kernel/linux.git/drivers/gpu, branch v3.16.76

drm/gma500/cdv: Check vbt config bits when detecting lvds panels

2019-10-05T15:19:39+00:00

commit 7c420636860a719049fae9403e2c87804f53bdde upstream. Some machines have an lvds child device in vbt even though a panel is not attached. To make detection more reliable we now also check the lvds config bits available in the vbt. Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1665766 Reviewed-by: Hans de Goede Signed-off-by: Patrik Jakobsson Link: https://patchwork.freedesktop.org/patch/msgid/20190416114607.1072-1-patrik.r.jakobsson@gmail.com Signed-off-by: Ben Hutchings

drm/radeon: prefer lower reference dividers

2019-09-23T20:12:04+00:00

commit 2e26ccb119bde03584be53406bbd22e711b0d6e6 upstream. Instead of the closest reference divider prefer the lowest, this fixes flickering issues on HP Compaq nx9420. Bugs: https://bugs.freedesktop.org/show_bug.cgi?id=108514 Suggested-by: Paul Dufresne Signed-off-by: Christian König Acked-by: Alex Deucher Signed-off-by: Alex Deucher [bwh: Backported to 3.16: adjust context] Signed-off-by: Ben Hutchings

drm/fb-helper: dpms_legacy(): Only set on connectors in use

2019-09-23T20:11:37+00:00

commit 65a102f68005891d7f39354cfd79099908df6d51 upstream. For each enabled crtc the functions sets dpms on all registered connectors. Limit this to only doing it once and on the connectors actually in use. Signed-off-by: Noralf Trønnes Fixes: 023eb571a1d0 ("drm: correctly update connector DPMS status in drm_fb_helper") Reviewed-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20190326175546.18126-3-noralf@tronnes.org [bwh: Backported to 3.16: adjust context] Signed-off-by: Ben Hutchings

drm/radeon/evergreen_cs: fix missing break in switch statement

2019-07-09T21:04:03+00:00

commit cc5034a5d293dd620484d1d836aa16c6764a1c8c upstream. Add missing break statement in order to prevent the code from falling through to case CB_TARGET_MASK. This bug was found thanks to the ongoing efforts to enable -Wimplicit-fallthrough. Fixes: dd220a00e8bd ("drm/radeon/kms: add support for streamout v7") Signed-off-by: Gustavo A. R. Silva Signed-off-by: Alex Deucher Signed-off-by: Ben Hutchings

drm: Fix error handling in drm_legacy_addctx

2019-07-09T21:03:44+00:00

commit c39191feed4540fed98badeb484833dcf659bb96 upstream. 'ctx->handle' is unsigned, it never less than zero. This patch use int 'tmp_handle' to handle the err condition. Fixes: 62968144e673 ("drm: convert drm context code to use Linux idr") Signed-off-by: YueHaibing Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20181229024907.12852-1-yuehaibing@huawei.com [bwh: Backported to 3.16: We only have the "legacy" driver type here] Signed-off-by: Ben Hutchings

drm/vmwgfx: Fix setting of dma masks

2019-05-02T20:41:39+00:00

commit 4cbfa1e6c09e98450aab3240e5119b0ab2c9795b upstream. Previously we set only the dma mask and not the coherent mask. Fix that. Also, for clarity, make sure both are initially set to 64 bits. Fixes: 0d00c488f3de: ("drm/vmwgfx: Fix the driver for large dma addresses") Signed-off-by: Thomas Hellstrom Reviewed-by: Deepak Rawat Signed-off-by: Ben Hutchings

drm/vmwgfx: Return error code from vmw_execbuf_copy_fence_user

2019-05-02T20:41:39+00:00

commit 728354c005c36eaf44b6e5552372b67e60d17f56 upstream. The function was unconditionally returning 0, and a caller would have to rely on the returned fence pointer being NULL to detect errors. However, the function vmw_execbuf_copy_fence_user() would expect a non-zero error code in that case and would BUG otherwise. So make sure we return a proper non-zero error code if the fence pointer returned is NULL. Fixes: ae2a104058e2: ("vmwgfx: Implement fence objects") Signed-off-by: Thomas Hellstrom Reviewed-by: Deepak Rawat Signed-off-by: Ben Hutchings

drm/modes: Prevent division by zero htotal

2019-05-02T20:41:28+00:00

commit a2fcd5c84f7a7825e028381b10182439067aa90d upstream. This patch prevents division by zero htotal. In a follow-up mail Tina writes: > > How did you manage to get here with htotal == 0? This needs backtraces (or if > > this is just about static checkers, a mention of that). > > -Daniel > > In GVT-g, we are trying to enable a virtual display w/o setting timings for a pipe > (a.k.a htotal=0), then we met the following kernel panic: > > [ 32.832048] divide error: 0000 [#1] SMP PTI > [ 32.833614] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.18.0-rc4-sriov+ #33 > [ 32.834438] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.10.1-0-g8891697-dirty-20180511_165818-tinazhang-linux-1 04/01/2014 > [ 32.835901] RIP: 0010:drm_mode_hsync+0x1e/0x40 > [ 32.836004] Code: 31 c0 c3 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 8b 87 d8 00 00 00 85 c0 75 22 8b 4f 68 85 c9 78 1b 69 47 58 e8 03 00 00 99 f9 b9 d3 4d 62 10 05 f4 01 00 00 f7 e1 89 d0 c1 e8 06 f3 c3 66 > [ 32.836004] RSP: 0000:ffffc900000ebb90 EFLAGS: 00010206 > [ 32.836004] RAX: 0000000000000000 RBX: ffff88001c67c8a0 RCX: 0000000000000000 > [ 32.836004] RDX: 0000000000000000 RSI: ffff88001c67c000 RDI: ffff88001c67c8a0 > [ 32.836004] RBP: ffff88001c7d03a0 R08: ffff88001c67c8a0 R09: ffff88001c7d0330 > [ 32.836004] R10: ffffffff822c3a98 R11: 0000000000000001 R12: ffff88001c67c000 > [ 32.836004] R13: ffff88001c7d0370 R14: ffffffff8207eb78 R15: ffff88001c67c800 > [ 32.836004] FS: 0000000000000000(0000) GS:ffff88001da00000(0000) knlGS:0000000000000000 > [ 32.836004] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > [ 32.836004] CR2: 0000000000000000 CR3: 000000000220a000 CR4: 00000000000006f0 > [ 32.836004] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > [ 32.836004] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 > [ 32.836004] Call Trace: > [ 32.836004] intel_mode_from_pipe_config+0x72/0x90 > [ 32.836004] intel_modeset_setup_hw_state+0x569/0xf90 > [ 32.836004] intel_modeset_init+0x905/0x1db0 > [ 32.836004] i915_driver_load+0xb8c/0x1120 > [ 32.836004] i915_pci_probe+0x4d/0xb0 > [ 32.836004] local_pci_probe+0x44/0xa0 > [ 32.836004] ? pci_assign_irq+0x27/0x130 > [ 32.836004] pci_device_probe+0x102/0x1c0 > [ 32.836004] driver_probe_device+0x2b8/0x480 > [ 32.836004] __driver_attach+0x109/0x110 > [ 32.836004] ? driver_probe_device+0x480/0x480 > [ 32.836004] bus_for_each_dev+0x67/0xc0 > [ 32.836004] ? klist_add_tail+0x3b/0x70 > [ 32.836004] bus_add_driver+0x1e8/0x260 > [ 32.836004] driver_register+0x5b/0xe0 > [ 32.836004] ? mipi_dsi_bus_init+0x11/0x11 > [ 32.836004] do_one_initcall+0x4d/0x1eb > [ 32.836004] kernel_init_freeable+0x197/0x237 > [ 32.836004] ? rest_init+0xd0/0xd0 > [ 32.836004] kernel_init+0xa/0x110 > [ 32.836004] ret_from_fork+0x35/0x40 > [ 32.836004] Modules linked in: > [ 32.859183] ---[ end trace 525608b0ed0e8665 ]--- > [ 32.859722] RIP: 0010:drm_mode_hsync+0x1e/0x40 > [ 32.860287] Code: 31 c0 c3 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 8b 87 d8 00 00 00 85 c0 75 22 8b 4f 68 85 c9 78 1b 69 47 58 e8 03 00 00 99 f9 b9 d3 4d 62 10 05 f4 01 00 00 f7 e1 89 d0 c1 e8 06 f3 c3 66 > [ 32.862680] RSP: 0000:ffffc900000ebb90 EFLAGS: 00010206 > [ 32.863309] RAX: 0000000000000000 RBX: ffff88001c67c8a0 RCX: 0000000000000000 > [ 32.864182] RDX: 0000000000000000 RSI: ffff88001c67c000 RDI: ffff88001c67c8a0 > [ 32.865206] RBP: ffff88001c7d03a0 R08: ffff88001c67c8a0 R09: ffff88001c7d0330 > [ 32.866359] R10: ffffffff822c3a98 R11: 0000000000000001 R12: ffff88001c67c000 > [ 32.867213] R13: ffff88001c7d0370 R14: ffffffff8207eb78 R15: ffff88001c67c800 > [ 32.868075] FS: 0000000000000000(0000) GS:ffff88001da00000(0000) knlGS:0000000000000000 > [ 32.868983] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > [ 32.869659] CR2: 0000000000000000 CR3: 000000000220a000 CR4: 00000000000006f0 > [ 32.870599] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > [ 32.871598] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 > [ 32.872549] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b > > Since drm_mode_hsync() has the logic to check mode->htotal, I just extend it to cover the case htotal==0. Signed-off-by: Tina Zhang Cc: Adam Jackson Cc: Dave Airlie Cc: Daniel Vetter [danvet: Add additional explanations + cc: stable.] Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/1548228539-3061-1-git-send-email-tina.zhang@intel.com Signed-off-by: Ben Hutchings

drm/fb-helper: Ignore the value of fb_var_screeninfo.pixclock

2019-05-02T20:41:17+00:00

commit 66a8d5bfb518f9f12d47e1d2dce1732279f9451e upstream. Strict requirement of pixclock to be zero breaks support of SDL 1.2 which contains hardcoded table of supported video modes with non-zero pixclock values[1]. To better understand which pixclock values are considered valid and how driver should handle these values, I briefly examined few existing fbdev drivers and documentation in Documentation/fb/. And it looks like there are no strict rules on that and actual behaviour varies: * some drivers treat (pixclock == 0) as "use defaults" (uvesafb.c); * some treat (pixclock == 0) as invalid value which leads to -EINVAL (clps711x-fb.c); * some pass converted pixclock value to hardware (uvesafb.c); * some are trying to find nearest value from predefined table (vga16fb.c, video_gx.c). Given this, I believe that it should be safe to just ignore this value if changing is not supported. It seems that any portable fbdev application which was not written only for one specific device working under one specific kernel version should not rely on any particular behaviour of pixclock anyway. However, while enabling SDL1 applications to work out of the box when there is no /etc/fb.modes with valid settings, this change affects the video mode choosing logic in SDL. Depending on current screen resolution, contents of /etc/fb.modes and resolution requested by application, this may lead to user-visible difference (not always): image will be displayed in a right way, but it will be aligned to the left instead of center. There is no "right behaviour" here as well, as emulated fbdev, opposing to old fbdev drivers, simply ignores any requsts of video mode changes with resolutions smaller than current. The easiest way to reproduce this problem is to install sdl-sopwith[2], remove /etc/fb.modes file if it exists, and then try to run sopwith from console without X. At least in Fedora 29, sopwith may be simply installed from standard repositories. [1] SDL 1.2.15 source code, src/video/fbcon/SDL_fbvideo.c, vesa_timings [2] http://sdl-sopwith.sourceforge.net/ Signed-off-by: Ivan Mironov Fixes: 79e539453b34e ("DRM: i915: add mode setting support") Fixes: 771fe6b912fca ("drm/radeon: introduce kernel modesetting for radeon hardware") Fixes: 785b93ef8c309 ("drm/kms: move driver specific fb common code to helper functions (v2)") Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20190108072353.28078-3-mironov.ivan@gmail.com [bwh: Backported to 3.16: adjust context] Signed-off-by: Ben Hutchings

drm/fb-helper: Partially bring back workaround for bugs of SDL 1.2

2019-05-02T20:41:16+00:00

commit 62d85b3bf9d978ed4b6b2aeef5cf0ccf1423906e upstream. SDL 1.2 sets all fields related to the pixel format to zero in some cases[1]. Prior to commit db05c48197759 ("drm: fb-helper: Reject all pixel format changing requests"), there was an unintentional workaround for this that existed for more than a decade. First in device-specific DRM drivers, then here in drm_fb_helper.c. Previous code containing this workaround just ignores pixel format fields from userspace code. Not a good thing either, as this way, driver may silently use pixel format different from what client actually requested, and this in turn will lead to displaying garbage on the screen. I think that returning EINVAL to userspace in this particular case is the right option, so I decided to left code from problematic commit untouched instead of just reverting it entirely. Here is the steps required to reproduce this problem exactly: 1) Compile fceux[2] with SDL 1.2.15 and without GTK or OpenGL support. SDL should be compiled with fbdev support (which is on by default). 2) Create /etc/fb.modes with following contents (values seems not used, and just required to trigger problematic code in SDL): mode "test" geometry 1 1 1 1 1 timings 1 1 1 1 1 1 1 endmode 3) Create ~/.fceux/fceux.cfg with following contents: SDL.Hotkeys.Quit = 27 SDL.DoubleBuffering = 1 4) Ensure that screen resolution is at least 1280x960 (e.g. append "video=Virtual-1:1280x960-32" to the kernel cmdline for qemu/QXL). 5) Try to run fceux on VT with some ROM file[3]: # ./fceux color_test.nes [1] SDL 1.2.15 source code, src/video/fbcon/SDL_fbvideo.c, FB_SetVideoMode() [2] http://www.fceux.com [3] Example ROM: https://github.com/bokuweb/rustynes/blob/master/roms/color_test.nes Reported-by: saahriktu Suggested-by: saahriktu Fixes: db05c48197759 ("drm: fb-helper: Reject all pixel format changing requests") Signed-off-by: Ivan Mironov [danvet: Delete misleading comment.] Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20190108072353.28078-2-mironov.ivan@gmail.com Link: https://patchwork.freedesktop.org/patch/msgid/20190108072353.28078-2-mironov.ivan@gmail.com [bwh: Backported to 3.16: - Use fb->depth instead of fb->format->depth - Adjust context] Signed-off-by: Ben Hutchings