kernel/linux.git/drivers/gpu, branch v4.19.112

drm/i915/gvt: Fix unnecessary schedule timer when no vGPU exits

2020-03-18T06:14:23+00:00

commit 04d6067f1f19e70a418f92fa3170cf7fe53b7fdf upstream. From commit f25a49ab8ab9 ("drm/i915/gvt: Use vgpu_lock to protect per vgpu access") the vgpu idr destroy is moved later than vgpu resource destroy, then it would fail to stop timer for schedule policy clean which to check vgpu idr for any left vGPU. So this trys to destroy vgpu idr earlier. Cc: Colin Xu Fixes: f25a49ab8ab9 ("drm/i915/gvt: Use vgpu_lock to protect per vgpu access") Acked-by: Colin Xu Signed-off-by: Zhenyu Wang Link: http://patchwork.freedesktop.org/patch/msgid/20200229055445.31481-1-zhenyuw@linux.intel.com Signed-off-by: Greg Kroah-Hartman

drm/amd/display: remove duplicated assignment to grph_obj_type

2020-03-18T06:14:20+00:00

commit d785476c608c621b345dd9396e8b21e90375cb0e upstream. Variable grph_obj_type is being assigned twice, one of these is redundant so remove it. Addresses-Coverity: ("Evaluation order violation") Signed-off-by: Colin Ian King Signed-off-by: Alex Deucher Cc: Signed-off-by: Greg Kroah-Hartman

drm/sun4i: de2/de3: Remove unsupported VI layer formats

2020-03-11T13:15:10+00:00

commit a4769905f0ae32cae4f096f646ab03b8b4794c74 upstream. YUV444 and YVU444 are planar formats, but HW format RGB888 is packed. This means that those two mappings were never correct. Remove them. Fixes: 60a3dcf96aa8 ("drm/sun4i: Add DE2 definitions for YUV formats") Acked-by: Maxime Ripard Signed-off-by: Jernej Skrabec Link: https://patchwork.freedesktop.org/patch/msgid/20200224173901.174016-2-jernej.skrabec@siol.net Signed-off-by: Greg Kroah-Hartman

drm/sun4i: Fix DE2 VI layer format support

2020-03-11T13:15:09+00:00

commit 20896ef137340e9426cf322606f764452f5eb960 upstream. DE2 VI layer doesn't support blending which means alpha channel is ignored. Replace all formats with alpha with "don't care" (X) channel. Fixes: 7480ba4d7571 ("drm/sun4i: Add support for DE2 VI planes") Acked-by: Maxime Ripard Signed-off-by: Jernej Skrabec Link: https://patchwork.freedesktop.org/patch/msgid/20200224173901.174016-4-jernej.skrabec@siol.net Signed-off-by: Greg Kroah-Hartman

drm/msm/dsi/pll: call vco set rate explicitly

2020-03-11T13:14:51+00:00

[ Upstream commit c6659785dfb3f8d75f1fe637e4222ff8178f5280 ] For a given byte clock, if VCO recalc value is exactly same as vco set rate value, vco_set_rate does not get called assuming VCO is already set to required value. But Due to GDSC toggle, VCO values are erased in the HW. To make sure VCO is programmed correctly, we forcefully call set_rate from vco_prepare. Signed-off-by: Harigovindan P Reviewed-by: Jeffrey Hugo Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm/msm/dsi: save pll state before dsi host is powered off

2020-03-11T13:14:51+00:00

[ Upstream commit a1028dcfd0dd97884072288d0c8ed7f30399b528 ] Save pll state before dsi host is powered off. Without this change some register values gets resetted. Signed-off-by: Harigovindan P Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm: msm: Fix return type of dsi_mgr_connector_mode_valid for kCFI

2020-03-11T13:14:50+00:00

[ Upstream commit 7fd2dfc3694922eb7ace4801b7208cf9f62ebc7d ] I was hitting kCFI crashes when building with clang, and after some digging finally narrowed it down to the dsi_mgr_connector_mode_valid() function being implemented as returning an int, instead of an enum drm_mode_status. This patch fixes it, and appeases the opaque word of the kCFI gods (seriously, clang inlining everything makes the kCFI backtraces only really rough estimates of where things went wrong). Thanks as always to Sami for his help narrowing this down. Cc: Rob Clark Cc: Sean Paul Cc: Sami Tolvanen Cc: Todd Kjos Cc: Alistair Delva Cc: Amit Pundir Cc: Sumit Semwal Cc: freedreno@lists.freedesktop.org Cc: clang-built-linux@googlegroups.com Signed-off-by: John Stultz Reviewed-by: Nick Desaulniers Tested-by: Amit Pundir Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm/msm/mdp5: rate limit pp done timeout warnings

2020-03-11T13:14:49+00:00

[ Upstream commit ef8c9809acb0805c991bba8bdd4749fc46d44a98 ] Add rate limiting of the 'pp done time out' warnings since these warnings can quickly fill the dmesg buffer. Signed-off-by: Brian Masney Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm/i915/gvt: Separate display reset from ALL_ENGINES reset

2020-03-05T15:42:19+00:00

commit 3eb55e6f753a379e293395de8d5f3be28351a7f8 upstream. ALL_ENGINES reset doesn't clobber display with the current gvt-g supported platforms. Thus ALL_ENGINES reset shouldn't reset the display engine registers emulated by gvt-g. This fixes guest warning like [ 14.622026] [drm] Initialized i915 1.6.0 20200114 for 0000:00:03.0 on minor 0 [ 14.967917] fbcon: i915drmfb (fb0) is primary device [ 25.100188] [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] E RROR [CRTC:51:pipe A] flip_done timed out [ 25.100860] -----------[ cut here ]----------- [ 25.100861] pll on state mismatch (expected 0, found 1) [ 25.101024] WARNING: CPU: 1 PID: 30 at drivers/gpu/drm/i915/display/intel_dis play.c:14382 verify_single_dpll_state.isra.115+0x28f/0x320 [i915] [ 25.101025] Modules linked in: intel_rapl_msr intel_rapl_common kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel i915 aesni_intel cr ypto_simd cryptd glue_helper cec rc_core video drm_kms_helper joydev drm input_l eds i2c_algo_bit serio_raw fb_sys_fops syscopyarea sysfillrect sysimgblt mac_hid qemu_fw_cfg sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4 e1000 psmouse i2c_piix4 pata_acpi floppy [ 25.101052] CPU: 1 PID: 30 Comm: kworker/u4:1 Not tainted 5.5.0+ #1 [ 25.101053] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1 .12.1-0-ga5cab58 04/01/2014 [ 25.101055] Workqueue: events_unbound async_run_entry_fn [ 25.101092] RIP: 0010:verify_single_dpll_state.isra.115+0x28f/0x320 [i915] [ 25.101093] Code: e0 d9 ff e9 a3 fe ff ff 80 3d e9 c2 11 00 00 44 89 f6 48 c7 c7 c0 9d 88 c0 75 3b e8 eb df d9 ff e9 c7 fe ff ff e8 d1 e0 ae c4 <0f> 0b e9 7a fe ff ff 80 3d c0 c2 11 00 00 8d 71 41 89 c2 48 c7 c7 [ 25.101093] RSP: 0018:ffffb1de80107878 EFLAGS: 00010286 [ 25.101094] RAX: 0000000000000000 RBX: ffffb1de80107884 RCX: 0000000000000007 [ 25.101095] RDX: 0000000000000000 RSI: 0000000000000002 RDI: ffff94fdfdd19740 [ 25.101095] RBP: ffffb1de80107938 R08: 0000000d6bfdc7b4 R09: 000000000000002b [ 25.101096] R10: ffff94fdf82dc000 R11: 0000000000000225 R12: 00000000000001f8 [ 25.101096] R13: ffff94fdb3ca6a90 R14: ffff94fdb3ca0000 R15: 0000000000000000 [ 25.101097] FS: 0000000000000000(0000) GS:ffff94fdfdd00000(0000) knlGS:00000 00000000000 [ 25.101098] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 25.101098] CR2: 00007fbc3e2be9c8 CR3: 000000003339a003 CR4: 0000000000360ee0 [ 25.101101] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 25.101101] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 25.101102] Call Trace: [ 25.101139] intel_atomic_commit_tail+0xde4/0x1520 [i915] [ 25.101141] ? flush_workqueue_prep_pwqs+0xfa/0x130 [ 25.101142] ? flush_workqueue+0x198/0x3c0 [ 25.101174] intel_atomic_commit+0x2ad/0x320 [i915] [ 25.101209] drm_atomic_commit+0x4a/0x50 [drm] [ 25.101220] drm_client_modeset_commit_atomic+0x1c4/0x200 [drm] [ 25.101231] drm_client_modeset_commit_force+0x47/0x170 [drm] [ 25.101250] drm_fb_helper_restore_fbdev_mode_unlocked+0x4e/0xa0 [drm_kms_hel per] [ 25.101255] drm_fb_helper_set_par+0x2d/0x60 [drm_kms_helper] [ 25.101287] intel_fbdev_set_par+0x1a/0x40 [i915] [ 25.101289] ? con_is_visible+0x2e/0x60 [ 25.101290] fbcon_init+0x378/0x600 [ 25.101292] visual_init+0xd5/0x130 [ 25.101296] do_bind_con_driver+0x217/0x430 [ 25.101297] do_take_over_console+0x7d/0x1b0 [ 25.101298] do_fbcon_takeover+0x5c/0xb0 [ 25.101299] fbcon_fb_registered+0x199/0x1a0 [ 25.101301] register_framebuffer+0x22c/0x330 [ 25.101306] __drm_fb_helper_initial_config_and_unlock+0x31a/0x520 [drm_kms_h elper] [ 25.101311] drm_fb_helper_initial_config+0x35/0x40 [drm_kms_helper] [ 25.101341] intel_fbdev_initial_config+0x18/0x30 [i915] [ 25.101342] async_run_entry_fn+0x3c/0x150 [ 25.101343] process_one_work+0x1fd/0x3f0 [ 25.101344] worker_thread+0x34/0x410 [ 25.101346] kthread+0x121/0x140 [ 25.101346] ? process_one_work+0x3f0/0x3f0 [ 25.101347] ? kthread_park+0x90/0x90 [ 25.101350] ret_from_fork+0x35/0x40 [ 25.101351] --[ end trace b5b47d44cd998ba1 ]-- Fixes: 6294b61ba769 ("drm/i915/gvt: add missing display part reset for vGPU reset") Signed-off-by: Tina Zhang Reviewed-by: Zhenyu Wang Signed-off-by: Zhenyu Wang Link: http://patchwork.freedesktop.org/patch/msgid/20200221023234.28635-1-tina.zhang@intel.com Signed-off-by: Greg Kroah-Hartman

drm/i915/gvt: Fix orphan vgpu dmabuf_objs' lifetime

2020-03-05T15:42:19+00:00

commit b549c252b1292aea959cd9b83537fcb9384a6112 upstream. Deleting dmabuf item's list head after releasing its container can lead to KASAN-reported issue: BUG: KASAN: use-after-free in __list_del_entry_valid+0x15/0xf0 Read of size 8 at addr ffff88818a4598a8 by task kworker/u8:3/13119 So fix this issue by puting deleting dmabuf_objs ahead of releasing its container. Fixes: dfb6ae4e14bd6 ("drm/i915/gvt: Handle orphan dmabuf_objs") Signed-off-by: Tina Zhang Reviewed-by: Zhenyu Wang Signed-off-by: Zhenyu Wang Link: http://patchwork.freedesktop.org/patch/msgid/20200225053527.8336-2-tina.zhang@intel.com Signed-off-by: Greg Kroah-Hartman