kernel/linux.git/drivers/gpu/vga, branch v4.16.17

vfs: do bulk POLL* -> EPOLL* replacement

2018-02-11T22:34:03+00:00

This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^$[^\"]*$$\$/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro Signed-off-by: Linus Torvalds

the rest of drivers/*: annotate ->poll() instances

2017-11-28T16:06:58+00:00

Signed-off-by: Al Viro

vgaarb: Factor out EFI and fallback default device selection

2017-10-18T08:04:56+00:00

The default VGA device is normally set in vga_arbiter_add_pci_device() when we call it for the first enabled device that can be accessed with the legacy VGA resources ([mem 0xa0000-0xbffff], etc.) That default device can be overridden by an EFI device that owns the boot framebuffer. As a fallback, we can also select a VGA device that can't be accessed via legacy VGA resources, or a VGA device that isn't even enabled. Factor out this EFI and fallback selection from vga_arb_device_init() into a separate vga_arb_select_default_device() function. This doesn't change any behavior, but it untangles the "bridge control possible" checking and messages from the default device selection. Tested-by: Zhou Wang # D05 Hisi Hip07, Hip08 Signed-off-by: Bjorn Helgaas Acked-by: Ard Biesheuvel Reviewed-by: Daniel Axtens Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20171013034729.14630.30419.stgit@bhelgaas-glaptop.roam.corp.google.com

vgaarb: Select a default VGA device even if there's no legacy VGA

2017-10-18T08:04:56+00:00

Daniel Axtens reported that on the HiSilicon D05 board, the VGA device is behind a bridge that doesn't support PCI_BRIDGE_CTL_VGA, so the VGA arbiter never selects it as the default, which means Xorg auto-detection doesn't work. VGA is a legacy PCI feature: a VGA device can respond to addresses, e.g., [mem 0xa0000-0xbffff], [io 0x3b0-0x3bb], [io 0x3c0-0x3df], etc., that are not configurable by BARs. Consequently, multiple VGA devices can conflict with each other. The VGA arbiter avoids conflicts by ensuring that those legacy resources are only routed to one VGA device at a time. The arbiter identifies the "default VGA" device, i.e., a legacy VGA device that was used by boot firmware. It selects the first device that: - is of PCI_CLASS_DISPLAY_VGA, - has both PCI_COMMAND_IO and PCI_COMMAND_MEMORY enabled, and - has PCI_BRIDGE_CTL_VGA set in all upstream bridges. Some systems don't have such a device. For example, if a host bridge doesn't support I/O space, PCI_COMMAND_IO probably won't be enabled for any devices below it. Or, as on the HiSilicon D05, the VGA device may be behind a bridge that doesn't support PCI_BRIDGE_CTL_VGA, so accesses to the legacy VGA resources will never reach the device. This patch extends the arbiter so that if it doesn't find a device that meets all the above criteria, it selects the first device that: - is of PCI_CLASS_DISPLAY_VGA and - has PCI_COMMAND_IO or PCI_COMMAND_MEMORY enabled If it doesn't find even that, it selects the first device that: - is of class PCI_CLASS_DISPLAY_VGA. Such a device may not be able to use the legacy VGA resources, but most drivers can operate the device without those. Setting it as the default device means its "boot_vga" sysfs file will contain "1", which Xorg (via libpciaccess) uses to help select its default output device. This fixes Xorg auto-detection on some arm64 systems (HiSilicon D05 in particular; see the link below). It also replaces the powerpc fixup_vga() quirk, albeit with slightly different semantics: the quirk selected the first VGA device we found, and overrode that selection with any enabled VGA device we found. If there were several enabled VGA devices, the *last* one we found would become the default. The code here instead selects the *first* enabled VGA device we find, and if none are enabled, the first VGA device we find. Link: http://lkml.kernel.org/r/20170901072744.2409-1-dja@axtens.net Tested-by: Daniel Axtens # arm64, ppc64-qemu-tcg Tested-by: Zhou Wang # D05 Hisi Hip07, Hip08 Signed-off-by: Bjorn Helgaas Acked-by: Ard Biesheuvel Reviewed-by: Daniel Axtens Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20171013034721.14630.65913.stgit@bhelgaas-glaptop.roam.corp.google.com

sched/wait: Rename wait_queue_t => wait_queue_entry_t

2017-06-20T10:18:27+00:00

Rename: wait_queue_t => wait_queue_entry_t 'wait_queue_t' was always a slight misnomer: its name implies that it's a "queue", but in reality it's a queue *entry*. The 'real' queue is the wait queue head, which had to carry the name. Start sorting this out by renaming it to 'wait_queue_entry_t'. This also allows the real structure name 'struct __wait_queue' to lose its double underscore and become 'struct wait_queue_entry', which is the more canonical nomenclature for such data types. Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar

Merge tag 'drm-misc-next-2017-03-06' of git://anongit.freedesktop.org/git/drm-misc into drm-next

2017-03-07T03:59:53+00:00

First slice of drm-misc-next for 4.12: Core/subsystem-wide: - link status core patch from Manasi, for signalling link train fail to userspace. I also had the i915 patch in here, but that had a small buglet in our CI, so reverted. - more debugfs_remove removal from Noralf, almost there now (Noralf said he'll try to follow up with the stragglers). - drm todo moved into kerneldoc, for better visibility (see Documentation/gpu/todo.rst), lots of starter tasks in there. - devm_ of helpers + use it in sti (from Ben Gaignard, acked by Rob Herring) - extended framebuffer fbdev support (for fbdev flipping), and vblank wait ioctl fbdev support (Maxime Ripard) - misc small things all over, as usual - add vblank callbacks to drm_crtc_funcs, plus make lots of good use of this to simplify drivers (Shawn Guo) - new atomic iterator macros to unconfuse old vs. new state Small drivers: - vc4 improvements from Eric - vc4 kerneldocs (Eric)! - tons of improvements for dw-mipi-dsi in rockchip from John Keeping and Chris Zhong. - MAINTAINERS entries for drivers managed in drm-misc. It's not yet official, still an experiment, but definitely not complete fail and better to avoid confusion. We kinda screwed that up with drm-misc a bit when we started committers last year. - qxl atomic conversion (Gabriel Krisman) - bunch of virtual driver polish (qxl, virgl, ...) - misc tiny patches all over This is the first time we've done the same merge-window blackout for drm-misc as we've done for drm-intel for ages, hence why we have a _lot_ of stuff queued already. But it's still only half of drm-intel (room to grow!), and the drivers in drm-misc experiment seems to work at least insofar as that you also get lots of driver updates here alredy. * tag 'drm-misc-next-2017-03-06' of git://anongit.freedesktop.org/git/drm-misc: (141 commits) drm/vc4: Fix OOPSes from trying to cache a partially constructed BO. drm/vc4: Fulfill user BO creation requests from the kernel BO cache. Revert "drm/i915: Implement Link Rate fallback on Link training failure" drm/fb-helper: implement ioctl FBIO_WAITFORVSYNC drm: Update drm_fbdev_cma_init documentation drm/rockchip/dsi: add dw-mipi power domain support drm/rockchip/dsi: fix insufficient bandwidth of some panel dt-bindings: add power domain node for dw-mipi-rockchip drm/rockchip/dsi: remove mode_valid function drm/rockchip/dsi: dw-mipi: correct the coding style drm/rockchip/dsi: dw-mipi: support RK3399 mipi dsi dt-bindings: add rk3399 support for dw-mipi-rockchip drm/rockchip: dw-mipi-dsi: add reset control drm/rockchip: dw-mipi-dsi: support non-burst modes drm/rockchip: dw-mipi-dsi: defer probe if panel is not loaded drm/rockchip: vop: test for P{H,V}SYNC drm/rockchip: dw-mipi-dsi: use positive check for N{H, V}SYNC drm/rockchip: dw-mipi-dsi: use specific poll helper drm/rockchip: dw-mipi-dsi: improve PLL configuration drm/rockchip: dw-mipi-dsi: properly configure PHY timing ...

sched/headers: Prepare to move signal wakeup & sigpending methods from into

2017-03-02T07:42:32+00:00

Fix up affected files that include this signal functionality via sched.h. Acked-by: Linus Torvalds Cc: Mike Galbraith Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar

drivers:gpu: vga :vga_switcheroo.c : Fixed some coding style issues

2017-03-01T08:45:28+00:00

Fixed the following style issues drivers/gpu/vga/vga_switcheroo.c:98: WARNING: please, no space before tabs drivers/gpu/vga/vga_switcheroo.c:99: WARNING: please, no space before tabs drivers/gpu/vga/vga_switcheroo.c:102: WARNING: please, no space before tabs drivers/gpu/vga/vga_switcheroo.c:103: WARNING: please, no space before tabs drivers/gpu/vga/vga_switcheroo.c:129: WARNING: please, no space before tabs drivers/gpu/vga/vga_switcheroo.c:135: WARNING: please, no space before tabs drivers/gpu/vga/vga_switcheroo.c:217: WARNING: line over 80 characters drivers/gpu/vga/vga_switcheroo.c:218: WARNING: line over 80 characters drivers/gpu/vga/vga_switcheroo.c:308: WARNING: please, no space before tabs drivers/gpu/vga/vga_switcheroo.c:340: WARNING: line over 80 characters drivers/gpu/vga/vga_switcheroo.c:1087: WARNING: Block comments use * on subsequent lines drivers/gpu/vga/vga_switcheroo.c:1087: WARNING: Block comments use a trailing */ on a separate line Signed-off-by: Joan Jani Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/HE1PR1001MB1148F38207BC31C860FAF06DC9560@HE1PR1001MB1148.EURPRD10.PROD.OUTLOOK.COM

vgaarb: use valid dev pointer in vgaarb_info()

2016-11-22T15:40:35+00:00

We now pass the device to the debug messages, but on non-x86, this is an invalid pointer in vga_arb_device_init: drivers/gpu/vga/vgaarb.c: In function 'vga_arb_device_init': drivers/gpu/vga/vgaarb.c:1467:4: error: 'dev' may be used uninitialized in this function [-Werror=maybe-uninitialized] This moves the initialization of the dev pointer outside of the architecture #ifdef. Fixes: a75d68f62106 ("vgaarb: Use dev_printk() when possible") Signed-off-by: Arnd Bergmann Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/20161122143445.1896558-1-arnd@arndb.de

vgaarb: Downgrade userspace-triggerable messages to debug

2016-11-18T15:29:52+00:00

To avoid userspace-triggerable dmesg spam, downgrade messages in the sysfs write parsing code to debug level. Signed-off-by: Bjorn Helgaas Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/20161118141158.32415.71438.stgit@bhelgaas-glaptop.roam.corp.google.com