kernel/linux.git/drivers/gpu/drm, branch v4.19.148

drm/mediatek: Add missing put_device() call in mtk_hdmi_dt_parse_pdata()

2020-09-23T10:11:00+00:00

[ Upstream commit 0680a622318b8d657323b94082f4b9a44038dfee ] if of_find_device_by_node() succeed, mtk_drm_kms_init() doesn't have a corresponding put_device(). Thus add jump target to fix the exception handling for this function implementation. Fixes: 8f83f26891e1 ("drm/mediatek: Add HDMI support") Signed-off-by: Yu Kuai Signed-off-by: Chun-Kuang Hu Signed-off-by: Sasha Levin

drm/mediatek: Add exception handing in mtk_drm_probe() if component init fail

2020-09-23T10:11:00+00:00

[ Upstream commit 64c194c00789889b0f9454f583712f079ba414ee ] mtk_ddp_comp_init() is called in a loop in mtk_drm_probe(), if it fail, previous successive init component is not proccessed. Thus uninitialize valid component and put their device if component init failed. Fixes: 119f5173628a ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.") Signed-off-by: Yu Kuai Signed-off-by: Chun-Kuang Hu Signed-off-by: Sasha Levin

drm/msm: Disable preemption on all 5xx targets

2020-09-17T11:45:29+00:00

commit 7b3f3948c8b7053d771acc9f79810cc410f5e2e0 upstream. Temporarily disable preemption on a5xx targets pending some improvements to protect the RPTR shadow from being corrupted. Cc: stable@vger.kernel.org Signed-off-by: Jordan Crouse Signed-off-by: Rob Clark Signed-off-by: Greg Kroah-Hartman

drm/tve200: Stabilize enable/disable

2020-09-17T11:45:29+00:00

commit f71800228dc74711c3df43854ce7089562a3bc2d upstream. The TVE200 will occasionally print a bunch of lost interrupts and similar dmesg messages, sometimes during boot and sometimes after disabling and coming back to enablement. This is probably because the hardware is left in an unknown state by the boot loader that displays a logo. This can be fixed by bringing the controller into a known state by resetting the controller while enabling it. We retry reset 5 times like the vendor driver does. We also put the controller into reset before de-clocking it and clear all interrupts before enabling the vblank IRQ. This makes the video enable/disable/enable cycle rock solid on the D-Link DIR-685. Tested extensively. Signed-off-by: Linus Walleij Acked-by: Daniel Vetter Cc: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20200820203144.271081-1-linus.walleij@linaro.org Signed-off-by: Greg Kroah-Hartman

drm/amdgpu: Fix bug in reporting voltage for CIK

2020-09-17T11:45:26+00:00

[ Upstream commit d98299885c9ea140c1108545186593deba36c4ac ] On my R9 390, the voltage was reported as a constant 1000 mV. This was due to a bug in smu7_hwmgr.c, in the smu7_read_sensor() function, where some magic constants were used in a condition, to determine whether the voltage should be read from PLANE2_VID or PLANE1_VID. The VDDC mask was incorrectly used, instead of the VDDGFX mask. This patch changes the code to use the correct defined constants (and apply the correct bitshift), thus resulting in correct voltage reporting. Signed-off-by: Sandeep Raghuraman Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin

drm/sun4i: Fix dsi dcs long write function

2020-09-17T11:45:22+00:00

[ Upstream commit fd90e3808fd2c207560270c39b86b71af2231aa1 ] It's writing too much data. regmap_bulk_write expects number of register sized chunks to write, not a byte sized length of the bounce buffer. Bounce buffer needs to be padded too, so that regmap_bulk_write will not read past the end of the buffer. Fixes: 133add5b5ad4 ("drm/sun4i: Add Allwinner A31 MIPI-DSI controller support") Signed-off-by: Ondrej Jirman Signed-off-by: Maxime Ripard Reviewed-by: Jernej Skrabec Link: https://patchwork.freedesktop.org/patch/msgid/20200828125032.937148-1-megous@megous.com Signed-off-by: Sasha Levin

drm/msm/a6xx: fix gmu start on newer firmware

2020-09-09T17:04:23+00:00

[ Upstream commit f5749d6181fa7df5ae741788e5d96f593d3a60b6 ] New Qualcomm firmware has changed a way it reports back the 'started' event. Support new register values. Signed-off-by: Dmitry Baryshkov Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm/msm: add shutdown support for display platform_driver

2020-09-09T17:04:23+00:00

[ Upstream commit 9d5cbf5fe46e350715389d89d0c350d83289a102 ] Define shutdown callback for display drm driver, so as to disable all the CRTCS when shutdown notification is received by the driver. This change will turn off the timing engine so that no display transactions are requested while mmu translations are getting disabled during reboot sequence. Signed-off-by: Krishna Manikandan Changes in v2: - Remove NULL check from msm_pdev_shutdown (Stephen Boyd) - Change commit text to reflect when this issue was uncovered (Sai Prakash Ranjan) Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm/amd/pm: correct Vega12 swctf limit setting

2020-09-03T09:24:29+00:00

commit e0ffd340249699ad27a6c91abdfa3e89f7823941 upstream. Correct the Vega12 thermal swctf limit. Signed-off-by: Evan Quan Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

drm/amd/pm: correct Vega10 swctf limit setting

2020-09-03T09:24:29+00:00

commit b05d71b51078fc428c6b72582126d9d75d3c1f4c upstream. Correct the Vega10 thermal swctf limit. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1267 Signed-off-by: Evan Quan Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman