kernel/linux.git/drivers/gpu/drm/vc4, branch v4.19.265

drm/vc4: vec: Fix timings for VEC modes

2022-10-26T11:19:39+00:00

[ Upstream commit 30d7565be96b3946c18a1ce3fd538f7946839092 ] This commit fixes vertical timings of the VEC (composite output) modes to accurately represent the 525-line ("NTSC") and 625-line ("PAL") ITU-R standards. Previous timings were actually defined as 502 and 601 lines, resulting in non-standard 62.69 Hz and 52 Hz signals being generated, respectively. Signed-off-by: Mateusz Kwiatkowski Acked-by: Noralf Trønnes Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20220728-rpi-analog-tv-properties-v2-28-459522d653a7@cerno.tech Signed-off-by: Sasha Levin

drm/vc4: dsi: Correct DSI divider calculations

2022-08-25T09:15:05+00:00

[ Upstream commit 3b45eee87da171caa28f61240ddb5c21170cda53 ] The divider calculations tried to find the divider just faster than the clock requested. However if it required a divider of 7 then the for loop aborted without handling the "error" case, and could end up with a clock lower than requested. The integer divider from parent PLL to DSI clock is also capable of going up to /255, not just /7 that the driver was trying. This allows for slower link frequencies on the DSI bus where the resolution permits. Correct the loop so that we always have a clock greater than requested, and covering the whole range of dividers. Fixes: 86c1b9eff3f2 ("drm/vc4: Adjust modes in DSI to work around the integer PLL divider.") Signed-off-by: Dave Stevenson Link: https://lore.kernel.org/r/20220613144800.326124-13-maxime@cerno.tech Signed-off-by: Maxime Ripard Signed-off-by: Sasha Levin

drm/vc4: txp: Force alpha to be 0xff if it's disabled

2022-06-14T14:59:19+00:00

[ Upstream commit 5453343a88ede8b12812fced81ecd24cb888ccc3 ] If we use a format that has padding instead of the alpha component (such as XRGB8888), it appears that the Transposer will fill the padding to 0, disregarding what was stored in the input buffer padding. This leads to issues with IGT, since it will set the padding to 0xff, but will then compare the CRC of the two frames which will thus fail. Another nice side effect is that it is now possible to just use the buffer as ARGB. Fixes: 008095e065a8 ("drm/vc4: Add support for the transposer block") Signed-off-by: Maxime Ripard Acked-by: Thomas Zimmermann Link: https://lore.kernel.org/r/20220328153659.2382206-4-maxime@cerno.tech Signed-off-by: Sasha Levin

drm/vc4: txp: Don't set TXP_VSTART_AT_EOF

2022-06-14T14:59:19+00:00

[ Upstream commit 234998df929f14d00cbf2f1e81a7facb69fd9266 ] The TXP_VSTART_AT_EOF will generate a second VSTART signal to the HVS. However, the HVS waits for VSTART to enable the FIFO and will thus start filling the FIFO before the start of the frame. This leads to corruption at the beginning of the first frame, and content from the previous frame at the beginning of the next frames. Since one VSTART is enough, let's get rid of it. Fixes: 008095e065a8 ("drm/vc4: Add support for the transposer block") Signed-off-by: Maxime Ripard Acked-by: Thomas Zimmermann Link: https://lore.kernel.org/r/20220328153659.2382206-3-maxime@cerno.tech Signed-off-by: Sasha Levin

drm/vc4: fix error code in vc4_create_object()

2021-12-01T08:27:42+00:00

[ Upstream commit 96c5f82ef0a145d3e56e5b26f2bf6dcd2ffeae1c ] The ->gem_create_object() functions are supposed to return NULL if there is an error. None of the callers expect error pointers so returing one will lead to an Oops. See drm_gem_vram_create(), for example. Fixes: c826a6e10644 ("drm/vc4: Add a BO cache.") Signed-off-by: Dan Carpenter Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20211118111416.GC1147@kili Signed-off-by: Sasha Levin

drm/vc4: drv: Add error handding for bind

2020-11-10T11:36:00+00:00

[ Upstream commit 9ce0af3e9573fb84c4c807183d13ea2a68271e4b ] There is a problem that if vc4_drm bind fails, a memory leak occurs on the drm_property_create side. Add error handding for drm_mode_config. Signed-off-by: Hoegeun Kwon Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20201027041442.30352-2-hoegeun.kwon@samsung.com Signed-off-by: Sasha Levin

drm/vc4/vc4_hdmi: fill ASoC card owner

2020-10-01T11:14:52+00:00

[ Upstream commit ec653df2a0cbc306a4bfcb0e3484d318fa779002 ] card->owner is a required property and since commit 81033c6b584b ("ALSA: core: Warn on empty module") a warning is issued if it is empty. Fix lack of it. This fixes following warning observed on RaspberryPi 3B board with ARM 32bit kernel and multi_v7_defconfig: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 210 at sound/core/init.c:207 snd_card_new+0x378/0x398 [snd] Modules linked in: vc4(+) snd_soc_core ac97_bus snd_pcm_dmaengine bluetooth snd_pcm snd_timer crc32_arm_ce raspberrypi_hwmon snd soundcore ecdh_generic ecc bcm2835_thermal phy_generic CPU: 1 PID: 210 Comm: systemd-udevd Not tainted 5.8.0-rc1-00027-g81033c6b584b #1087 Hardware name: BCM2835 [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [] (show_stack) from [] (dump_stack+0xd4/0xe8) [] (dump_stack) from [] (__warn+0xdc/0xf4) [] (__warn) from [] (warn_slowpath_fmt+0xb0/0xb8) [] (warn_slowpath_fmt) from [] (snd_card_new+0x378/0x398 [snd]) [] (snd_card_new [snd]) from [] (snd_soc_bind_card+0x280/0x99c [snd_soc_core]) [] (snd_soc_bind_card [snd_soc_core]) from [] (devm_snd_soc_register_card+0x34/0x6c [snd_soc_core]) [] (devm_snd_soc_register_card [snd_soc_core]) from [] (vc4_hdmi_bind+0x43c/0x5f4 [vc4]) [] (vc4_hdmi_bind [vc4]) from [] (component_bind_all+0xec/0x24c) [] (component_bind_all) from [] (vc4_drm_bind+0xd4/0x174 [vc4]) [] (vc4_drm_bind [vc4]) from [] (try_to_bring_up_master+0x160/0x1b0) [] (try_to_bring_up_master) from [] (component_master_add_with_match+0xd0/0x104) [] (component_master_add_with_match) from [] (vc4_platform_drm_probe+0x9c/0xbc [vc4]) [] (vc4_platform_drm_probe [vc4]) from [] (platform_drv_probe+0x6c/0xa4) [] (platform_drv_probe) from [] (really_probe+0x210/0x350) [] (really_probe) from [] (driver_probe_device+0x5c/0xb4) [] (driver_probe_device) from [] (device_driver_attach+0x58/0x60) [] (device_driver_attach) from [] (__driver_attach+0x80/0xbc) [] (__driver_attach) from [] (bus_for_each_dev+0x68/0xb4) [] (bus_for_each_dev) from [] (bus_add_driver+0x130/0x1e8) [] (bus_add_driver) from [] (driver_register+0x78/0x110) [] (driver_register) from [] (do_one_initcall+0x50/0x220) [] (do_one_initcall) from [] (do_init_module+0x60/0x210) [] (do_init_module) from [] (load_module+0x1e34/0x2338) [] (load_module) from [] (sys_finit_module+0xac/0xbc) [] (sys_finit_module) from [] (ret_fast_syscall+0x0/0x54) Exception stack(0xeded9fa8 to 0xeded9ff0) ... ---[ end trace 6414689569c2bc08 ]--- Fixes: bb7d78568814 ("drm/vc4: Add HDMI audio support") Suggested-by: Takashi Iwai Signed-off-by: Marek Szyprowski Tested-by: Stefan Wahren Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20200701073949.28941-1-m.szyprowski@samsung.com Signed-off-by: Sasha Levin

drm/vc4: Fix HDMI mode validation

2020-04-23T08:30:21+00:00

[ Upstream commit b1e7396a1d0e6af6806337fdaaa44098d6b3343c ] Current mode validation impedes setting up some video modes which should be supported otherwise. Namely 1920x1200@60Hz. Fix this by lowering the minimum HDMI state machine clock to pixel clock ratio allowed. Fixes: 32e823c63e90 ("drm/vc4: Reject HDMI modes with too high of clocks.") Reported-by: Stefan Wahren Suggested-by: Dave Stevenson Signed-off-by: Nicolas Saenz Julienne Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20200326122001.22215-1-nsaenzjulienne@suse.de Signed-off-by: Sasha Levin

drm/vc4: fix fb references in async update

2019-06-15T09:54:11+00:00

commit c16b85559dcfb5a348cc085a7b4c75ed49b05e2c upstream. Async update callbacks are expected to set the old_fb in the new_state so prepare/cleanup framebuffers are balanced. Calling drm_atomic_set_fb_for_plane() (which gets a reference of the new fb and put the old fb) is not required, as it's taken care by drm_mode_cursor_universal() when calling drm_atomic_helper_update_plane(). Cc: # v4.19+ Fixes: 539c320bfa97 ("drm/vc4: update cursors asynchronously through atomic") Suggested-by: Boris Brezillon Signed-off-by: Helen Koike Reviewed-by: Boris Brezillon Signed-off-by: Boris Brezillon Link: https://patchwork.freedesktop.org/patch/msgid/20190603165610.24614-5-helen.koike@collabora.com Signed-off-by: Greg Kroah-Hartman

drm/vc4: Fix compilation error reported by kbuild test bot

2019-05-02T07:58:56+00:00

commit 462ce5d963f18b71c63f6b7730a35a2ee5273540 upstream. A pointer to crtc was missing, resulting in the following build error: drivers/gpu/drm/vc4/vc4_crtc.c:1045:44: sparse: sparse: incorrect type in argument 1 (different base types) drivers/gpu/drm/vc4/vc4_crtc.c:1045:44: sparse: expected struct drm_crtc *crtc drivers/gpu/drm/vc4/vc4_crtc.c:1045:44: sparse: got struct drm_crtc_state *state drivers/gpu/drm/vc4/vc4_crtc.c:1045:39: sparse: sparse: not enough arguments for function vc4_crtc_destroy_state Signed-off-by: Maarten Lankhorst Reported-by: kbuild test robot Cc: Eric Anholt Link: https://patchwork.freedesktop.org/patch/msgid/2b6ed5e6-81b0-4276-8860-870b54ca3262@linux.intel.com Fixes: d08106796a78 ("drm/vc4: Fix memory leak during gpu reset.") Cc: # v4.6+ Acked-by: Daniel Vetter Signed-off-by: Greg Kroah-Hartman