pipe for PCH transcoders also in the FIFO underrun code. Fixes the following new sparse warnings: intel_fifo_underrun.c:340:49: warning: mixing different enum types intel_fifo_underrun.c:340:49: int enum pipe versus intel_fifo_underrun.c:340:49: int enum transcoder intel_fifo_underrun.c:344:49: warning: mixing different enum types intel_fifo_underrun.c:344:49: int enum pipe versus intel_fifo_underrun.c:344:49: int enum transcoder intel_fifo_underrun.c:397:57: warning: mixing different enum types intel_fifo_underrun.c:397:57: int enum pipe versus intel_fifo_underrun.c:397:57: int enum transcoder intel_fifo_underrun.c:398:17: warning: mixing different enum types intel_fifo_underrun.c:398:17: int enum pipe versus intel_fifo_underrun.c:398:17: int enum transcoder Cc: Matthias Kaehlcke Fixes: a21960339c8c ("drm/i915: Consistently use enum pipe for PCH transcoders") Signed-off-by: "Ville Syrjälä" Link: https://patchwork.freedesktop.org/patch/msgid/20170901143123.7590-3-ville.syrjala@linux.intel.com Reviewed-by: Chris Wilson [nc: Backport to 4.9, drop unneeded hunks] Signed-off-by: Nathan Chancellor Signed-off-by: Greg Kroah-Hartman