kernel/linux.git/drivers/gpu, branch v4.19.57

drm/vmwgfx: Use the backdoor port if the HB port is not available

2019-06-25T03:36:01+00:00

commit cc0ba0d8624f210995924bb57a8b181ce8976606 upstream. The HB port may not be available for various reasons. Either it has been disabled by a config option or by the hypervisor for other reasons. In that case, make sure we have a backup plan and use the backdoor port instead with a performance penalty. Cc: stable@vger.kernel.org Fixes: 89da76fde68d ("drm/vmwgfx: Add VMWare host messaging capability") Signed-off-by: Thomas Hellstrom Reviewed-by: Deepak Rawat Signed-off-by: Greg Kroah-Hartman

drm/arm/hdlcd: Allow a bit of clock tolerance

2019-06-25T03:35:58+00:00

[ Upstream commit 1c810739097fdeb31b393b67a0a1e3d7ffdd9f63 ] On the Arm Juno platform, the HDLCD pixel clock is constrained to 250KHz resolution in order to avoid the tiny System Control Processor spending aeons trying to calculate exact PLL coefficients. This means that modes like my oddball 1600x1200 with 130.89MHz clock get rejected since the rate cannot be matched exactly. In practice, though, this mode works quite happily with the clock at 131MHz, so let's relax the check to allow a little bit of slop. Signed-off-by: Robin Murphy Signed-off-by: Liviu Dudau Signed-off-by: Sasha Levin

drm/arm/hdlcd: Actually validate CRTC modes

2019-06-25T03:35:58+00:00

[ Upstream commit b96151edced4edb6a18aa89a5fa02c7066efff45 ] Rather than allowing any old mode through, then subsequently refusing unmatchable clock rates in atomic_check when it's too late to back out and pick a different mode, let's do that validation up-front where it will cause unsupported modes to be correctly pruned in the first place. This also eliminates an issue whereby a perceived clock rate of 0 would cause atomic disable to fail and prevent the module from being unloaded. Signed-off-by: Robin Murphy Signed-off-by: Liviu Dudau Signed-off-by: Sasha Levin

drm/arm/mali-dp: Add a loop around the second set CVAL and try 5 times

2019-06-25T03:35:58+00:00

[ Upstream commit 6a88e0c14813d00f8520d0e16cd4136c6cf8b4d4 ] This patch trying to fix monitor freeze issue caused by drm error 'flip_done timed out' on LS1028A platform. this set try is make a loop around the second setting CVAL and try like 5 times before giveing up. Signed-off-by: Wen He Signed-off-by: Liviu Dudau Signed-off-by: Sasha Levin

drm/etnaviv: lock MMU while dumping core

2019-06-22T06:15:17+00:00

[ Upstream commit 1396500d673bd027683a0609ff84dca7eb6ea2e7 ] The devcoredump needs to operate on a stable state of the MMU while it is writing the MMU state to the coredump. The missing lock allowed both the userspace submit, as well as the GPU job finish paths to mutate the MMU state while a coredump is under way. Fixes: a8c21a5451d8 (drm/etnaviv: add initial etnaviv DRM driver) Reported-by: David Jander Signed-off-by: Lucas Stach Tested-by: David Jander Reviewed-by: Philipp Zabel Signed-off-by: Sasha Levin

drm: add fallback override/firmware EDID modes workaround

2019-06-19T06:18:07+00:00

commit 48eaeb7664c76139438724d520a1ea4a84a3ed92 upstream. We've moved the override and firmware EDID (simply "override EDID" from now on) handling to the low level drm_do_get_edid() function in order to transparently use the override throughout the stack. The idea is that you get the override EDID via the ->get_modes() hook. Unfortunately, there are scenarios where the DDC probe in drm_get_edid() called via ->get_modes() fails, although the preceding ->detect() succeeds. In the case reported by Paul Wise, the ->detect() hook, intel_crt_detect(), relies on hotplug detect, bypassing the DDC. In the case reported by Ilpo Järvinen, there is no ->detect() hook, which is interpreted as connected. The subsequent DDC probe reached via ->get_modes() fails, and we don't even look at the override EDID, resulting in no modes being added. Because drm_get_edid() is used via ->detect() all over the place, we can't trivially remove the DDC probe, as it leads to override EDID effectively meaning connector forcing. The goal is that connector forcing and override EDID remain orthogonal. Generally, the underlying problem here is the conflation of ->detect() and ->get_modes() via drm_get_edid(). The former should just detect, and the latter should just get the modes, typically via reading the EDID. As long as drm_get_edid() is used in ->detect(), it needs to retain the DDC probe. Or such users need to have a separate DDC probe step first. The EDID caching between ->detect() and ->get_modes() done by some drivers is a further complication that prevents us from making drm_do_get_edid() adapt to the two cases. Work around the regression by falling back to a separate attempt at getting the override EDID at drm_helper_probe_single_connector_modes() level. With a working DDC and override EDID, it'll never be called; the override EDID will come via ->get_modes(). There will still be a failing DDC probe attempt in the cases that require the fallback. v2: - Call drm_connector_update_edid_property (Paul) - Update commit message about EDID caching (Daniel) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107583 Reported-by: Paul Wise Cc: Paul Wise References: http://mid.mail-archive.com/alpine.DEB.2.20.1905262211270.24390@whs-18.cs.helsinki.fi Reported-by: Ilpo Järvinen Cc: Ilpo Järvinen Suggested-by: Daniel Vetter References: 15f080f08d48 ("drm/edid: respect connector force for drm_get_edid ddc probe") Fixes: 53fd40a90f3c ("drm: handle override and firmware EDID at drm_do_get_edid() level") Cc: # v4.15+ 56a2b7f2a39a drm/edid: abstract override/firmware EDID retrieval Cc: # v4.15+ Cc: Daniel Vetter Cc: Ville Syrjälä Cc: Harish Chegondi Tested-by: Paul Wise Reviewed-by: Daniel Vetter Signed-off-by: Jani Nikula Link: https://patchwork.freedesktop.org/patch/msgid/20190610093054.28445-1-jani.nikula@intel.com Signed-off-by: Greg Kroah-Hartman

drm/edid: abstract override/firmware EDID retrieval

2019-06-19T06:18:07+00:00

commit 56a2b7f2a39a8d4b16a628e113decde3d7400879 upstream. Abstract the debugfs override and the firmware EDID retrieval function. We'll be needing it in the follow-up. No functional changes. Cc: Daniel Vetter Cc: Harish Chegondi Reviewed-by: Daniel Vetter Tested-by: Tested-by: Paul Wise Signed-off-by: Jani Nikula Link: https://patchwork.freedesktop.org/patch/msgid/20190607110513.12072-1-jani.nikula@intel.com Signed-off-by: Greg Kroah-Hartman

drm/vmwgfx: NULL pointer dereference from vmw_cmd_dx_view_define()

2019-06-19T06:18:05+00:00

commit bcd6aa7b6cbfd6f985f606c6f76046d782905820 upstream. If SVGA_3D_CMD_DX_DEFINE_RENDERTARGET_VIEW is called with a surface ID of SVGA3D_INVALID_ID, the srf struct will remain NULL after vmw_cmd_res_check(), leading to a null pointer dereference in vmw_view_add(). Cc: Fixes: d80efd5cb3de ("drm/vmwgfx: Initial DX support") Signed-off-by: Murray McAllister Reviewed-by: Thomas Hellstrom Signed-off-by: Thomas Hellstrom Signed-off-by: Greg Kroah-Hartman

drm/vmwgfx: integer underflow in vmw_cmd_dx_set_shader() leading to an invalid read

2019-06-19T06:18:05+00:00

commit 5ed7f4b5eca11c3c69e7c8b53e4321812bc1ee1e upstream. If SVGA_3D_CMD_DX_SET_SHADER is called with a shader ID of SVGA3D_INVALID_ID, and a shader type of SVGA3D_SHADERTYPE_INVALID, the calculated binding.shader_slot will be 4294967295, leading to an out-of-bounds read in vmw_binding_loc() when the offset is calculated. Cc: Fixes: d80efd5cb3de ("drm/vmwgfx: Initial DX support") Signed-off-by: Murray McAllister Reviewed-by: Thomas Hellstrom Signed-off-by: Thomas Hellstrom Signed-off-by: Greg Kroah-Hartman

drm/i915/sdvo: Implement proper HDMI audio support for SDVO

2019-06-19T06:18:01+00:00

commit d74408f528261f900dddb9778f61b5c5a7a6249c upstream. Our SDVO audio support is pretty bogus. We can't push audio over the SDVO bus, so trying to enable audio in the SDVO control register doesn't do anything. In fact it looks like the SDVO encoder will always mix in the audio coming over HDA, and there's no (at least documented) way to disable that from our side. So HDMI audio does work currently on gen4 but only by luck really. On gen3 it got broken by the referenced commit. And what has always been missing on every platform is the ELD. To pass the ELD to the audio driver we need to write it to magic buffer in the SDVO encoder hardware which then gets pulled out via HDA in the other end. Ie. pretty much the same thing we had for native HDMI before we started to just pass the ELD between the drivers. This sort of explains why we even have that silly hardware buffer with native HDMI. $ cat /proc/asound/card0/eld#1.0 -monitor_present 0 -eld_valid 0 +monitor_present 1 +eld_valid 1 +monitor_name LG TV +connection_type HDMI +... This also fixes our state readout since we can now query the SDVO encoder about the state of the "ELD valid" and "presence detect" bits. As mentioned those don't actually control whether audio gets sent over the HDMI cable, but it's the best we can do. And with the state checker appeased we can re-enable HDMI audio for gen3. Cc: stable@vger.kernel.org Cc: Daniel Vetter Cc: zardam@gmail.com Tested-by: zardam@gmail.com Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108976 Fixes: de44e256b92c ("drm/i915/sdvo: Shut up state checker with hdmi cards on gen3") Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20190409144054.24561-3-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak (cherry picked from commit dc49a56bd43bb04982e64b44436831da801d0237) Signed-off-by: Jani Nikula Signed-off-by: Greg Kroah-Hartman