kernel/linux.git/drivers/gpu/drm/vc4, branch v5.16.18

drm/vc4: hdmi: Unregister codec device on unbind

2022-03-16T13:26:47+00:00

[ Upstream commit e40945ab7c7f966d0c37b7bd7b0596497dfe228d ] On bind we will register the HDMI codec device but we don't unregister it on unbind, leading to a device leakage. Unregister our device at unbind. Signed-off-by: Maxime Ripard Reviewed-by: Javier Martinez Canillas Link: https://patchwork.freedesktop.org/patch/msgid/20220127111452.222002-1-maxime@cerno.tech Signed-off-by: Sasha Levin

drm/vc4: crtc: Fix runtime_pm reference counting

2022-03-02T10:51:03+00:00

commit 6764eb690e77ecded48587d6d4e346ba2e196546 upstream. At boot on the BCM2711, if the HDMI controllers are running, the CRTC driver will disable itself and its associated HDMI controller to work around a hardware bug that would leave some pixels stuck in a FIFO. In order to avoid that issue, we need to run some operations in lockstep between the CRTC and HDMI controller, and we need to make sure the HDMI controller will be powered properly. However, since we haven't enabled it through KMS, the runtime_pm state is off at this point so we need to make sure the device is powered through pm_runtime_resume_and_get, and once the operations are complete, we call pm_runtime_put. However, the HDMI controller will do that itself in its post_crtc_powerdown, which means we'll end up calling pm_runtime_put for a single pm_runtime_get, throwing the reference counting off. Let's remove the pm_runtime_put call in the CRTC code in order to have the proper counting. Fixes: bca10db67bda ("drm/vc4: crtc: Make sure the HDMI controller is powered when disabling") Signed-off-by: Maxime Ripard Reviewed-by: Javier Martinez Canillas Link: https://patchwork.freedesktop.org/patch/msgid/20220203102003.1114673-1-maxime@cerno.tech Signed-off-by: Greg Kroah-Hartman

drm/vc4: hdmi: Allow DBLCLK modes even if horz timing is odd.

2022-02-16T11:58:30+00:00

[ Upstream commit 1d118965965f89948236ebe23072bb1fca5e7832 ] The 2711 pixel valve can't produce odd horizontal timings, and checks were added to vc4_hdmi_encoder_atomic_check and vc4_hdmi_encoder_mode_valid to filter out/block selection of such modes. Modes with DRM_MODE_FLAG_DBLCLK double all the horizontal timing values before programming them into the PV. The PV values, therefore, can not be odd, and so the modes can be supported. Amend the filtering appropriately. Fixes: 57fb32e632be ("drm/vc4: hdmi: Block odd horizontal timings") Signed-off-by: Dave Stevenson Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20220127135116.298278-1-maxime@cerno.tech Signed-off-by: Sasha Levin

drm/vc4: Fix deadlock on DSI device attach error

2022-02-16T11:58:13+00:00

[ Upstream commit 0a3d12ab5097b1d045e693412e6b366b7e82031b ] DSI device attach to DSI host will be done with host device's lock held. Un-registering host in "device attach" error path (ex: probe retry) will result in deadlock with below call trace and non operational DSI display. Startup Call trace: [ 35.043036] rt_mutex_slowlock.constprop.21+0x184/0x1b8 [ 35.043048] mutex_lock_nested+0x7c/0xc8 [ 35.043060] device_del+0x4c/0x3e8 [ 35.043075] device_unregister+0x20/0x40 [ 35.043082] mipi_dsi_remove_device_fn+0x18/0x28 [ 35.043093] device_for_each_child+0x68/0xb0 [ 35.043105] mipi_dsi_host_unregister+0x40/0x90 [ 35.043115] vc4_dsi_host_attach+0xf0/0x120 [vc4] [ 35.043199] mipi_dsi_attach+0x30/0x48 [ 35.043209] tc358762_probe+0x128/0x164 [tc358762] [ 35.043225] mipi_dsi_drv_probe+0x28/0x38 [ 35.043234] really_probe+0xc0/0x318 [ 35.043244] __driver_probe_device+0x80/0xe8 [ 35.043254] driver_probe_device+0xb8/0x118 [ 35.043263] __device_attach_driver+0x98/0xe8 [ 35.043273] bus_for_each_drv+0x84/0xd8 [ 35.043281] __device_attach+0xf0/0x150 [ 35.043290] device_initial_probe+0x1c/0x28 [ 35.043300] bus_probe_device+0xa4/0xb0 [ 35.043308] deferred_probe_work_func+0xa0/0xe0 [ 35.043318] process_one_work+0x254/0x700 [ 35.043330] worker_thread+0x4c/0x448 [ 35.043339] kthread+0x19c/0x1a8 [ 35.043348] ret_from_fork+0x10/0x20 Shutdown Call trace: [ 365.565417] Call trace: [ 365.565423] __switch_to+0x148/0x200 [ 365.565452] __schedule+0x340/0x9c8 [ 365.565467] schedule+0x48/0x110 [ 365.565479] schedule_timeout+0x3b0/0x448 [ 365.565496] wait_for_completion+0xac/0x138 [ 365.565509] __flush_work+0x218/0x4e0 [ 365.565523] flush_work+0x1c/0x28 [ 365.565536] wait_for_device_probe+0x68/0x158 [ 365.565550] device_shutdown+0x24/0x348 [ 365.565561] kernel_restart_prepare+0x40/0x50 [ 365.565578] kernel_restart+0x20/0x70 [ 365.565591] __do_sys_reboot+0x10c/0x220 [ 365.565605] __arm64_sys_reboot+0x2c/0x38 [ 365.565619] invoke_syscall+0x4c/0x110 [ 365.565634] el0_svc_common.constprop.3+0xfc/0x120 [ 365.565648] do_el0_svc+0x2c/0x90 [ 365.565661] el0_svc+0x4c/0xf0 [ 365.565671] el0t_64_sync_handler+0x90/0xb8 [ 365.565682] el0t_64_sync+0x180/0x184 Signed-off-by: Padmanabha Srinivasaiah Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20220118005127.29015-1-treasure4paddy@gmail.com Signed-off-by: Sasha Levin

Revert "drm/vc4: hdmi: Make sure the device is powered with CEC" again

2022-02-05T18:22:06+00:00

This reverts commit 9b0d360fd783c711fc1cafa51f3e03bdf8ca5518 which is commit 20b0dfa86bef0e80b41b0e5ac38b92f23b6f27f9 upstream. It wasn't applied correctly, something went wrong with an attempt to fix it up again, so just revert the whole thing to be back at a clean state. Reported-by: Guenter Roeck Link: https://lore.kernel.org/r/20220205171238.GA3073350@roeck-us.net Reported-by: Alexey Khoroshilov Link: https://lore.kernel.org/r/Yf5lNIJnvhP4ajam@kroah.com Cc: Dave Stevenson Cc: Maxime Ripard Cc: Michael Stapelberg Signed-off-by: Greg Kroah-Hartman

Revert "drm/vc4: hdmi: Make sure the device is powered with CEC"

2022-02-05T18:22:06+00:00

This reverts commit 3a63b718200be5b1997f6eb28e5e688ec58ec41b which is commit 20b0dfa86bef0e80b41b0e5ac38b92f23b6f27f9 upstream. It wasn't applied correctly, something went wrong with an attempt to fix it up again, so just revert the whole thing to be back at a clean state. Reported-by: Guenter Roeck Link: https://lore.kernel.org/r/20220205171238.GA3073350@roeck-us.net Reported-by: Alexey Khoroshilov Link: https://lore.kernel.org/r/Yf5lNIJnvhP4ajam@kroah.com Cc: Dave Stevenson Cc: Maxime Ripard Cc: Michael Stapelberg Signed-off-by: Greg Kroah-Hartman

drm/vc4: hdmi: Make sure the device is powered with CEC

2022-02-05T11:39:54+00:00

Commit 20b0dfa86bef0e80b41b0e5ac38b92f23b6f27f9 upstream. The original commit depended on a rework commit (724fc856c09e ("drm/vc4: hdmi: Split the CEC disable / enable functions in two")) that (rightfully) didn't reach stable. However, probably because the context changed, when the patch was applied to stable the pm_runtime_put called got moved to the end of the vc4_hdmi_cec_adap_enable function (that would have become vc4_hdmi_cec_disable with the rework) to vc4_hdmi_cec_init. This means that at probe time, we now drop our reference to the clocks and power domains and thus end up with a CPU hang when the CPU tries to access registers. The call to pm_runtime_resume_and_get() is also problematic since the .adap_enable CEC hook is called both to enable and to disable the controller. That means that we'll now call pm_runtime_resume_and_get() at disable time as well, messing with the reference counting. The behaviour we should have though would be to have pm_runtime_resume_and_get() called when the CEC controller is enabled, and pm_runtime_put when it's disabled. We need to move things around a bit to behave that way, but it aligns stable with upstream. Cc: # 5.10.x Cc: # 5.15.x Cc: # 5.16.x Reported-by: Michael Stapelberg Signed-off-by: Maxime Ripard Signed-off-by: Greg Kroah-Hartman

drm/vc4: crtc: Copy assigned channel to the CRTC

2022-01-27T11:02:54+00:00

commit eeb6ab4639590130d25670204ab7b6011333d685 upstream. Accessing the crtc->state pointer from outside the modesetting context is not allowed. We thus need to copy whatever we need from the KMS state to our structure in order to access it. In VC4, a number of users of that pointers have crept in over the years, and the previous commits removed them all but the HVS channel a CRTC has been assigned. Let's move this channel in struct vc4_crtc at atomic_begin() time, drop it from our private state structure, and remove our use of crtc->state from our vblank handler entirely. Link: https://lore.kernel.org/all/YWgteNaNeaS9uWDe@phenom.ffwll.local/ Link: https://lore.kernel.org/r/20211025141113.702757-4-maxime@cerno.tech Fixes: 87ebcd42fb7b ("drm/vc4: crtc: Assign output to channel automatically") Acked-by: Daniel Vetter Signed-off-by: Maxime Ripard Signed-off-by: Greg Kroah-Hartman

drm/vc4: Fix non-blocking commit getting stuck forever

2022-01-27T11:02:53+00:00

commit 0c250c150c74a90db298bf2a8bcd0a1dabed2e2f upstream. In some situation, we can end up being stuck on a non-blocking that went through properly. The situation that seems to trigger it reliably is to first start a non-blocking commit, and then right after, and before we had any vblank interrupt), start a blocking commit. This will lead to the first commit workqueue to be scheduled, setup the display, while the second commit is waiting for the first one to be completed. The vblank interrupt will then be raised, vc4_crtc_handle_vblank() will run and will compare the active dlist in the HVS channel to the one associated with the crtc->state. However, at that point, the second commit is waiting using drm_atomic_helper_wait_for_dependencies that occurs after drm_atomic_helper_swap_state has been called, so crtc->state points to the second commit state. vc4_crtc_handle_vblank() will compare the two dlist addresses and since they don't match will ignore the interrupt. The vblank event will never be reported, and the first and second commit will wait for the first commit completion until they timeout. The underlying reason is that it was never safe to do so. Indeed, accessing the ->state pointer access synchronization is based on ownership guarantees that can only occur within the functions and hooks defined as part of the KMS framework, and obviously the irq handler isn't one of them. The rework to move to generic helpers only uncovered the underlying issue. However, since the code path between drm_atomic_helper_wait_for_dependencies() and drm_atomic_helper_wait_for_vblanks() is serialised and we can't get two commits in that path at the same time, we can work around this issue by setting a variable associated to struct drm_crtc to the dlist we expect, and then using it from the vc4_crtc_handle_vblank() function. Since that state is shared with the modesetting path, we also need to introduce a spinlock to protect the code shared between the interrupt handler and the modesetting path, protecting only our new variable for now. Link: https://lore.kernel.org/all/YWgteNaNeaS9uWDe@phenom.ffwll.local/ Link: https://lore.kernel.org/r/20211025141113.702757-3-maxime@cerno.tech Fixes: 56d1fe0979dc ("drm/vc4: Make pageflip completion handling more robust.") Acked-by: Daniel Vetter Signed-off-by: Maxime Ripard Signed-off-by: Greg Kroah-Hartman

drm/vc4: crtc: Drop feed_txp from state

2022-01-27T11:02:53+00:00

commit a16c66401fd831f70a02d33e9bcaac585637c29f upstream. Accessing the crtc->state pointer from outside the modesetting context is not allowed. We thus need to copy whatever we need from the KMS state to our structure in order to access it. In VC4, a number of users of that pointers have crept in over the years, the first one being whether or not the downstream controller of the pixelvalve is our writeback controller. Fortunately for us, Since commit 39fcb2808376 ("drm/vc4: txp: Turn the TXP into a CRTC of its own") this is no longer something that can change from one commit to the other and is hardcoded. Let's set this flag in struct vc4_crtc if we happen to be the TXP, and drop the flag from our private state structure. Link: https://lore.kernel.org/all/YWgteNaNeaS9uWDe@phenom.ffwll.local/ Link: https://lore.kernel.org/r/20211025141113.702757-2-maxime@cerno.tech Fixes: 008095e065a8 ("drm/vc4: Add support for the transposer block") Acked-by: Daniel Vetter Signed-off-by: Maxime Ripard Signed-off-by: Greg Kroah-Hartman