kernel/linux.git/drivers/gpu/ipu-v3, branch v4.19.67

gpu: ipu-v3: ipu-ic: Fix saturation bit offset in TPMEM

2019-07-26T07:14:29+00:00

commit 3d1f62c686acdedf5ed9642b763f3808d6a47d1e upstream. The saturation bit was being set at bit 9 in the second 32-bit word of the TPMEM CSC. This isn't correct, the saturation bit is bit 42, which is bit 10 of the second word. Fixes: 1aa8ea0d2bd5d ("gpu: ipu-v3: Add Image Converter unit") Signed-off-by: Steve Longerbeam Reviewed-by: Philipp Zabel Cc: stable@vger.kernel.org Signed-off-by: Philipp Zabel Signed-off-by: Greg Kroah-Hartman

gpu: ipu-v3: dp: fix CSC handling

2019-05-16T17:41:24+00:00

[ Upstream commit d4fad0a426c6e26f48c9a7cdd21a7fe9c198d645 ] Initialize the flow input colorspaces to unknown and reset to that value when the channel gets disabled. This avoids the state getting mixed up with a previous mode. Also keep the CSC settings for the background flow intact when disabling the foreground flow. Root-caused-by: Jonathan Marek Signed-off-by: Lucas Stach Signed-off-by: Philipp Zabel Signed-off-by: Sasha Levin

gpu: ipu-v3: Fix CSI offsets for imx53

2019-03-23T19:09:41+00:00

[ Upstream commit bb867d219fda7fbaabea3314702474c4eac2b91d ] The CSI offsets are wrong for both CSI0 and CSI1. They are at physical address 0x1e030000 and 0x1e038000 respectively. Fixes: 2ffd48f2e7 ("gpu: ipu-v3: Add Camera Sensor Interface unit") Signed-off-by: Steve Longerbeam Signed-off-by: Philipp Zabel Signed-off-by: Sasha Levin

gpu: ipu-v3: Fix i.MX51 CSI control registers offset

2019-03-23T19:09:41+00:00

[ Upstream commit 2c0408dd0d8906b26fe8023889af7adf5e68b2c2 ] The CSI0/CSI1 registers offset is at +0xe030000/+0xe038000 relative to the control module registers on IPUv3EX. This patch fixes wrong values for i.MX51 CSI0/CSI1. Fixes: 2ffd48f2e7 ("gpu: ipu-v3: Add Camera Sensor Interface unit") Signed-off-by: Alexander Shiyan Signed-off-by: Philipp Zabel Signed-off-by: Sasha Levin

gpu: ipu-v3: image-convert: Prevent race between run and unprepare

2019-02-12T18:46:57+00:00

[ Upstream commit 819bec35c8c9706185498c9222bd244e0781ad35 ] Prevent possible race by parallel threads between ipu_image_convert_run() and ipu_image_convert_unprepare(). This involves setting ctx->aborting to true unconditionally so that no new job runs can be queued during unprepare, and holding the ctx->aborting flag until the context is freed. Note that the "normal" ipu_image_convert_abort() case (e.g. not during context unprepare) should clear the ctx->aborting flag after aborting any active run and clearing the context's pending queue. This is because it should be possible to continue to use the conversion context and queue more runs after an abort. Signed-off-by: Steve Longerbeam Tested-by: Philipp Zabel Signed-off-by: Philipp Zabel Signed-off-by: Sasha Levin

Merge tag 'drm-next-2018-08-15' of git://anongit.freedesktop.org/drm/drm

2018-08-16T00:39:07+00:00

Pull drm updates from Dave Airlie: "This is the main drm pull request for 4.19. Rob has some new hardware support for new qualcomm hw that I'll send along separately. This has the display part of it, the remaining pull is for the acceleration engine. This also contains a wound-wait/wait-die mutex rework, Peter has acked it for merging via my tree. Otherwise mostly the usual level of activity. Summary: core: - Wound-wait/wait-die mutex rework - Add writeback connector type - Add "content type" property for HDMI - Move GEM bo to drm_framebuffer - Initial gpu scheduler documentation - GPU scheduler fixes for dying processes - Console deferred fbcon takeover support - Displayport support for CEC tunneling over AUX panel: - otm8009a panel driver fixes - Innolux TV123WAM and G070Y2-L01 panel driver - Ilitek ILI9881c panel driver - Rocktech RK070ER9427 LCD - EDT ETM0700G0EDH6 and EDT ETM0700G0BDH6 - DLC DLC0700YZG-1 - BOE HV070WSA-100 - newhaven, nhd-4.3-480272ef-atxl LCD - DataImage SCF0700C48GGU18 - Sharp LQ035Q7DB03 - p079zca: Refactor to support multiple panels tinydrm: - ILI9341 display panel New driver: - vkms - virtual kms driver to testing. i915: - Icelake: Display enablement DSI support IRQ support Powerwell support - GPU reset fixes and improvements - Full ppgtt support refactoring - PSR fixes and improvements - Execlist improvments - GuC related fixes amdgpu: - Initial amdgpu documentation - JPEG engine support on VCN - CIK uses powerplay by default - Move to using core PCIE functionality for gens/lanes - DC/Powerplay interface rework - Stutter mode support for RV - Vega12 Powerplay updates - GFXOFF fixes - GPUVM fault debugging - Vega12 GFXOFF - DC improvements - DC i2c/aux changes - UVD 7.2 fixes - Powerplay fixes for Polaris12, CZ/ST - command submission bo_list fixes amdkfd: - Raven support - Power management fixes udl: - Cleanups and fixes nouveau: - misc fixes and cleanups. msm: - DPU1 support display controller in sdm845 - GPU coredump support. vmwgfx: - Atomic modesetting validation fixes - Support for multisample surfaces armada: - Atomic modesetting support completed. exynos: - IPPv2 fixes - Move g2d to component framework - Suspend/resume support cleanups - Driver cleanups imx: - CSI configuration improvements - Driver cleanups - Use atomic suspend/resume helpers - ipu-v3 V4L2 XRGB32/XBGR32 support pl111: - Add Nomadik LCDC variant v3d: - GPU scheduler jobs management sun4i: - R40 display engine support - TCON TOP driver mediatek: - MT2712 SoC support rockchip: - vop fixes omapdrm: - Workaround for DRA7 errata i932 - Fix mm_list locking mali-dp: - Writeback implementation PM improvements - Internal error reporting debugfs tilcdc: - Single fix for deferred probing hdlcd: - Teardown fixes tda998x: - Converted to a bridge driver. etnaviv: - Misc fixes" * tag 'drm-next-2018-08-15' of git://anongit.freedesktop.org/drm/drm: (1506 commits) drm/amdgpu/sriov: give 8s for recover vram under RUNTIME drm/scheduler: fix param documentation drm/i2c: tda998x: correct PLL divider calculation drm/i2c: tda998x: get rid of private fill_modes function drm/i2c: tda998x: move mode_valid() to bridge drm/i2c: tda998x: register bridge outside of component helper drm/i2c: tda998x: cleanup from previous changes drm/i2c: tda998x: allocate tda998x_priv inside tda998x_create() drm/i2c: tda998x: convert to bridge driver drm/scheduler: fix timeout worker setup for out of order job completions drm/amd/display: display connected to dp-1 does not light up drm/amd/display: update clk for various HDMI color depths drm/amd/display: program display clock on cache match drm/amd/display: Add NULL check for enabling dp ss drm/amd/display: add vbios table check for enabling dp ss drm/amd/display: Don't share clk source between DP and HDMI drm/amd/display: Fix DP HBR2 Eye Diagram Pattern on Carrizo drm/amd/display: Use calculated disp_clk_khz value for dce110 drm/amd/display: Implement custom degamma lut on dcn drm/amd/display: Destroy aux_engines only once ...

Merge branches 'pm-core', 'pm-domains', 'pm-sleep', 'acpi-pm' and 'pm-cpuidle'

2018-08-14T07:48:10+00:00

Merge changes in the PM core, system-wide PM infrastructure, generic power domains (genpd) framework, ACPI PM infrastructure and cpuidle for 4.19. * pm-core: driver core: Add flag to autoremove device link on supplier unbind driver core: Rename flag AUTOREMOVE to AUTOREMOVE_CONSUMER * pm-domains: PM / Domains: Introduce dev_pm_domain_attach_by_name() PM / Domains: Introduce option to attach a device by name to genpd PM / Domains: dt: Add a power-domain-names property * pm-sleep: PM / reboot: Eliminate race between reboot and suspend PM / hibernate: Mark expected switch fall-through x86/power/hibernate_64: Remove VLA usage PM / hibernate: cast PAGE_SIZE to int when comparing with error code * acpi-pm: ACPI / PM: save NVS memory for ASUS 1025C laptop ACPI / PM: Default to s2idle in all machines supporting LP S0 * pm-cpuidle: ARM: cpuidle: silence error on driver registration failure

Merge tag 'imx-drm-fixes-2018-08-03' of git://git.pengutronix.de/git/pza/linux into drm-next

2018-08-10T01:37:35+00:00

drm/imx: ipu-v3 plane offset and IPU id fixes - Fix U/V plane offsets for odd vertical offsets. Due to wrong operator order, the y offset was not rounded down properly for vertically chroma subsampled planar formats. - Fix IPU id number for boards that don't have an OF alias for their single IPU in the device tree. This is necessary to support imx-media on i.MX51 and i.MX53 SoCs. Signed-off-by: Dave Airlie From: Philipp Zabel Link: https://patchwork.freedesktop.org/patch/msgid/1533552680.4204.14.camel@pengutronix.de

gpu: ipu-v3: default to id 0 on missing OF alias

2018-08-02T10:09:11+00:00

This is better than storing -ENODEV in the id number. This fixes SoCs with only one IPU that don't specify an IPU alias in the device tree. Signed-off-by: Philipp Zabel

gpu: ipu-v3: Fix U/V offset macros for planar 4:2:0

2018-08-02T09:47:39+00:00

The U and V offset macros for planar 4:2:0 (U_OFFSET, V_OFFSET, and UV_OFFSET), are not correct. The height component to the offset was calculated as: (pix->width * y / 4) But this does not produce correct offsets for odd values of y (luma line #). The luma line # must be decimated by two to produce the correct U/V line #, so the correct formula is: (pix->width * (y / 2) / 2) Signed-off-by: Steve Longerbeam Signed-off-by: Philipp Zabel